喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:414951605 或 1304139763】
========================================喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:414951605 或 1304139763】
========================================
摘 要
手動火焰清理設備一直是鋼鐵企業的常用設備。這項艱苦的工作經常是在高溫，高粉塵及噪聲污染的惡劣環境中進行的。為了改善手工作業環境以及由于手工作業帶來的低效率，高成本等問題，如今鋼鐵行業逐漸重視對鋼坯清理的機械作業的研發。所謂鋼坯火焰清理就是利用高溫火焰的氣割和熔除作用將鋼坯表面缺陷燒除的工序。該工序能有效提高鋼材的軋制質量，為了生產高質量的優質鋼材提供了必要的保證。鋼坯火焰清理按工作溫度分為熱鋼坯火焰清理和冷鋼坯火焰清理；鋼坯火焰清理按操作方式分為手工作業和機械作業方式。其中實現機械作業的裝置稱火焰清理機，他是通過專門燒嘴將氧氣和煉焦煤氣進行混合，燃燒火焰預熱連鑄鋼坯，然后利用高壓純氧流與鋼坯表面產生氧化反應，對鋼坯火焰清理機需要采取機械作業方式，冷鋼坯火焰清理機即可采用手工作業方式，又可采用機械作業方式。冷鋼坯火焰清理即可采用手工作業方式，又可采用計息作業方式，但由于我國目前非常缺乏專門的火焰清理機的設計、制造研發能力，國內鋼坯火焰清理主要采用手工作業冷鋼坯清理方式。
本課題組的工作重點主要有下面幾個方面：
1、 進行鋼坯火焰清理機總體功能分析
2、 進行鋼坯火焰清理機初步設計方案可行性論證
3、 基于確定初步設計方案進行初步結構設計，包括鋼坯翻板、缺陷清理、廢屑排除等典型功能裝置的工作原理和結構設計計算
4、 鋼坯火焰清理機的具體技術指標為：
工作溫度：0°C—50 °C，相對適度：≤90%
工作電源：380V±10% /3相/50HZ
鋼坯臨界尺寸（mm）：（長*寬*高）：(200~300)*（1850~2280）*（2000~4000）
具有鋼坯自動夾緊與松開、自動翻板功能；
燒嘴能自動點火與熄滅，且高度能手動可調；
具有自動排屑功能；
導軌帶有自動防屑塵的防護罩。
關鍵字：鋼坯，火焰清理，火焰清理機，總體方案設計 導軌
Abstract
Manual flame cleaning equipment commonly used in iron and steel enterprises has been the equipment. The hard work is often at high temperatures, high dust and noise pollution, the harsh environments. In order to improve the environment as a result of manual work to bring the low efficiency of manual work, cost and other issues, is now increasing emphasis on the billet steel industry clean-up research and development of mechanical operations. The so-called clean-up is the use of high-temperature flame billet flame gas cutting and melting the role of the slab surface defects in addition to burning processes. The process can improve the quality of rolled steel, in order to produce high quality steel provides the necessary guarantees. Billet flame temperature is divided into hot clean-up by cleaning and cold billet billet flame flame cleaning; billet flame into manual clean-up operation by operation, and mechanical practices. Mechanical operation of the device to achieve them, said flame cleaning machine, he will be through a special burner to mix oxygen and coking coal gas, burning flame preheating continuous casting billets, and then using high pressure oxygen flow with the billet surface oxidation, flame cleaning of steel billet machine need to take mechanical practices, cold steel billet flame cleaning machine can be manually practices, but also can be mechanical practices. Cold billet flame cleaning practices can be used manually, but also can be used interest-bearing practices, but because our country is lack of specialized flame cleaning machine design, manufacturing R & D capabilities, domestic steel flame mainly manual work cleaning up the cold slab clean way.
The main focus of the work our group has the following aspects:
1, the overall function of slab of flame cleaning machine
2, the initial billet flame cleaning machine design feasibility
3, based on the preliminary design to determine preliminary design, including the billet flap, defect clean up, debris excluded from the typical functional device working principle and structure design calculations
4, billet flame cleaning machine specific technical indicators:
Operating temperature: 0 ° C-50 ° C, relatively modest: ≤ 90%
Power supply: 380V ± 10% / 3 phase / 50HZ
Billet critical size (mm): (L * W * H): (200 ~ 300) * (1850 ~ 2280) * (2000 ~ 4000)
Automatic clamping and release with the billet, automatic shutter function;
Automatic ignition and extinguishing of the burner can, and the height can be manually adjusted;
Function with automatic chip removal;
Rail with automatic anti-litter dust shield.
Keywords: billet, flame cleaning, flame cleaning machine, the overall design, rail