喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:414951605 或 1304139763】
========================================喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:414951605 或 1304139763】
========================================
外文文獻翻譯
（屆）
New Steering Mechanism for Wheeled Mobile Robots
新創造的輪式督導機制移動機器人
學生姓名
學 號
院 系
專 業
指導教師
完成日期
New Steering Mechanism for Wheeled Mobile Robots
Siaibe Marie Bernard, FU Yi-li, XU He, MA Yu-lin
(School of Mechanical and Electrical Engineering, Center of Advanced Manufacturing Technology,Harbin Institute of Technology Harbin 150001,China,E—mail：sidibebernard@yaho.Fr)
Abstract：A new castor wheel mechanism for Omni-directional mobile platform is presented. A motion of translation is transformed into a rotation to steer the wheel with the help of a helical path fits into a translation joint and three rollers whose axes are connected to the driving shaft of the wheel. When the path moves in translation it acts on the rollers for steering. The path-roller friction transmission. The wheel kinematics and the maneuverability have been analyzed.
Key words：castor wheel；helical path；friction；roller；maneuverability；mobility
CLC number：TP24 Document code：A Article ID：l0o5-9l13(2007)02-0184-05
Mobile platform has attracted various researches in robotic applications such as wheelchair,car-like-robotetc.Different categories of Omni-directional mobile platform s have been presented significantly over the last 20 years. Their mechanical structures are mainly differentiated and characterized by the wheel echanisms.which determine their mobility【1】.It has been shown that only robots equipped with three castor wheels or three universal wheels have fu兒mobility (homonymic and mni-directional）【5】.The universal wheels present several drawbacks such as low load capacity-Periodical bump leading to a vibration【8】.Their mechanism is usually complex ,with many parts increasing the weight of the mobile platform. The three castor-Wheeled mobile robot main drawbacks is that it needs at least four actuators (three for steering and at least one for drive).Some examples exist with six actuators, three driving and three steering actuators .This phenomenon leads to some singularities in control. But it has the advantage of carrying important load[9] .Up to now new researches are going on castor wheeled mobile robot【2.3】 , and most of mobile robots for manipulation have only conventional wheel[9],The interest of our research consists of a design of new type of castor wheel mechanism with a connection of elementary joints (spin, linear and screw joints).The interest of our work is the improvement of the maneuverability.
For that we have shown in Section 4 that an elementary linear displacement of the joint can produce an important steering angle of the wheel because the steering angle of our mechanism depends on the linear displacement of a joint. The kinematics is given in Section 2.
1 Wheel Architecture
1.1 Description
The computer model is represented in Figs.1—3 represent the kinematical chain of the wheel mechanism. It has 3 rollers (Fig.2) able to rotate freely about their axis. Each of them has a free revolute joint with a shaft. The three shafts are built in to each other and fit to the wheel shaft and the revolute joint4 (Figs.1 and 3)
So the ensemble of this connection constitutes the wheel link (wheel suspension) which can turn about the vertical axe passing trough the centers of joints 1,3 and 4 (Fig.3).The shaft divided into two different forms：cylindrical form at one side and prismatic at another one (Fig.1).
At the down side is a cylinder forming with the wheel link a revolute joint(joint4) and the upper side is prismatic built in the platform and forming with the cylinder of the helical path a translation joint1.The aim of the latest cited is to provide a translation motion to the helical path rea1ized around a cylinder(Fig.1,part with gold color)。
1.2 Kinematics Description
The kinematics representation of the mechanism is in Fig.3.In fact. the helical path and rollers connection can be considered as a screw joint. The path is a screw constrained in rotation about vertical axis by joint l and the rollers consist of a nut constrained in translation about the same axle by joint 4.Joint1 is actuated in translation. When it moves the path acts on the rollers. At their turn, animating by a rotation about the vertical axe. They react on the wheel link and finally on the wheel.
The eccentricity e and the height h remain constant whatever the posture of the platform. The use of rollers rolling without slipping inside the path is important to avoid coulomb friction even if they make the mechanism little bulky.
