帶自動分度機構的法蘭盤加工回轉工作臺的設計【含CAD圖紙】

喜歡這套資料就充值下載吧。資源目錄里展示的都可在線預覽哦。下載后都有，請放心下載，文件全都包含在內，【有疑問咨詢QQ:414951605 或 1304139763】=喜歡這套資料就充值下載吧。資源目錄里展示的都可在線預覽哦。下載后都有，請放心下載，文件全都包含在內，【有疑問咨詢QQ:414951605 或 1304139763】= 徐州工程學院畢業設計（論文）任務書 徐州工程 學院 機械設計制造及其自動化 專業設計（論文）題目 帶自動分度機構的法蘭盤加工回轉工作臺設計 學 生 姓 名 陸愛軍 班 級 04機本2班 起 止 日 期 2008.02.25到2008.06.02 指 導 教 師 陳躍 教研室主任 李志 發任務書日期 2008 年 2月 25 日1.畢業設計的背景：回轉工作臺是各種機床上必不可少的配件，目前應用在各種銑床和數控機床上，它配合步進電動機的自動分度加工在機械領域有更大的應用。它能準確的加工所需要的零件，而且加工方便簡單。2.畢業設計(論文)的內容和要求： 設計內容： 1. 工作臺機械機構設計2. 自動分度控制電路設計設計要求：設計一種專門加工法蘭盤的鉆床工作臺，可以針對不同的法蘭盤，進行自動分度加工，要求分度方便準確，工作臺便于安裝。1A0圖紙三張，分別為系統裝配圖和各零件圖，電路圖；2畢業設計說明書一本（2萬字）；3相關外文資料翻譯（5000字）。3.主要參考文獻：1 實用機械設計手冊上冊，機械工業出版社，實用機械設計手冊編寫組 編，1992 年9月。2 機械精度設計基礎，科學出版社，孫玉芹，孟兆新主編，2004年2月。3 電動機的單片機控制，北京航空航天大學出版社，2002年。4 金屬切削原理，上?？茖W技術文獻出版社，上海紡織工業?？茖W院，劉源燦主編，1984年4月。5 自動控制原理，機械工業出版社，陳玉宏主編，2003年。4.畢業設計(論文)進度計劃(以周為單位)：起 止 日 期工 作 內 容備 注第1周第2周第3，4周第5，6周第7，8周第9周第10周第11，12周第13，14周第15，16周2008.6.2了解設計的機本要求，查閱相關資料查閱相關資料，寫開題報告外文資料翻譯 設計方案比較選擇工作臺設計計算分度部分設計計算分度控制電路設計分度程序設計繪制機械和電路圖撰寫畢業設計說明書答辯準備教研室審查意見： 室主任 年 月 日學院審查意見： 教學院長 年 月 日附錄附錄1英文翻譯Dimensional ControlIn the early days of engineer, the mating of parts was achieved by machining one part as nearly as possible to the required size, machining the mating part nearly to size, and then completing its machining, continually offering the other part to it, until thedesired relationship was obtained. If it was inconvenient to offer one part to the other part during machining, the final work was done at the bench by a fitter, who scraped the mating parts until the desired fit was obtained, the fitter therefore being a fitter in the literal sense. It is obvious that the two parts would have to be done all over again. In these days, we expect to be able to purchase a replacement for a broken part, and for it to function correctly without the need for scraping and other fitting operations. When one part can be used off the shelf to replace another of the same dimension and material specification, the parts are said to be to be interchangeable. A system of interchangeability usually lowers the production costs, as there is no need for an expensive fiddling operation, and it also benefits the customer in the event of the need to replace worn parts. It also, however, demands that the dimension of mating parts be specified, and that dimensional variations, due to machine and operator shortcomings, be taken into account. Some form of inspection must be introduced to ensure that the manufacture is controlled; this is particularly important, because dimensional errors may not be revealed until some time has elapsed, and often many miles from the place where the machining was done.1. Tolerance and Limits of sizeSince it is accepted that it is virtually impossible to manufacture a part without error, or in the rare event of a part being without error, to be able to proclaim it to be perfect (because the measuring instruments are subject to errors), it is necessary to indicate the maximum errors permitted. The draughtsman must indicate the largest and smallest sizes that the limits of size, and the difference between them is called the tolerance, the actual tolerance must be increased with size. The tolerance should be as large as possible, to keep the cost to a minimum.The method of indicating, on a drawing, the permitted tolerance depends mainly upon the type of operation involved, but local preference must also be taken