購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載可得到資源目錄里的所有文件。。?！咀ⅰ浚篸wg后綴為CAD圖紙，doc,docx為WORD文檔，原稿無水印，可編輯。。。具體請見文件預覽，有不明白之處，可咨詢QQ:12401814
編號
無錫太湖學院
畢業設計（論文）
相關資料
題目： 定梁式數控雕刻機機械結構設計
信機 系 機械工程及自動化專業
學 號： 0923164
學生姓名： 范 俊
指導教師： 黃敏 （職稱：副教授）
（職稱： ）
2013年5月25日
目 錄
一、畢業設計（論文）開題報告
二、畢業設計（論文）外文資料翻譯及原文
三、學生“畢業論文（論文）計劃、進度、檢查及落實表”
四、實習鑒定表
無錫太湖學院
畢業設計（論文）
開題報告
題目： 定梁式數控雕刻機機械結構設計
信機 系 機械工程及自動化 專業
學 號： 0923164
學生姓名： 范 俊
指導教師： 黃敏 （職稱：副教授）
（職稱： ）
2012年11月25日
課題來源
自擬。
科學依據（包括課題的科學意義；國內外研究概況、水平和發展趨勢；應用前景等）
（1）課題科學意義
數控雕刻機是一種具備雕刻加工功能的數控機床。大都認為雕刻機是使用小刀具、大功率和高速主軸電機的數控銑床。雕刻機的優勢在雕刻，對零件表面的精細加工，是一種高效、高精度的數控機床。隨著模具工業和工藝美術品制造業的快速發展，國內外市場對數控雕刻機的需求不斷擴大，特別是高端的數控雕銑中心，需求更為旺盛。在制鞋工業、運動器材工業、汽車輪胎制造業等工業領域有廣泛的應用，特別是模具制造業必不可少的機床裝備。
（2）數控雕刻機的研究狀況及其發展前景
數控雕刻機以自身所具有的技術優勢，加上合理的價格，已成為我國消費類電子零配件制造、小型精密模具制造、PCB電路板、五金制品、家具制造等行業重要的機床工具。另外，在LED鋁基板、工藝禮品、金屬電極、金屬眼鏡框加工等領域，也開始使用數控雕刻機。
隨著數控雕刻機應用領域的不斷拓展，其市場規模也不斷擴大。據羅百輝調查，2002～2006年，數控雕刻機小批量應用于模具加工、家具制造行業，處于市場導入期。隨著數控雕刻機技術的不斷成熟和價格趨于合理，其性價比逐漸得到業界的認可，市場快速擴大。進入2007年我國數控雕刻機產銷量突破10000臺，產值超過15億元，標志著國內數控雕刻機產業進入高速成長期；從2007～2010年，在模具加工、家具與五金制造等行業需求繼續快速增長的同時，由智能手機、平板電腦、電子書、GPS等帶動的消費類電子零配件制造業的需求異軍突起，推動數控雕刻機行業迅速發展，2010年國內數控雕刻機產量已突破4.5萬臺。
隨著下游各應用領域對產品加工過程中的高精密、高效率、低耗能、低耗材的要求不斷提升，數控雕刻機自身技術不斷成熟，下游新興應用領域不斷涌現，國內人工成本的不斷增長，原有老舊設備的更新?lián)Q代等等，都將對數控雕刻機市場起到積極的推動作用。未來數控雕刻機行業將持續高速增長。結合各下游行業十二五規劃制定的發展目標，羅百輝預計到2015年全國數控雕刻機產銷量將達到12萬臺。 在市場結構方面，消費類電子產品零配件制造、模具制造、五金制品及家具制造等四大行業仍將是數控雕刻機的主要應用領域。其中，隨著觸摸屏手機、平板電腦的滲透率不斷提高，未來消費類電子產品零配件制造行業對數控雕刻機需求將持續快速增長，到2015年，僅消費類電子產品零配件制造行業，對數控雕刻機需求量就將達到38000臺。
研究內容
① 了解數控雕刻機的工作原理，國內外的研究發展現狀；
② 完成數控雕刻機機械總體方案設計；
③ 完成零部件的選型計算、結構強度校核；
④ 熟練掌握有關計算機繪圖軟件，并繪制裝配圖和零件圖紙，折合A0不少于3張；
⑤ 完成設計說明書的撰寫，并翻譯外文資料1篇。
擬采取的研究方法、技術路線、實驗方案及可行性分析
到數控雕刻機加工工廠參觀，增強對雕刻機系統和結構的認識，構思機床外部結構。去學校圖書館或上網查找有關數控雕刻機改造的書籍，再對其系統內部零件進行設計：機床主傳動系統的設計，機床進給系統的設計，機床主要零部件的設計計算。查閱有關雕刻機的資料，對其主要零件進行校核。撰寫設計書名書，完成雕刻機下體機裝配圖及各主要零件圖的繪制。
研究計劃及預期成果
研究計劃：
2012年11月17日-2013年1月13日：按照任務書要求查閱論文相關參考資料，填寫
畢業設計開題報告書，學習并翻譯一篇與畢業
設計相關的英文材料。
2013年1月15日-2013年3月5日：擬好論文框架，寫好第一章緒論，并構思所需要
的圖紙。
2013年3月8日-2013年3月12日：按照要求修改畢業設計開題報告。
2013年3月14日-2013年4月11日：完成雕刻機機械結構設計，完成機床主傳
動系統、進給系統的設計選擇及機床主要零部件
的設計計算，完成所需圖紙。
2013年4月12日-2013年4月25日：完成有關零部件的選型及校核計算，并校驗圖紙。
2013年4月26日-2013年5月20日：畢業論文撰寫和修改工作。
預期成果：
數控雕刻機機械結構總體裝配圖及主要零部件圖，完成設計說明書的撰寫。
特色或創新之處
① 機床底座采用鑄造結構，確保了整體的穩定性。
② 機床的三軸運動形式采用刀具Y/Z軸進給運動，工作臺作X軸進給運動的定梁式結構，增強了加工的穩定性，保證了加工精度。
③ 機床橫梁導軌的布局采用垂直向的空間式結構，確保了加工的平穩和精度。
已具備的條件和尚需解決的問題
① 現已查閱到數控雕刻機改造的相關資料。
② 需要查閱課本和相關資料，相互比較，以選取最佳方案。
指導教師意見
指導教師簽名：
年 月 日
教研室（學科組、研究所）意見
教研室主任簽名：
年 月 日
系意見
主管領導簽名：
年 月 日
英文原文
Research on a Novel Parallel Engraving Machine
and its Key Technologies
