拖拉機Ⅱ-Ⅲ檔倒擋撥叉工藝及鉆φ5孔夾具設計【版本2】【含高清CAD圖紙和文檔全套】

【溫馨提示】 dwg后綴的文件為CAD圖，可編輯，無水印，高清圖，壓縮包內文檔可直接點開預覽，需要原稿請自助充值下載，請見壓縮包內的文件及預覽，所見即所得，請細心查看有疑問可以咨詢QQ：414951605或1304139763 系主任批準日期茂 名 學 院 畢 業 設 計（論 文）任 務 書 機電工程 系 機械設計制造及其自動化 專業 04-2 班 學生 周宏霄 一、畢業設計(論文)課題 車床撥叉上螺紋底孔加工鉆床夾具的設計 二、畢業設計(論文)工作自 2008 年 3 月 17 日起至 2008 年6月 20 日止三、畢業設計(論文)進行地點 茂名學院機電工程學院 四、畢業設計(論文)的內容要求 (一)已知條件： （1）、被加工零件的工序圖 （2） 成批生產 (二)、主要內容及要求： （1）、按要求寫出開題報告； （2）、結合課題到工廠進行畢業實習； （3）、收集國內外有關情報資料，查閱文獻資料15篇以上； （4）、翻譯不少于5000字的英語科技文獻； （5）、研究形成總體方案； （6）、設計繪制出夾具的總裝工作圖； （7）、繪制出主要零件圖； （8）、按學校規定格式編寫出不少于20000字的設計計算說明書（含文獻綜述）； （9）、準備和參加畢業答辯。 (三)、主要參考資料： （1）機床夾具圖冊P8 孟憲棟等主編機械工業出版社 （2）巧改機床 陳榕林 張 磊 編著中國農業機械化出版社； （3）金屬切削機床 上、下冊 顧熙棠等主編 上?？萍汲霭嫔?； （4）組合機床設計手冊 機械工業出版社； （5）組合機床設計圖冊 機械工業出版社； （6）機電傳動與控制 鄧星鐘等 華中理工大學出版社； （7）新編機械設計手冊 徐灝 機械工業出版社； （8） 機械可靠性設計 劉惟信主編 機械工業出版社； （9） 機械設計手冊 機械工業出版社； （10） 機床夾具設計 龔定安等 西安交通大學出版社 （11） 機床夾具設計 李慶壽 機械工業出版社 （12）單獨驅動的回轉分度工作臺 組合機床（1985）7 總137期P19 （13） 機床設計圖冊 華東五高校編 華東科技大學出版社 （14） 機電一體化系統設計手冊 楊黎明 主編 國防工業出版社； 教研室負責人 指導教師 王安民（教授） 接受設計論文任務開始執行日期 2008 年 1 月 7 日學生簽名 畢業設計（論文）開題報告題目車床撥叉上螺紋底孔加工鉆床夾具的設計The Design of the Drilling Machine Fixture for Processing Lathe Shifting Fort Upper Thread Bottom Hole 學院茂名學院年級2004級專業機械設計制造及自動化學號04024020240姓名周宏霄指導教師王安民（教授）2008年3 月 25 日畢業設計（論文）開題報告題目車床撥叉上螺紋底孔加工鉆床夾具的設計時間2008 年3月17日至 2008年 6月10日本課題的目的意義（含國內外的研究現狀分析）機床夾具是機械制造工藝系統重要的組成部分，其質量的高低直接影響到零件制造的質量、工人的勞動強度、產品成本和生產率。通過機床夾具的設計著重培養同學們的設計、計算、分析問題和解決問題的能力，綜合運用計算機繪圖能力、表達技術問題的能力以及開拓創新的能力等。通過本夾緊機構的設計進而掌握一般機床夾具的一般方法、步驟和技巧，從而達到掌握一般機械的設計方法和技巧，使同學們綜合運用所學的知識解決工程實際問題。機床夾具是用以裝夾工件和引導刀具的附加裝置。主要用于金屬切削加工，在機床與工件、刀具之間起橋梁作用，是工藝系統中的一個重要環節。它可準確地確定工件與刀具、機床的相對位置，確保加工質量；它可以提高生產效率，確保勞動強度；它可以擴大或改變機床的使用范圍等。因此，機床夾具是保證機械加工工藝過程正常進行的技術硬件之一。綜上所訴，需要對零件進行加工工藝設計和機床夾具設計。設計(論文)的基本條件及設計(論文)依據已知條件：車床撥叉零件圖和鉆削工序圖各1張，中批生產。設計工藝過程的主要依據 (1) 根據加工對象的尺寸公差、形狀和位置公差、表面粗糙度、技術要求、工件材料、毛坯類型、熱處理與表面保護等要求來設計工藝過程。 (2) 根據給定的生產量大小來確定工藝過程。 (3) 根據本單位的先有生產條件，注意充分發揮現場技術條件手段和技術力量的潛力來設計工藝過程。本課題的主要內容、重點解決的問題主要內容及要求: (1)查閱設計資料和進行參觀補習； (2)夾具的方案設計；(3)夾具總裝配圖設計； (4)夾具主要零件圖的繪制； (5)夾具可行性分析； (6)編寫設計計算說明書；(7)外文翻譯（不少于5000字符）；(8)準備和參加答辯。重點解決問題:在保證零件加工質量前提下,提高生產效率,降低消耗,以取得較好的經濟效益和社會效益.本課題欲達到的目的或預期研究的結果其主要目的：1）、培養學生綜合分析和解決本專業的一般工程技術問題的獨立工作能力，拓寬和深化學生的知識；2）、培養學生樹立正確的設計思想，設計構思和創新思維，掌握工程設計的一般程序規范和方法；3）培養學生樹立正確的設計思想和使用技術資料、國家標準等手冊、圖冊工具書進行設計計算，數據處理，編寫技術文件等方面的工作能力；4）培養學生進行調查研究，面向?qū)嶋H，面向生產，向工人和技術人員學習的基本工作態度，工作作風和工作方法。計 劃 進 度時 間工 作 內 容備 注2008.3.172008.3.302007.4.312007.4.202007.4.212007.5.42007.552007.5.182007.5192007.6.8設計題目資料收集、寫開題報告工藝過程規劃工序設計與夾具方案的確定夾具設計與繪制裝配圖及零件圖畢業論文的撰寫整理及排版打印指導教師意見指導教師簽名： 年 月 日I 摘 要 本課題是車床撥叉上螺紋底孔加工鉆床夾具設計，而車床撥叉它位于車床變速機 構中，主要起換檔，使主軸回轉運動按照工作者的要求工作，獲得所需的速度和扭矩 的作用。 本設計中，根據撥叉尺寸公差、形狀和位置公差、表面粗糙度、技術要求、工件 材料、毛坯類型、熱處理與表面保護等要求來設計。夾具的總體設計包括從方案制定 到總裝配圖的設計的全部過程。包括確定工件的定位，選擇或設計定位元件，計算定 位誤差；確定刀具的導引和對刀方式，選取或色痕跡導引元件或?qū)Φ对?；確定工件 的夾緊方式，選擇或設計夾緊機構或裝置，計算夾緊力；確定夾具體及其他裝置的結 構類型等。 通過合理的設計，在保證零件加工質量前提下,提高生產效率,降低消耗,以取得較 好的經濟效益和社會效益。 關鍵詞：夾具，設計，鉆床，螺紋底孔； II Abstract The topic is The design of the drilling machine fixture for Processing lathe shifting fort upper thread bottom hole, and lathe shifting fort located in the lathe speed institutions, mainly from the shift so that the spindle rotary movement of workers in accordance with the requirements of work, have the necessary speed and torque Role. The design, based on tolerance shifting fort size, shape and location of tolerance, surface roughness, technical requirements, the workpiece material, rough type, heat treatment and surface protection and other requirements of the design. Fixture for the overall design, including