2 Path-roller Friction
Let us consider a cylinder in a coordinate system (o X, Y, z) and free of rotation about its axle (Fig.4 (a)).The cylinder and its axle ale free to rotate about and a vertical ax le distant of R from the wheel. An inclined plan with angle 6 is in contact with the cylinder. When the plan translates with respect to axis .The contact line (cylinder—plan) moves with respect to axis Y and the cylinder rotates of angle about the vertical axle. This angle corresponds to the rotation angle of the contact line.
These different motions can be expressed as follow
Where displacement of the plan with respect to axis z and Y is is the linear displacement of the contact point with respect to axis Y.The linear displacement of R the cylinder is equivalent to y. Then Eq.(1) Becomes
The parameters of a screw (Fig.4(b)) are：the diameter 2R the thread inclination 6 and the pitch P.They are related by
Finally the relation between the steering and the displacement of the translation joint by a combination of Eq.(2) and (3)
Eq.(4)relates the linear displacement of the prismatic joint of the helical path to the steering angle of the wheel.
3 Kinematics
The kinematics of wheeled mobile robot can be found in Refs[6～7].In this section we have added to these results the changes required by our mechanism.
In Fig.5,OXY and P XI Y1 represent the world coordinate and the robot coordinate .The robot posture is defined in the world coordinate by：x ,Y and .
X, Y are the coordinate of the point P and 0 is the robot orientation
The rotation matrix expressing the orientation of OXY with respect to the platform frame PX1Y1 is given by
Wheel parameters are：e is the eccentricity of the whee1 .It represents the distance between the centers of the wheel B the rotation axe passing by point A of the platform. l and a are the polar coordinates of A with respect to PXIY1(Fig.5).The wheel radius is defined by r is and P is the pitch helical path of wheel mechanism. Wheel variables are and.
The posture of the translation joint is represented by z of wheel I with respect to axis (Fig.3). Represents the rotation angle of the wheel I about an axis passing by the wheel center B.
The kinematics constraints of a traditional castor wheel are obtained by the projection of the velocities of the robot and the wheel into the wheel plan and in a plane perpendicular to the wheel plane. They are
The constraints of our presented wheel mechanism are obtained by a combination of Esq..(4) And (7) and then (4) and (8)
The last two above equations represent only the constraints of only one wheel. If three of our wheel mechanism is implemented to a mobile robot, the total number of constraints will be six.
4 Examples
In this section, we consider an example of a typical car—like-robot,I.e.A mobile robot equipped with two Passives fixed standard wheels and one castor wheel of our type and each wheel are distant of Z to the origin P 0f the robot rame(Fig.6).We assume that all of the three wheels have the same radius r and the robot is steered and driving by the castor whee1.W e also assume that the ground is an horizontal plane and there is no sliding or friction between wheels and ground.
The fixed standard wheel parameters are represented in Fig.7.As f0r the castor wheel, its kinematics constraints are obtained by projecting of the different velocities in wheel plane and in a plane perpendicular to the wheel plane .They are
Due to the arrangement of the three wheels in Fig.6,we have the following values：
.With these values a system forming by Eq.(11)(i=1,2 for the two fixed standard wheels)and Eq.(9)(For the castor whee1) can be written as
A system forming by Eq(12)(i=1,2)(for the two fixed standard wheels)and Eq.(10)(For the castor wheel) can be written as
Eq. (13) and (14) represent the robot kinematics constraints. The helical path. This is the steering mechanism, intervenes only during the robot steering process. In this example we consider as in pure rotation process then the components x and y of matrixbecome zero. We also consider that the steering and driving angular velocities of whee1.3 are equal .After some calculations Esq..(13) And (14) become
By eliminating 3 in the last 2 equations and using values in Tab.1 we obtain the following relation
Which is represented in Fig.8.All couple (z, P) that vanish Eq. (1 7) will satisfy the assumption, which is considering the robot in pure rotation.
5 The Interest of the Mechanism
Given two wheeled mobile robots of equal mobility but different maneuverability, the more maneuverable robot will typically be advantageous in cluttered environments. A vehicle’s maneuverability is characterized by its ability to perform movements that combine multi-Dle degrees of freedom [10].Three castor—wheeled mobile robot has good values of degree of mobility (6 =3)and degree of steeribilitybut the maneuverability is closely linked to its design. In theory it is easy to steer a castor wheel straight by an actuator. But during the steering process some frictions occur opposing forces .the torque sometime should be multiplied. A rapid reaction in steering is needed when decision is made to turn. This is maneuverability. These two situations are the reasons why the need of mechanism for steering a castor wheel. In our case, the steering angle is a function of the pitch P
For a fixed displacement of z = 10 mm.Fig.9 shows the values of B for the chose of p during design. The system is more maneuverable for any P mini corresponding to any B maxi.
