摘 要本次設計是圍繞節能、環保熱點來展開研究，設計了由 PLC 系統控制，液壓系統來完成動作的垃圾壓榨機。 本次課題選用液壓傳動來作為其動作裝置，具有傳統的液壓傳動的優勢，如穩定性好，傳動效率高。同時，也在系統中加入了監測壓力表等設備，更好的保證了系統能穩定的運行，同時也為維修提供了方便。在設計過程中，通過要求的壓力及流量等，選擇了當今標準液壓器件，以保證一旦設備出現故障，以便更換器件，保證工作連續性。由于此次設計的垃圾壓榨機工作環境比較差，需要的適應性強，可靠性高，抗干擾能力強的控制系統，所以本次課題的控制系統采用的是 C20P 系列 PLC。C20P 輸入輸出繼電器點數為 20 點其中輸入繼電器 12 點，輸出繼電器為 8 點。其中 3 個輸入點由行程開關控制，來保證動作位置。急停，啟動，停止各一個輸入點，還有一個壓力繼電器來控制快進轉工進的動作過程。輸出繼電器用來控制電磁閥的電磁鐵。關鍵字：液壓系統 垃圾處理 壓榨機 PLC ABSTRACTThis issue is a focus on energy saving, environmental protection and hot spots to expand the research, design by the PLC control system, hydraulic system to complete the movement of waste crushing machines. The topic chosen as the action of hydraulic transmission equipment, hydraulic transmission with traditional advantages, such as good stability, transmission and high efficiency. , It is also added to the system of monitoring pressure gauges and other equipment, and better able to guarantee a stable operation of the system, and also for the maintenance of convenience. In the design process, by the required pressure and feed speed, etc., choose the standard of today's hydraulic components to ensure that once the equipment failurer to replace the device, to ensure continuity.As the current design of garbage squeezing machine working environment is poor, the conditions of adaptability, high reliability and strong anti-interference ability of control system are needed, so this issue of the control system is the C20P series PLC. C20P input and output relay points for 20 points including 12-point type relay, the output relay for 8 points， in which three input points from the trip switch control, to ensure that action here. Emergency stop, start, stop each one input point, there is a pressure relay to control the fast-forward the process of changing jobs into the action. Output relay used to control the solenoid valve solenoid. Key word：Hydraulic systems PLC Compressors Waste目 錄第一章.緒論 .11.1 垃圾處理市場分析 .11.2.國內外垃圾處理現狀 11.3 垃圾壓榨機簡介 .2第二章.液壓系統的設計 52.1 壓榨機的基本結構設計 .52.2 垃圾壓榨機液壓系統設計 .52.3 液壓系統主要元件作用及型號選擇 .62.4.液壓系統原理動作 7第三章.控制系統的設計 .113.1 PLC 結構及簡介 113.2 PLC 的型號選擇與接口連接極其動作 123.3 下面是具體的指令語句表及解釋 15第四章.液壓系統型號選擇與安全性校驗 .174.1 液壓缸的參數計算 174.2 泵的參數計算 18謝 辭 19參考文獻 21