Abstract: In order to compensate the disadvantages of conventional engraving machine and exert the advantages of parallel mechanism, a novel parallel engraving machine is presented and some key technologies are studied in this paper. Mechanism performances are analyzed in terms of the first and the second order influence coefficient matrix firstly. So the sizes of mechanism, which are better for all the performance indices of both kinematics and dynamics, can be confirmed and the restriction due to considering only the first order influence coefficient matrix in the past is broken through. Therefore, the theory basis for designing the mechanism size of novel engraving machine with better performances is provided. In addition, method for tool path planning and control technology for engraving force is also studied in the paper. The proposed algorithm for tool path planning on curved surface can be applied to arbitrary spacial curved surface in theory, control technology for engraving force based on fuzzy neural network (FNN) has well adaptability to the changing environment. Research on teleoperation for parallel engraving machine based on B / S architecture resolves the key problems such as control mode, sharing mechanism for multiuser, real-time control for engraving job and real-time transmission for video information. Simulation results further show the feasibility and validity of the proposed methods.
Keywords: parallel mechanism, engraving machine, influence coefficient, performance indices, tool path planning, force control, fuzzy neural network, teleoperation
1 Introduction
Conventional computer engraving machine has played an important role in industries such as machinery machining, printing and dyeing and entertainment, but it has the inherent disadvantages such as cutting tool can be fed only along the fixed guideway, lower degree-of-freedom (DOF) of cutting tool, lower flexibility and mobility for machining etc. Parallel mechanism has the merits such as high mechanical stiffness, high load capacity, high precision, good dynamic performance etc (Zhen, H.; Ling-fu, K. & Yue-fa, F., 1997). According to the characteristics of parallel mechanism, it has been a hot research topic to apply parallel mechanism to the domain of future machining. By applying parallel mechanism to engraving domain, its inherent advantages can be fully exerted and the disadvantages of conventional engraving machine can be overcome or compensated. But as the special structure of parallel mechanism, the related theory and technology during its engraving is very different from that of conventional engraving machine, and it is a undeveloped research topic by now. In addition, with the development of computer network technology, the new concept and method such as network machining and manufacturing has become hot research topic (GQ, Huang & K.L,, Mak., 2001; Taylor, K. & Dalton, B., 2000; Ying-xue, Y. & Yong, L., 1999). A novel parallel engraving machine with six-axis linkage is proposed in this paper, which uses the 6-PUS parallel mechanism with 6-DOF as the prototype, and some key technologies such as size design, tool path planning, engraving force control and teleoperation are studied on this basis.