into account. The following examples will illustrate some of the methods used,(1) Unilateral limits. These are usually used when the distance between two faces, or the diameter of a hole or shaft id specified. For example, when a diameter is being ground, the machinist would prefer to aim at the largest size permitted, so that, in the event of his reaching a diameter that is just a little larger than the maximum size permitted, he can take another cut, knowing that he can use up the whole of the tolerance before the job is rejected. A draughtsman might dimension a nominal 75-0.012 mm diameter shaft as D75. Similarly, a nominal 75mm hole might dimensioned as D75-0.012, the same reasoning applies as for shafts.(2) Bilateral limits. These are usually applied when, for example, the position of a hole is specified. The machine operator may position he hole nearer the datum or further from the datum than intended, he must aim between the limits of position, so that the maximum error can be made without causing the part to be rejected. The center distance between two holes would therefore be specified as, for example, 100+0.02mm.2. Fits are concerned with the relationship between two parts. Consider a shaft and a hole combination: if the shaft is larger than the hole, the condition is said to be of interference; and if smaller than the hole, the condition is said to be of clearance. The interference may be such that the two parts can be assembled only by shrinking, or it may be very slight, so that the parts can be assembled by hand-operated press. Similarly, the clearance can be slight, so that the shaft can rotate easily in the hole, or be large, so that there is ample clearance for bolts to pass through.In order that the precise condition is ensured, the limits of size of both the shaft and the hole must be stipulated.(1) Classes of fit. These are classified as follows.Clearance fit. When the limits of size of both the hole and the shaft are such that the shaft is always smaller than the hole, the fit id said to be a clearance fit.Interference fit. When the limits of size of both the hole and the shaft are such that the shaft is always larger than the hole, the fit id said to be a interference fit.Transition fit. When the limits of size of both the hole and the shaft are such that the condition may be clearance or interference, the fit id said to be a transition fit.(2) Hole-based system and Shaft-based system. In order to obtain a range of degrees of clearance, and degrees of interference, it is necessary to use a wide variation of hole sizes and shaft sizes. For example, a manufacturing company could be making a number of parts, all of a nominal 25-mm diameter, but which are all slightly different in actual limits of size, to suit the actual fit required of each pair of parts. This situation could mean that a large number of drills, reamers, gauges, etc. were required.It is logical that, to reduce this number, a standard hole could be used for each nominal size, and the variation of fit e obtained by making the mating shaft smaller or larger than the hole. This is known as a hole-based system. Alternatively, a standard shaft could be used for each nominal size, and the variation of fit is obtained by making the mating hole larger or smaller, as required. This is known as a shaft-based system. a hole-based system is usually preferred, because it standardizes “fixed size” equipment such as reamer and pluggauges; but a shaft-based system is usually also provided, because sometimes it is more convenient to employ a common shaft to which a number of components is assembled, each with a different fit, and sometimes it is convenient to use bar stock without further machining.3. Systems of limits and fits It is convenient to establish a standardized system of limits and fits, not only to eliminate the need for the draughtsman to determine the limits each time an assembly is detailed, but also to standardize the tools and gauges required. A system of limits and fits should cater for a wide range of nominal sizes. To satisfy the various needs of industry, and should cater for a wide range of quality of work. The system should, if possible, be tabulated, to save the user the trouble of having to calculate the limits of size to suit of the class of fit, the quality of the work, and the size of the part.4. British Standard 4500: 1969, ISO limits and fitsThis standard replace BS 4500 is essentially a revision of BS 1961 to bring the British Standard into line with the latest recommendations of the International Organization for Standardization (ISO). The system refers to holes and shafts, but these terms do not only apply to cylindrical parts but can equally well be applied to the space contained by. Or containing, two parallel faces or tangent planes. The system is tabulated,and covers sizes up to 3150mm.The Numerical Controls developmentThe first electronic computer in the world emerged in 1946, this indicates the mankind has created the tool that can strengthen and replace the mental labour partly . It, and mankind those that create to strengthen tool of manual labor compare among agriculture, industrial society, the qualitative leap has arisen , has established the foundation that the mankind enters the information-intensive society . 6 years later, namely in 1952, the technology of the computer was applied to the lathe , the first numerical control lathe has emerged in U.S.A. From then on, the traditional lathe had produced the change of the quality. In nearly half a century, the numerical control system went through two stages and six generations development The numerical control lathe is regarded as the integrated typical products of electromechanics, play an enormous role among mechanical manufacturing industry , solve structure complicated , accurate , batch little , changeable processing problem of part in the modern machine-building well, and can stabilize the processing quality of the products , improve production efficiency by a large margin . But seen from situation which enterprises face at present, because the numerical control lathe price is relatively expensive, ambassadors enterprises are unable to do what one wants very much to do to relatively make the investment once only. Our country can yet be regarded as a kind of better good plan to the numerical control transformation of the ordinary lathe as the lathe big country . This text proposes to the domestic enterprises current situation at present the economic numerical control of the simple and easy type transforms the thinking and design method for technical staff of numerical controls reference.Numerical control transformation mean to ordinary lathe some position make certain transformation generally, match the numerical control device, thus