購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載就能得到。。。【注】：dwg后綴為CAD圖，doc,docx為WORD文檔，【有不明白之處，可咨詢QQ:1304139763】
云 母 片 沖 壓 工 藝 及 模 具 設 計 摘 要 本設計的題目為云母片沖壓工藝及模具設計 體現了薄板類沖裁零件的要求 內容及方向 有一定的設計意義 通過對該零件模具的設計 進一步加強了本人沖壓 模設計的基礎知識 為設計更復雜的沖壓模具做好了鋪墊和吸取更深刻的經驗 本設計運用沖壓成形工藝及模具設計的基礎知識 首先分析了沖裁件的沖壓工藝 性 為確定沖裁工藝方案做好了準備 然后計算沖裁力和模具刃口尺寸 便于選取壓 力機及確定工作零件的尺寸和結構 最后分析了制件的特征 確定模具的設計參數 設計要點及推件裝置的選取 本沖裁件為不規則形狀 為了便于凸模的加工 所以在設計時把凸模設計成直通式 然后 將其鉚接在凸模固定板上 此外 該制件的尺寸較小 為保證凹模的加工精度 在設 計時應將其設計成整體式凹模 同時 為了簡化模具結構采用彈性推件裝置 關鍵詞 沖壓模 整體式凹模 彈性推件 Laminated mica die stamping design the basis of design Abstract The design was entitled laminated mica blanking die design reflectsthe thin parts like punching the request the contents and direction of a certain design significance Parts of the mold through the design has further strengthened my stamping die design of the basic knowledge for the design of more complex stamping die to pave the way and the lessons more profound experience The use of the design process and die stamping forming the basis of design knowledge and analysis of the first blanking of the stamping process to determine blanking of the programme prepared for and then calculating punching power and size Die Cutting Edge For selected press and determine the size and structure of parts of the last parts of the characteristics of the design parameters established mold design features and pushing the select pieces of equipment Blanking of the rules on the shape of the non hole hole in order to facilitate the processing punch punch in the design of the punch designed as a straight through processing and then riveting in its punch fixed board In addition the smaller the size of the parts to ensure the accuracy of processing die the design should be designed to solid die at the same time in order to simplify the structure adopt a flexible mold push pieces of equipment Keywords stamping die solid die flexible pieces of pushing