立輥軋機側壓系統設計【說明書+CAD】

購買設計請充值后下載，資源目錄下的文件所見即所得，都可以點開預覽，資料完整，充值下載可得到資源目錄里的所有文件?！咀ⅰ浚篸wg后綴為CAD圖紙，doc,docx為WORD文檔，原稿無水印，可編輯。具體請見文件預覽，有不明白之處，可咨詢QQ:12401814 立輥軋機側壓系統設計摘要現代帶鋼熱軋過程中，立輥軋機一般被布置在粗軋機前，它的主要作用是破鱗和調寬。為了滿足不同的使用要求，穿過軋輥間的鋼板的寬度是不同的，而軋輥間隙的調整就是通過立輥軋機的側壓系統來實現的。本設計的主要內容就是通過大學里所學的知識對立輥軋機的側壓系統進行綜合的分析，研究，設計，完善，其作用不僅是各種知識的結合運用，也是對設計人員的學習成果和能力的一次檢驗。本設計第一章描述了立輥軋機的用途和特點，以及國內外的發展?fàn)顩r；第二章確定了總體設計方案，主要討論了軋輥系統，萬向接軸，側壓系統的結構和特點；第三章是結構參數的確定，通過壓下量來確定軋輥的輥徑和輥身長度；第四章主要是通過側壓系統的力矩計算來選擇電機；第五章對主要零部件進行校核，設計，包括蝸桿蝸輪，側壓螺絲螺母；第六章是對潤滑系統討論。最后是對設計成果的總結及對設計指導老師和同學的感謝。關鍵詞：立輥軋機，側壓系統，側壓螺絲，側壓螺母The design for press system of rolling millAbstractIn modern hot steel rolling process,the edger is generally arranged in the front of the roughing mill,its main function is to break the scale and adjust the breadth. The width that cuts through the steel plate of roll is different for satisfying the different usage request,but the adjustment to the cleft of roll is carried out by the press system.The main contents of this design is to carry on the comprehensive analysis,research ,design ,perfect to the press system of the rolling mill by the knowledge learning in the university,its function not only is various knowledge to combine the usage ,also be to design the personnel of the study result and an examination of the ability. Chapter 1 describes the use and characteristics of the rolling mill, and domestic and international development condition;Chapter 2 made sure the total design project,mainly discussing the structure and the characteristics of the rolling system,connect spindle and the press system;Chapter 3 is the structure parameter to really settle,made sure the radius of the roll and the face length by reduction;Chapter 4 describes that use the press systems moment to choose the electrical engineering;Chapter 5 carries on the examination and design to the main parts,include the worm,worm gear,housing screw and screw box; Chapter 6 is to discuss to the lubrication system. The end of the design is the summary to design result and the gratitudes to guide and classmate.Key words:rolling mill,press system,housing screw,screw box