programming from the assembly to the design of the entire process. Including the identification of the workpiece location, location choice or design components, calculated positioning error; determine the tool and guided the knife, or select the color traces of knife- guided components or components; determine the workpiece clamping, choice or design clamping Or device, calculated clamping force; identify specific folders and other devices, such as the type of structure. Through rational design, to ensure the quality of parts processing premise, increase production efficiency and reduce consumption, to achieve better economic and social benefits. Keywords: Fixture, Design,Drilling Machine,Thread Bottom Hole； 科技譯文 3 目錄 摘 要 I ABSTRACT .II 第一章 緒論 1 1.1 背景 .1 1.2 夾具的特點 .1 1.3 研究夾具的目的和意義 .4 1.4 論文構成及研究?jī)?nèi)容 .4 1.4.1 論文構成 4 1.4.2 本設計的主要內容及要求 5 第二章 機床夾具概述 6 2.1 夾具的現狀及生產對其提出新的要求 .6 2.2 夾具的國內外現狀和發展趨勢 .6 2.3 現代夾具的發展發向 .7 2.3.1 精密化 7 2.3.2 高效化 7 2.3.3 柔性化 7 2.3.4 標準化 7 2.4 機床夾具及其功用 .8 2.4.1 機床夾具 8 2.4.2 機床夾具的功能 8 2.5 機床夾具在機械加工中的作用 .8 2.6 機床夾具組成和分類 .9 2.6.1 機床夾具的基本組成部分 9 2.6.2 機床夾具的其他組成部分 9 2.7 機床夾具的分類 10 2.7.1 按夾具的通用特性分類 .10 2.7.2 按夾具使用的機床分類 .11 2.8 機床夾具設計特點 11 第三章 夾具設計 .12 3.1 夾具設計概述 .12 4 3.1.1 機床夾具設計的基本要求和步驟 .12 3.1.2 機床夾具的分類和組成 .13 3.1.3 工件安裝與獲得加工精度的方法 .13 3.1.4 工件在夾具中的定位原理 .14 3.1.5 常見定位方式及定位元件 .14 3.1.6 工件在夾具中的夾緊原理 .15 3.1.7 確定刀具位置及鉆套的選擇 .16 3.1.8 夾具總圖的繪制及標注 .18 3.1.9 機床夾具總圖上尺寸的標注 .19 3.1.10 機床夾具總圖上技術條件的標注 19 3.1.11 機床夾具調刀尺寸的標注 20 3.2 夾具設計 .21 3.2.1 問題的提出 .21 3.2.2 定位方案 設計 .22 3.2.3 定位元件設計 .23 3.2.4 切削力與夾緊力計算 .23 3.2.5 定位誤差計算 .23 3.2.6 導向方案選擇 .24 3.2.7 導向元件設計 .24 3.2.8 導向誤差計算 .24 3.2.9 夾緊裝置的設計 .24 3.2.10 設計夾具體 25 3.2.11 夾具工作原理 25 3.3 夾具在安裝和操作時應注意的事項 .25 3.3.1 夾具的安裝 .25 3.3.2 夾具在操作時應注意的事項 .26 3.4 夾具可行性分析 .26 3.4.1 夾具的經濟效益分析 .26 3.4.2 夾具的可行性 .27 第四章 總結 .28 致謝 .29 參考文獻 .30 科技譯文 .31 科技譯文 I 科技譯文 科技譯文 AUTOMATIC FIXTURE SYNTHESIS IN 3D Kamen Penev Programmable Automation Laboratory Computer Science Department and Institute for Robotics and Intelligent Systems University of Southern California Los Angeles, CA 90089-0781Aristides A. G. Requicha Programmable Automation Laboratory Computer Science Department and Institute for Robotics and Intelligent Systems University of Southern California Los Angeles, CA 90089-0781 ABSTRACT A fixture is an arrangement of fixturing modules that locate and hold a workpart during a manufacturing operation. In this work we. consider fixtures with frictionless point contacts and present a method for placement of contact points on a non-prismatic 3D workpart. It is a non-deterministic, potential field algorithm for contact point placement. The method provides a basic framework for the integration of heterogeneous high-level fixturing agents through an interface based on zones of attraction and repulsion on the workpart boundary. The algorithm may produce redundant fixtures, and can augment partial solutions to complete form closure fixtures. 1. INTRODUCTION A fixture is an arrangement of fixturing modules that locate and hold a workpart during a manufacturing operation, such as machining, assembly and inspection. Fixturing is of essential importance to industrial manufacturing and constitutes a significant part of all manufacturing costs. Therefore, fixture design automation is very important. Fixture design involves a great variety of considerations, such as restraint, deterministic location, loadability, and tool accessibility. Efficient algorithms that address the whole range of