購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載可得到資源目錄里的所有文件。。。【注】：dwg后綴為CAD圖紙，doc,docx為WORD文檔，原稿無水印，可編輯。。。具體請見文件預覽，有不明白之處，可咨詢QQ:12401814
河南機電高等專科學校畢業設計說明書
摩托車燈罩注塑模
摘 要
本文介紹了摩托車燈罩模具設計過程。本設計對塑件在模具中的位置和分型面位置、選擇澆注系統與排氣系統、成型零件的結構、合模導向機構、推出機構、側向分型與抽芯機構、溫度調節系統的設計方案做了充分的論證，并優化選取最合理的設計方案。對于塑件的側孔處理，采取了斜導柱側抽芯脫模，帶有脫模斜度的孔，則利用塑件的脫模斜度替代側抽芯，簡化了模具結構。通過對型芯支承板和型腔板的計算，保證了模具的正常使用，優化了模具的結構設計，使得模具結構緊湊。
關鍵詞：注射模；斜導柱側抽芯；擠出模；
Injection Mold for motorcycle lampshade
Abstract
This text introduced the mould design process of the motorcycle lampshade. Determining the plastic part in mould and selection of the parting line, the feed and runner system design, the core/cavity creation structure design, the guide pin and guide bush , the plastic ejector structure , external undercuts and cooling and ejection system designing, they all be analyzed in this text, and choose the best design. With the hole in the side of product deal with Angle Pin, if the hole oblique, make the use of tilted detrusion straight, so the structure of the mould will be simplify. By the caculate of the cavity plate and backing plate, make the mould used working order, optimized the mould structure, make the mould structure compact. And we has demonstrated the structure of the mould in the design of the blow mould, such as the form of knife edge and the cooling system. We has compared the form of the co-extrusion mould ,and we has selected the type of the co-extrusion machine accord the need of the producing condiction of the product.
Keywords: injection mould; Later parting Core with Angle Pin; processing teachnology.