2. Confirming of mechanism type and engraving machine's size
2.1 Selection of mechanism and coordinate system
The selection of mechanism type is the first step for designing novel engraving machine, the following reasons make us select the 6-PUS parallel mechanism for designing our engraving machine. Comparing with traditional mechanism, 6-PUS parallel mechanism uses base platform, three uprights layout and high rigidity framework structure and has the merits such as high modularization, high accuracy and low cost. Itsmodel is shown in Fig.1.
Fig. 1. The model of 6-PUS parallel mechanism
As shown in Fig.1, 6-PUS parallel mechanism consists of base platform, dynamic platform and 6
branch chains with same structure, every branch joins with base platform through prismatic pairs
(P), slider of prismatic pairs joins with up end of the fixed length link through universal joint (U),
down end of the fixed length link joins with dynamic platform through sphere hinge (S), so it is
called 6-PUS parallel mechanism. The coordinate system of 6-PUS parallel engraving mechanism
is shown in Fig. 2. In Fig.2, the geometry centers of base platform and dynamic platform plane are
supposed as OB and op respectively. In every branch, the centers of prismatic pairs, universal joint
and sphere hinge are marked with Ai, Bi,, and Ci (i = 1,2, ..., 6) respectively. Coordinate system
OB-XBYBZB is fixed on base platform, taking {B} as briefly. The origin of {B} lies on geometry
center of base platform's up plane, axis ZB is vertical with base platform and directs to up, axis
YB directs to angle bisector of the first and second branch lead screw center line, and axis XB can
be determined with right-hand rule. Supposing the coordinate system set on dynamic platform is
op-xpypzp, taking {P} as briefly, its origin lies on geometry center of dynamic platform, the initial
state of dynamic platform system is consistent with that of base platform system completely.
Supposing the coordinate of op is (0,0, Z) in {B}, this configuration without relative rotation to
every axis is the initial configuration of this mechanism, and Z changing with mechanism's size.
On the basis of coordinate system mentioned, we use influence coefficient theory and the actual
parameters of this mechanism to calculate the first and the second order influence coefficient
matrix of every branch under different configuration. Then, we can get the first and the second
order integrated influence coefficient matrix H of the whole mechanism.
和
The significance and detailed solution process for influence coefficient matrix is omitted here, for more information please refer (Zhen, H.; Ling-fu, K. & Yue-fa, F., 1997).
Fig. 2. Coordinate system of 6-PUS parallel engraving mechanism
2.2 Mechanism performance analysis based on influence coefficient matrix
The performance of engraving machine will change with its size. To find out the better size for all the performance indices of both kinematics and dynamics, we obtain a group of mechanisms by changing its parameters. These mechanisms' length of fixed length links (L) range between 45cm and 55cm (step is 1cm), radius of dynamic platform (R) range between 10cm and 20cm (Step is 1cm). Other parameters of the mechanism is unchanging, so we get 121 mechanisms totally. Taking these mechanisms as research object, we confirm the sample point for every mechanism in its workspace with algorithm PerformanceAnalysis, then calculate the first and the second order influence coefficient matrix in every point. Furthermore, calculate all the performance indices in every sample point and draw all the global performance atlas of 121 mechanisms ultimately. To describe conveniently, we abbreviate the first and the second order integrated influence coefficient matrix Hq to G and H, and use Gω, Hω and Gυ, Hυ as the angular velocity submatrix and linear velocity submatrix of the first and the second order integrated influence coefficient matrix respectively, namely, We can change mechanism's parameters and adjust variable's step in the algorithm PerformanceAnalysis to meet actual analysis. The algorithm is programmed with MATLAB and the global performance atlas of 6-PUS mechanism are drawn (see Fig. 3 to Fig. 8), then the mechanism's performance is analyzed using the atlas. Table 1 shows the results of sample point number (abbr. to SPN) for 121 mechanisms respectively, the fixed link length of mechanism with sequence number (abbr. to SN) 1 is 45cm, its radius of dynamic platform is 10cm, the fixed link length of mechanism with SN 121 is 55cm, its radium of dynamic platform is 20cm, the rest may be deduced by analogy. In addition, table 2 gives the performance indices of some mechanism only, where the mean of SN is same as in table 1.