6 Conclusions
Since the beginning of mechanics a lot of simple rolling mechanisms got a castor wheel .In the field of robotic systems it has a particular importance for transportation an exploration .This paper brings a new type of castor drive to this field .In this paper, we have examined the design of a new steering mechanism .Its kinematics and the maneuverability have been analyzed.
References：
[1] Myung-Jin Jung, JonG—Hwan Kwa.Mobility augmentation of conventional wheeled bases for omni.directional motion.IEEE Transaction on Robotics and Automation.2002.
[2] Dong—Sun Kim,Wook Hyun Kwon,Hong Sung Park.Geometric kinematics and applications of a mobile robot.International Journal of Control, Automation and Systems,2003：1598—6446.
[3] Haoyong Yu,Steven Dubonsky,Adam Skwersky.Omni—directional mobility using active split offset castors.ASME(American Society of Mechanical En~neers),2004.
[4] Ferriere L,Campion G,Raucent B.ROLLMOBS,a new drive system for omnimobile robots.ROBOTICA.2001.
[5] 1 Ferriere L,Raucent B,Campion G.Design of omnimobile robot wheels.Procedings of the 1996 IEEE on Robotics and Automation.1996.
[6] Campion Guy,Bastin G,D’And~a—Novel B.Structural properties and classification of kinematic and dynamic models of wheeled mobile robots.IEEE rransactions on Robotics and Automation.1 996.
[7] Tang C P,Bath R,Krovi V.Decentralized kinematics control of Payload transport by a system of mobile manipulators. Proceeding of IEEE on Robotics and Automation, 2004.
[8] Fisette P,Ferriere L,Raucent B,et a1.A muhibody approach for modeling universal wheels for mobile robots.Elsevier Mechanism and Machine Theorie,2000,35：329—351.
[9] Fu Yili,He Xu,Wang Shuoguo,et a1.Topological analysis and control on mobile robo t with partially.failed propulsive whee1.Proceedings of 2005 IEEE International Conference on Robotics and Automation(ICRA2005).Barcelona.Spain,2005.
新創造的輪式督導機制移動機器人
（校機械與電氣工程中心,先進制造技術,哈爾濱市技術學院 哈爾濱150001,
電子郵箱： sidibebernard@yaho.fr ）
摘要：提出了一種新的蓖麻車輪機制,對全方位移動平臺進行了稱述.議案的翻譯轉化輪流掌舵車輪與幫助一個螺旋路徑怎樣可以成為一個翻譯聯合和三輥軸連接到動軸的車輪. 當?shù)缆返呐e動,在翻譯它的行為,督導輥的運動,對徑輥摩擦傳動,車輪運動學和可操作性進行了分析。