fixturing issues for a comprehensive domain of workparts do not yet exist. Recently, Brost and Peters published an algorithm Brost & Peters 1996 that extends the earlier classic work of Brost and Goldberg Brost & Goldberg, 1994 to the 3D domain. This algorithm, however, requires vertical and horizontal planar surfaces to constitute a substantial part of the workpart boundary. It generates all possible fixtures and then rates them accordingly to certain metrics. This is computationally expensive. Wagner et al presented an algorithm that uses seven modular struts mounted in a box to fixture polyhedra Wagner et al 1995. This algorithm is not complete in the sense that it cannot effectively handle certain cases, such as a cube with faces parallel to the box. It also suffers from high computational complexity. Wallack and Canny suggested another method with an “enumerate-and-rate” flavor Wallack & Canny 1996. It can fixture prismatic workparts with planar and cylindrical vertical surfaces. Ponce proposed an algorithm that utilizes curvature effects to compute fixtures with four fingers for polyhedral parts Ponce 96. The reduced number of contacts should provide for better complexity of this algorithm, but the quality of the produced fixtures seems to be inferior to the ones that utilize more contacts and provide classical form closure. In this paper we present a new potential-field algorithm that efficiently produces quality fixture designs. Our algorithm works for arbitrary workparts and provides convenient universal means for representing various fixturing requirements. This algorithm is a direct generalization of the 2D potential field fixturing algorithm of Penev and Requicha Penev & Requicha 1996. We consider fixtures with frictionless point contacts. It has been proven that seven contacts are necessary1. Somoff, 1900 and sufficient Markenscoff et al, 1990 to immobilize any workpart2 in 3D Following a least-commitment strategy, the process of fixture synthesis may be separated into three stages fixturing task analysis, contact point placement, and fixture layout design. In the fixturing task analysis phase the workpart geometry and manufacturing process are analyzed to identify various parameters of the fixturing problem, such as cutting forces, inaccessible or forbidden areas, and also to find features that may be useful for applying fixturing devices, such as machined flat surfaces, horizontal and vertical surfaces, pairs of parallel surfaces, pairs of perpendicular surfaces, etc. Figure 1: Contact point placement In the contact point placement phase a number of contact points are placed on the workpart boundary (Figure 1), so that the resulting configuration of contacts satisfies the constraints identified in the analysis phase as well as certain kinematic requirements that must be satisfied by any fixture, such as total restraint. ba Figure 2: From contact point configuration to fixture layout design In the layout design phase “towers” of fixturing components are built and placed around the workpart 科技譯文 so as to contact the part at the point locations computed in the contact point placement phase. For example, a contact point on a horizontal workpart surface (Figure 2a) may lead to the instantiation of an overhead clamp that contacts the workpart at that particular point (Figure 2b). This is a design- for-function problem constrained by the set of available fixturing modules and their parameters. The