make the lathe have working ability of numerical control, its purpose is for improving machining accuracy of the old equipment and production efficiency, adapt to many variety and production , short run of part , can make industrial grade can process the high-quality part too than low worker at the same time, reduce investment of technological transformation of the equipment ,etc.Price performance on all these for improving been for lathe than,namely last mechanical performance and the working ability not higher with less money. So transform ordinary lathe as numerical control lathe whether one improve numerical control effective way of rate. Generally speaking, carry on the transformation concrete method of numerical control to the existing ordinary lathe, main transmission make change seldom, is it adopt high-accuracy ball guide screw is it is it give axle already existing ordinary guide screw to enter to replace to enter the transmission of giving. Machinery some transformation after finishing , mix M C S - 51 one-chip computer as numerical control system , with walk into electrical machinery urge the component, first class to moderate gear wheel urge X , sport , Z of axle. In our country in the numerical control lathe is transformed , the microcomputers mostly adopt M C S - type 51 one slice of microcomputers of systematic form, it is a result of very large scale integration development, widely used in the controlled field, develop very fast.According to the function level of the numerical control system , can divide the numerical control system into high , middle and low three to block , the low-grade numerical control system can be regarded as the economy numerical control system. The economy numerical control system is as to standard numerical control system, different periods, the meaning of different countries and regions is different. According to practising the instructions for use of the lathe, rational reduced system, lower costs , can be called economily. Different from the economy numerical control system , call the numerical control system with more complete function numerical control system of the whole function, or is called the standard numerical control system.As regards its function, economy numerical control system general resolution ratio is it give speed to be low moving axle count little , man-machine relatively simple excuse in succession to enter. If position /last control system sharply can last numerical control system not economy. As to its structure, make ring numerical control system general high performance, but of simple structure, the fabrication cost is cheap, can be the most economic numerical control system . So economy numerical control system mainly refer to turning on the numerical control system of the ring at the present stage at home.Have close standard numerical control system of ring, economy numerical control system is it change numerical control system right away there is no ample scope for abilities to turn on. In fact , make ring numerical control system use quite extensive even in our country. The high-performance standard numerical control system costs an arm and a leg, a lot of enterprises are difficult to bear . In addition recommend precise festival produce now, with what whom equipment process with low costs and quality can guarantee, process some equipment, if pursue the high precise equipment blindly, then the production cost increases, this is unnecessary.