關鍵詞：蓖麻車輪；螺旋路徑；摩擦；壓路機；機動性；調動性。
分類號：文件編號：tp24 ,文章編號： l0o5 - 9113 （ 2007 ） 02-0184-05
移動平臺吸引了各種研究機器人的應用,如輪椅,汽車類,不同類別的全方向移動平臺的鋪陳大大超過過去20年.他們的主要機械結構,是有區別的,并用車輪機制。 其中10.1測定其流動性,它已經表明,只有機器人配備3腳輪或三個車輪的普及有富兒流動性（完整和全方位）。普遍輪子,目前一些缺點,如低負荷能力顛簸導致了振動,其機理通常是復雜的,具有許多零件增加重量的移動平臺三個蓖麻輪式移動機器人的主要缺點是它至少需要4個驅動器（三位為指導,并至少有一名為驅動器）。一些例子,存在著6個作動器,3名駕駛和3個督導作動,這現象導致一些奇異控制。但這樣做的好處是攜帶重要負荷[9],直至現在新的研究正在進行當中蓖麻輪式移動滾裝博特等,和大多數的移動機器人操縱的,只有常規輪[9] ,有興趣的,我們的研究包括一個設計的新型蓖麻車輪機制,以連接初等伸縮縫（自旋,線性和螺絲接頭） 。本港利益工作,是要提高機動性。
為此,我們已經表明,在第4條中說,一個初等線性位移的聯合能產生的一個重要轉向角的車輪由于轉向角度,對我們的機制依賴于線性位移的聯合。
一 輪式結構
1.1 說明
計算機模型為代表的是在圖1-3,代表了運動鏈的車輪機制。它有3個滾子（圖2）能夠自由地轉動自己的軸。他們都擁有一個自由旋轉聯合軸。這三個軸都內建于對方,適合方向盤軸和旋轉軸聯合4 （圖1和3）。
所以就此構成了車輪環線（車輪懸架） ,它可以把垂直斧頭及槽中心的關節1,3和4 （圖3）。豎井分成兩個不同形式：圓柱形式在一邊,棱柱形,在另一次（圖1）。往下看,一邊是圓柱形成與車輪連接在一起,旋轉聯合（聯合4）及上側是棱柱形,建于平臺并形成與缸的螺旋走這條路,翻譯聯合（聯合1） ,該公司最新舉的目的是,意識到要提供一個平移運動,以螺旋路徑圍繞缸（圖1 ,部分黃金色）。
1.2 運動學描述
運動學代表該機制在圖3上.事實上螺旋路徑和滾筒方面,可以被視為一個螺絲釘關節路徑是一個螺絲釘?shù)募s束,在旋轉垂直軸線上的聯合L ,并輥構成一個螺母受限于翻譯大約同一軸聯合4。聯合1是驅動在翻譯.當在移動路徑與滾筒提議通道法案的時候,經過一關于垂直斧,對輪連接,并最后對輪子上作出反應。
偏心E和高度h保持恒定,無論姿態的平臺。使用的軋輥,即使他們的機制不是太笨重,重要的是要避免庫侖摩擦。
二 徑輥摩擦
讓我們考慮一個圓柱坐標系（X , Y , Z ）的和自由的旋轉約其車軸（圖4 （ a ） ）。汽缸及軸的自由旋轉和車輪垂直。傾斜計劃與角六是在接觸調節器。當計劃轉化方面的主軸。接觸線（圓柱計劃）的動作與軸Y和汽缸旋轉的角度對車軸垂直。這個角度對應于旋轉角度的接觸線。
這些不同的運動可以表示為
軸Z和Y是線性位移的接觸點,R取代柱是等于y,式（ 1 ）變成
參數螺絲釘（圖4 （ b ） ）有：直徑為2 r把螺紋傾角6和瀝調子P是相關的,由
結合式（ 2 ）及（ 3 ）最后可得
三 運動學
在參[6?7〕,可以發現,輪式移動機器人的運動學。在本節中,我們已經將所需要的機制加入到這些結果的變化。
在圖5 ,OXY和Px1y1代表世界坐標與機器人坐標。機器人的態度將在世界坐標：X , Y ,及中定義。
圖中X , Y是坐標點, P和0是機器人方向。
轉動矩陣，表示OXY的關于從PX1Y1站臺結構得到方向
車輪的參數是：車輪的偏心是E,它代表著它們之間的距離為中心的車輪b和由A點的平臺之間的距離。 L與a是極坐標pxiy1 （圖5）中的參數。車輪半徑是指由R是與P是螺距螺旋路徑車輪機制。輪式變數和。
連接處被代表經過關于軸輪子i的z(Fig.3).三個代表旋轉角度的方向盤I關于一個軸途經車輪中心B 。
傳統運動學限制了的蓖麻輪推算的速度,機器人和輪式到車輪計劃，并在一個平面垂直于車輪飛機,他們是
我們提出了車輪機制的局限,得到了由多種方法，由（4）及（7） ,然后再由（4）及（8）
過去兩年以上方程只代表制約,只有一個車輪,如果我們輪子機械裝置的三被向一活動的,是實施以移動機器人,其總的約束是6。
四 舉例
在本節中,我們考慮的一個例子,一個典型的汽車式機器人, i.e. a移動機器人配備有兩個無源定額標準車輪和一個車輪蓖麻我們的類型和每個車輪都是遙遠的Z為由來取消p的,該機器人框（圖6 ）,我們假設所有的三個車輪有相同的半徑R和機器人是帶領和駕駛由蓖麻車輪 。瓦特e還以為地面是一個水平面,并有沒有滑動或摩擦之間的車輪和地面。
定額標準車輪參數代表圖7.就像蓖麻車輪,它的運動學約束得到投射的不同速度在砂輪機,并在一個平面垂直車輪飛機,他們是
由于安排的三個車輪圖6,我們有以下幾點值為：,這些價值體系,形成由式（ 11 ） （I = 1,2為兩個固定的標準車輪）和式（ 9 ） （為蓖麻車輪 ） ,可以寫
一個制度的形成是由式（12） （I = 1,2 ）, （為兩個固定的標準車輪）和式（10）（為蓖麻車輪）可以寫