Description for algorithm PerformanceAnalysis:
PerformanceAnalysis Begin
For L = 45 To 55 / / scope of fixed length link
For R = 10 To 20 / / scope of radius of dynamic platform
SamplePointNumber = 0; / / initialization sample point number is zero for every mechanism
For x =-Maximum To + Maximum moving along Axis X Step 4cm
For y =-Maximum To + Maximum moving along Axis Y Step 4cm
For z =-Maximum To + Maximum moving along Axis Z Step 4cm
For α =-Maximum To + Maximum rotating around Axis X Step 12 °
For β =-Maximum To + Maximum rotating around Axis Y Step 12 °
For γ =-Maximum To + Maximum rotating around Axis Z Step 12 °
If sample point (x, y, z, α, β, γ)? Reachable point of mechanism's
workspace
Calculating the first order influence coefficient matrix and
its Frobenius norm at current point;
If The first order influence coefficient matrix is ??not
singular
SamplePointNumber = SamplePointNumber +1;
Calculating the second order influence
coefficient matrix and its Frobenius norm
calculating condition number at this point with
formula and accumulating sum of performance
indices;
/ / detailed formula is given in the following
of this section
Endif
Endif
Endfor
Endfor
Endfor
Endfor
Endfor
Endfor
Calculating all the performance indices of the mechanism at current size and append the results to corresponding data files for different performance index;
/ / performance index of the mechanism =(accumulating sum of performance indices at all sample points) / SamplePointNumber
/ / There are six data files for performance indices totally: angular velocity, linear velocity,angular acceleration, linear acceleration, force and moment, inertia force
Endfor
Endfor
Drawing all the global performance atlas of 6-PUS mechanism by all the index data files
(Every data file includes the information of 121 mechanisms);
/ / There are six performances atlas totally: angular velocity, linear velocity, angular acceleration, linear acceleration, force and moment, inertia force
End
Table 1. The SPN of 121 mechanisms in experiment
SN
SPN
六個性能指標
角速度
線速度
角加速度
線加速度
力和力矩
慣性力
1
30962
0.17276
0.17442
0.06236
0.11315
0.01521
0.37454
2
28074
0.18248
0.18171
0.08075
0.13276
0.01456
0.40421
3
25848
0.19128
0.18836
0.09932
0.15184
0.01396
0.43136
4
23252
0.20087
0.19545
0.11897
0.17225
0.01348
0.46030
...
...
...
...
...
...
...
...
59
42390
0.21105
0.18995
0.10050
0.01304
0.01304
0.40233
60
37410
0.21915
0.19537
0.11308
0.17355
0.01257
0.42606
61
32446
0.22717
0.20041
0.12312
0.19230
0.01216
0.44929
...
...
...
...
...
...
...
...