附錄2中文譯文尺寸控制在早期的工程（問題）中，配合零件獲得的方法是，首先盡可能把一個零件加工到所需的尺寸，再將與它相配合的零件加工到接近所需尺寸，不斷將這兩個零件試配，再進一步加工直至獲得所許的配合關系。如果加工中不便于將兩個零件進行試配，則最后的工作是由鉗工在鉗工臺完成，鉗工刮削配合零件直至達到所許配合，因此“鉗工”在英文中用fitter（適當?shù)?，適配的）這一詞。顯然，兩個配合件應該總是在一起（工作）當其中任意一個需要替換時，所有的適配刮削工作又要從頭開始。這時，我們期盼能購買到可以替換壞掉零件的替用品，而無須刮削或其它鉗工操作就能正常工作。當一個零件一從架子上拿來就可以替換同樣尺寸同樣材料規格的另一個零件，就說這個零件是可互換的。具有可互換性的系統不必進行高成本的輔助刮削工作，因此降低了產品的成本。在要替換掉磨損的零件時，零件的可互換性對維護而言也是大有好處的。然而，可互換系統要求配合件的 尺寸必須規格化，還必須考慮由于加工操作的不足之處引入的尺寸變化。必須采用某種形式的檢測方法以確保對加工的控制。這一點非常重要。因為尺寸誤差有時可能要過一段時間才會發現，而此時卻已遠離加工的地方。1 公差與極限尺寸大家知道，事實上零件不可能毫無誤差的加工出來，或者說沒有誤差的零件是不可能的，要說明尺寸的好壞（因為測量儀器必然有誤差），就有必要指出最大允許誤差。繪圖人員必須標明零件正常工作時的最大允許尺寸和最小允許尺寸。這些尺寸的極限值就稱作極限尺寸，它們之間的差值稱為公差。公差的大小取決于所涉及的加工操作類型、機械工的技能、機床的精確度以及零件的尺寸。對于給定級別的公差，實際公差應隨著尺寸的增大而增大。公差應盡可能取大以使加工成本最小。在圖上標注公差時，許用公差主要取決于所用操作類型，但也必須考慮本國的優先級。以下用例子說明用到的一些標注方法：（1） 單邊極限。單邊極限通常用于當兩個面之間的距離，或孔徑、軸徑被指定的情況下。例如，當直徑要圓整時，機械工更愿意向最大允許尺寸圓整，這樣，當他加工到所得直徑尺寸略大于最大允許尺寸時，還可以在整個公差范圍內再切一次而不產生廢品。制圖員可能將公稱直徑是75-0.012mm 的軸標注為D75mm。同樣的，公稱直徑是75mm 的孔也可能標的尺寸是D75-0.012mm，這同樣也適用于軸的標注。（2） 雙邊極限。雙邊極限通常用于：比如當孔的位置已確定的情況下。機床操作人員可能將孔的位置定得較接近或遠離所需數據，而且，當孔的加工已經開始，操作人員不可能改變孔的位置，他必須在尺寸位置限度間加工，以便在最大誤差時不會使零件變成廢品。因此，應將兩個孔的中心距規定出來，比如，為100+0.02mm。2. 配合配合是關于兩個零件之間的關系?？紤]孔和軸的裝配；如果軸的尺寸大于孔的尺寸，這種情況稱為過盈配合；如果軸的尺寸小于孔的尺寸，這種情況稱為間隙配合。過盈配合的兩個零件只有通過收縮才能裝配，或者過盈量非常小可通過用手壓力的操作裝配零件。同樣，間隙非常小，軸可以很容易的在孔中旋轉，或者孔的尺寸大一些，以便于有足夠的間隙供螺栓從中穿過。為了確保精確，孔和軸的極限尺寸都必須予以規定。（1）裝配分類如下：間隙配合 當孔和軸的尺寸界限滿足軸總是小于孔，則其配合為間隙配合。過盈配合 當孔和軸的尺寸界限滿足軸總是大于孔，則其配合為過盈配合。過渡配合 當孔和軸的尺寸界限所處的情況可能是間隙也可能是過盈，則稱為過渡配合。( 2 ) 基孔制和基軸制。為了得到不同程度的間隙和過盈，有必要使孔和軸的尺寸有變化范圍。比如，制造公z_j_(躝_z_司可能生產許多零件，它們的基本直徑都是25mm，但它們的實際尺寸都是在允許極限尺寸內稍有不同，以滿足每對零件的實際裝配要求。這就是說需要大量的鉆頭、絞刀和量具等。從邏輯上看，要減小鉆頭、絞刀和量具等的數量，應對每種基本的尺寸用一個標準的孔，通過把與它配合的軸的尺做得稍大或稍小以獲得不同的配合關系，這就是基孔制。另一種方法，每種基本尺寸都 用一個標準的軸，用比它的尺寸稍大后稍小的孔與它配合以獲得不同的配合關系，這就是基軸制。用基孔制更好些，因為它可使“固定尺寸”設備如絞刀、測量儀等標準化。但也可用基軸制，當要用同一個軸和許多零件裝配實現不同配合關系時用基軸制更方便。有時，直接用棒料進行裝配而無須進一步加工，也使用基軸制。3. 極限尺寸與配合系統建立一個標準化的極限尺寸及配合系統是很方便的，它不但省略了繪圖員每次確定裝配確定極限尺寸的需要，而且還可使刀具及量具標準化。一種極限尺寸及配合標準應適用于不同的質量范圍的工件。如果可能，這個系統應做成表格形式以免除使用者根據配合種類工件質量及零件尺寸來計算尺寸的麻煩。4. 英制標準4500：1969，ISO極限尺寸及配合這個標準取代了bs1961，可以是英制的尺寸也可以是公制的尺寸 。除了完全采用公制外，基本上是的改進把英國標準和最近推薦的國際標準化組織結合起來。這個系統引用的是軸和孔，但這些術語不僅適用于圓柱型的工件，也同樣適用于包含兩個平行面或矩形面的地方。把這個系統列成表，其尺寸范圍達到3150mm。數控車床的發展1946年誕生了世界上第一臺電子計算機，這表明人類創造了可增強和部分代替腦力勞動的工具。它與人類在農業、工業社會中創造的那些只是增強體力勞動的工具相比，起了質的飛躍，為人類進入信息社會奠定了基礎。6年后，即在1952年，計算機技術應用到了機床上，在美國誕生了第一臺數控機床。從此，傳統機床產生了質的變化。近半個世紀以來，數控系統經歷了兩個階段和六代的發展。數控機床作為機電一體化的典型產品，在機械制造業中發揮著巨大的作用，很好地解決了現代機械制造中結構復雜、精密、批量小、多變零件的加工問題，且能穩定產品的加工質量，大幅度地提高生產效率。但從目前企業面臨的情況看，因數控機床價格較貴，一次性投資較大使企業心有余而力不足。我國作為機床大國，對普通機床數控化改造不失為一種較好的良策。本文針對目前國內企業現狀，提出簡易型經濟數控改造思路和設計方法供數控技術人員參考。數控改造一般是指對普通機床某些部位做一定的改造,配上數控裝置,從而使機床具有數控加工能力,其目的是為了提高老設備的加工精度和生產效率,適應多品種和小批量零件的生產,同時可以使技術等級較低的工人也能加工出高質量的零件,減少設備技術改造的投資等。所有這些都是為了提高機床的價格性能比,即用較少的錢得到較高的機械性能和加工能力。因此,把普通機床改造為數控機床是一條提高數控化率的有效途徑。一般來說,對現有普通車床進行數控改造的具體做法是,主傳動系統一般不作變動,進給傳動系統中采用高精度的滾珠絲杠替換進給軸原有的普通絲杠。機械部分改造完成后,配上-51單片機作為數控系統,用步進電機作驅動元件,經過一級減速齒輪驅動、軸的運動。在我國數控機床改造中,微型計算機大多采用51型系統單片微型計算機,它是超大規模集成電路發展的產物,在控制領域中得到廣泛的應用,發展非常迅速。按數控系統的功能水平，可以把數控系統分為高、中、低三擋，低檔數控系統即可認為是經濟型數控系統。經濟型數控系統是相對標準數控系統而言的，不同時期，不同國家和地區的含義是不一樣的。根據實習機床的使用要求，合理簡化系統，降低成本，即可稱為經濟型。區別于經濟型數控系統，將功能比較齊全的數控系統稱為全功能數控系統，或稱為標準型數控系統。就其功能而言，經濟型數控系統一般分辨率和進給速度較低、連動軸數少、人機借口較簡單。如點位/直線切削控制系統都可以認為是經濟型數控系統。對其結構而言，開環數控系統一般性能不高，但結構簡單，造價低廉，可以說得上是最經濟的數控系統。所以，經濟型數控系統在國內現階段主要是指開環數控系統。并不是有了閉環的標準型數控系統，經濟型數控系統或開換數控系統就無用武之地了。事實上，開環數控系統在我國應用還相當廣泛。高性能的標準型數控系統價格昂貴，許多企業難以承受。此外，現在都提倡精節生產，用什么設備加工的成本低并且質量能保證，就用什么設備加工，若盲目追求高精設備，則生產成本增加，這是不必要的。