式（13）及（14）代表機器人運動學約束螺旋路徑。這督導機制的介入,只有在機器人的轉向過程,在這個例子中,我們認為在純旋轉過程中,然后組成X和Y的矩陣變成零,我們也認為,督導及車輪駕駛角速度3都是平等。經過一番計算，式（13）和（14）成為
通過消除3 ,在過去2方程,并用價值觀tab.1我們得到如下關系
由圖8（z , p）可知,消去式（1 7）將符合假設,這是考慮到機器人的純旋轉。
五 利益機制
鑒于兩輪式移動機器人的平等流動,但不同的可操作性,更便于操作的機器人通常會帶來好處,在雜亂的環境中。車輛的機動性,其特點是有能力執行動作結合起來。蓖麻輪式移動機器人具有良好的價值觀念一定程度的流動性（6 = 3）和自由程度 但可操作性是緊密相連的,其設計在理論上是容易引導對待車輪直由一個致動器,但在督導過程中存在一些因摩擦而發生的抗力,扭矩在一段時間里成倍增加。快速反應,在轉向時,是需要做出決定,這是機動性,這兩種情況的原因是 在必要的機制下,我們可以督導車輪的一個功能調子p的轉向角度，
一個固定位移的Z = 10 mm.fig.9顯示值B為選擇的P在設計制度更有可操作性，任何p的最小值對應的b最大。
六 結論
從力學的開頭起許多簡單機械裝置被得到一個小腳輪輪子,在外地的機器人系統,它有一個特別重要的交通探索。本文帶來了一種新型的蓖麻,并推動這一領域的合作。在這篇文章中,我們?cè)芯吭O(shè)計一個新的督導機制,對它的運動學和可操作性進行了分析。
參考文獻：
[1] Myung-Jin Jung, JonG—Hwan Kwa.Mobility augmentation of conventional wheeled bases for omni.directional motion.IEEE Transaction on Robotics and Automation.2002.
[2] Dong—Sun Kim,Wook Hyun Kwon,Hong Sung Park.Geometric kinematics and applications of a mobile robot.International Journal of Control, Automation and Systems,2003：1598—6446.
[3] Haoyong Yu,Steven Dubonsky,Adam Skwersky.Omni—directional mobility using active split offset castors.ASME(American Society of Mechanical En~neers),2004.
[4] Ferriere L,Campion G,Raucent B.ROLLMOBS,a new drive system for omnimobile robots.ROBOTICA.2001.
[5] 1 Ferriere L,Raucent B,Campion G.Design of omnimobile robot wheels.Procedings of the 1996 IEEE on Robotics and Automation.1996.
[6] Campion Guy,Bastin G,D’And~a—Novel B.Structural properties and classification of kinematic and dynamic models of wheeled mobile robots.IEEE rransactions on Robotics and Automation.1 996.
[7] Tang C P,Bath R,Krovi V.Decentralized kinematics control of Payload transport by a system of mobile manipulators. Proceeding of IEEE on Robotics and Automation,20o4.
[8] Fisette P,Ferriere L,Raucent B,et a1.A muhibody approach for modeling universal wheels for mobile robots.ELsEVIER Mechanism and Machine Theorie,2000,35：329—351.
[9] Fu Yili,He Xu,Wang Shuoguo,et a1.Topological analysis and control on mobile robo t with partially.failed propulsive whee1.Proceedings of 2005 IEEE International Conference on Robotics and Automation(ICRA2005).Barcelona.Spain,2005.