set of contact points are the functional specification and the fixture layout is a configuration of components that achieves it. In this research we focus on contact point placement and its integration with part and task analysis. An arrangement of contact points must satisfy certain kinematic conditions in order to be a basis for a good fixture. In particular, it must provide form closure, deterministic location, clamping stability, detachability and loadability Asada & By. The algorithm uses a discretization of the workpart boundary, similar to the meshes used in FEA. However, unlike FEA, our attention is on the mesh nodes, rather than on the mesh elements. Discretization was chosen for the following reasons: First, we can handle workparts with arbitrary geometry, as long as the parts boundary is a collection of smooth surfaces which we know how to mesh. This requirement is satisfied by all surfaces used in modern CAD systems. Second, discretization is necessary in order to avoid an expensive computation of geodesic curves. Third, discretization should not significantly affect the results, as long as the number of discrete candidate locations on the boundary is much larger than the number of surfaces. In our implementation the discretized boundary consists of several hundred points only. Experimental evidence indicates that this is sufficient for realistic workparts. We introduce a potential field on the workpart boundary defined by zones of attraction and repulsion, which we call P-zones. The contacts are modeled as charged particles that move on the boundary driven by this potential field. The contacts are also subject to mutual repulsion based on the distance between each two contacts in the wrench vector space. The algorithm executes a series of simulation epochs. Each epoch starts with a random configuration, proceeds through a certain number of steps toward lower potential energy and ends with a test for kinematic conditions (form closure). The algorithm terminates when an epoch produces satisfactory configuration. To spread the contact points on the boundary we simulate repulsion between each pair of them. The intensity of repulsion between two contact points depends on the distance between their corresponding wrenches in the wrench vector space. Our simulation proceeds in a limited number of steps or until equilibrium is reached. The resulting placement should have a good chance of leading to a good fixture. Such a randomized method assumes that the set of n-tuples of contact points (for n greater than three) that satisfy the kinematic requirements has measure greater than zero and is relatively large. That is, the solution space is large. Although we have not been able to prove this hypothesis mathematically, our experiments have confirmed it. Moreover, the measure increases with the number of contact points, e.g. it is easier to find a form closure arrangement with eight points than with seven. The notion of repulsion is essential in our method as it allows other considerations to be accommodated easily. We can put additional repulsion spots on the workpart boundary to represent forbidden regions. We can also introduce centers of attraction. These correspond to areas that were recommended by the analysis phase as desirable for placing contact points, e.g. datum surfaces. Thus, we propose a potential field for uniformly representing heterogeneous fixturing information. Regions of repulsion correspond to areas with positive potential. Negative potential is associated with attraction. Zero potential corresponds to neutral areas. The initial randomly selected contact points are regarded as particles that are being attracted or repelled by a potential field that includes a pairwise repulsion. The goal of the system of contact points is to minimize its total potential energy. 