119
28942
0.25779
0.20680
0.12265
0.22596
0.01064
0.47030
120
23998
0.26786
0.21185
0.12116
0.24139
0.01041
0.49500
121
19828
0.27714
0.21610
0.11399
0.25527
0.01017
0.51745
Table 2. Six performance indices of some mechanisms
2.2.1 Analysis of kinematics performance indices
2.2.1.1 Global performance indices of angular velocity and linear velocity
As the influence coefficient G of engraving mechanism is not a constant matrix, it makes the measuring index for parallel mechanism based on G not to be a constant matrix also, so we can't utilize one value to measure the good or bad of the dexterity, isotropy and controlling accuracy (Xi-juan, G., 2002). Here, we define parallel mechanism global performance indices of angular velocity and linear velocity as following respectively
Where W is the reachable workspace of mechanism,
anddenote the condition numbers for angular velocity and linear velocity respectively (Where | | · | | denotes Frobenius norm of matrix, superscript '+' denotes generalized inverse matrix, the same mean as following). We can get the performance indices' value of the angular velocity and linear velocity according to the condition numbers of every mechanism's sample points. Replacing the underlined part in algorithm PerformanceAnalysis with two formulas in (1) respectively, we can draw the performance atlas for angular velocity and linear velocity as shown in Fig.3 and fig.4 based on 121 mechanisms' indices values ??of angular velocity and linear velocity. According to the rule that the bigger ηJ (J ∈ {Gω, Gv}), the higher dexterity and controlling accuracy of the mechanism, from Fig.3 we can see that the mechanism performance index of angular velocity is not changing with the link length when the changing range of R is not big, but it has the trend that the bigger R, the better
Fig. 3. Atlas of angular velocity global performance
Fig. 4. Atlas of linear velocity global performance
performance index of angular velocity, furthermore, the index of mechanism angular velocity is better when L = 46.5cm ~ 49.5cm and R = 19.5cm, namely, the output error of angular velocity is smaller. Similarly, from Fig.4 we know that the mechanism index of linear velocity is better when L = 45cm ~ 48cm and R = 19cm, that is to say,the output error of linear velocity is smaller.
2.2.1.2 Global performance indices of angular acceleration and linear acceleration.Considering the influences on acceleration of both the first and the second order influence coefficient matrix, the condition numbers of angular acceleration and linear acceleration for 6-DOF parallel mechanism
are (Xi-juan, G., 2002; Xi-juan, G. & Zhen, H., 2002)
Where, a and b is error coefficient.So the global performance indices of angularacceleration and
linear acceleration for parallelengraving mechanism can be defined as
Where Supposed the mechanism error is smaller than 2%
(that is, a = b = 0.02), replacing the underlined part in algorithm .PerformanceAnalysis with formula (4), we can draw the performance atlas for angular acceleration and linear acceleration as shown in Fig.5 and Fig.6. As same as the evaluating method for velocity performance index, from Fig. 5 we can see that the angle acceleration performance of mechanism is better when nearly L =
45cm ~ 47cm and R = 16cm ~ 20cm, output error is smaller accordingly. Among the 121
mechanism we studied, its maximum is 0.16399.
Fig.5. Atlas of angular acceleration global performance
By observing Fig.6 carefully, we know that performance
of linear acceleration is better when nearly L=45cm~48cm and R=19.5cm, accordingly, output error should be smaller. From above analysis, we know that mechanism size with good indices for linear velocity and linear acceleration is coincidence in some degree among the 121 mechanisms we studied, but performance index of angular velocity and angular acceleration may not the best in the same size, so it can’t get coincidence. Thus, our analysis will be helpful for designing and choosing mechanism by actual needs. Similarly, analyzing method of kinematics performance indices is the same when other parameters of the mechanism are changed.
Fig. 6 . Atlas of linear acceleration global performance
2.2.2 Analysis of dynamics performance indices
2.2.2.1 Analysis of power and moment performance
Index. The condition number of power and moment performance index based on the first order influence coefficient matrix of power GF for 6-DOF parallel mechanism can be defined as(Xi-juan,G.,2002)
Similarly, we define global performance index of power and moment for 6-DOF parallel mechanism as
We suppose that power and moment of parallel mechanism is isotropy when ηJ=1. With formula (5) as condition number, replacing the underlined part in algorithm with formula (6), we can draw the performance atlas for power and moment as shown in Fig.7. From Fig. 7 we can see in the size range of our experiment the performance index for power and moment would have little change with the link length when the radius of dynamic platform is less then 14cm. The performanc index for mechanism’s power and moment will be bigger when L=45cm~46cm and radius of dynamic platform R=10cm,here, performance of power and moment will be better.
Fig. 7. Atlas of global performance of force and moment
2.2.2.2 Analysis of inertia force performance index
Considering both the first and the second order influence coefficient matrix, the condition number of inertia force for 6-DOF parallel mechanism is defined as(Xi-juan,G.,2002)
Where [Gω