2 THE INPUT The input to our algorithm consists of CAD models of the workpart boundary and a set of solid P-zones. Each P-zone defines a potential-field influencing region with non-zero charge. 3 DISCRETIZING THE WORKPART BOUNDARY The first step in our method is to discretize the boundary of the workpart, thus creating the candidate contact point locations which we call nodes. Discretization is done by invoking a standard faceter embedded in the geometric modeler we use. The discretization is stored in an oriented graph data structure. Each node of the graph corresponds to a node on the mesh. The edges of the graph correspond to edges of the mesh connecting neighboring nodes. At each node the screw representing the point contact is computed and stored. A screw is a concise and convenient representation of the surface normal and the location of the node. It is used in all kinematic tests based on screw theory. 4 COMPUTING THE POTENTIAL FIELD The contact points in our algorithm are subject to the combined action of two components forming the potential field. The background potential field is one of these components. It is generated by the P-zones and does not depend on the location of the contact points. The background potential field is computed only once, in the beginning of the algorithm. The other component is dynamic and is due to the repulsion between the contacts. The dynamic component is computed at each epoch. The computation of the background potential field proceeds as follows: First, we find all nodes that lie inside P-zones. We perform membership classification of each node against each P-zone Tilove 1980. If the node is inside a certain P-zone, the charge of the P-zone contributes to the nodes charge. The contribution may be positive or negative, depending on the sign of the zones charge. After this procedure the nodes that classify outside all P-zones remain with zero charge. If a node m classifies inside P-zones z1, z2. zk its charge Cm equals the sum of the charges of those P-zones: ziki1 After the charge of the nodes inside P-zones is evaluated we proceed by computing the potential of all nodes. We define the potential at a charged node to be initially equal to its charge Pm=Cm. For each charged node m with charge Cm we perform a breadth-first traversal of its neighbors updating their potential according to the formula： Pdnnm1210, Here d(m,n) is the distance between nodes m (the charged node) and n, and d0 is a constant called distance of influence. The distance between two nodes is defined as the number of edges on the 科技譯文 shortest path between them on the mesh boundary approximation (Figure 3). n m d(m,n)=7 Figure 3: Distance between two nodes on the mesh Assuming the mesh satisfies certain common quality requirements, this distance approximates quite well the actual geodesic distance between two points on the objects boundary. The breadth-first traversal goes only d0 nodes deep. Thus a charged node causes updates of the potential only in its d0- neighborhood. For example, if the three dark nodes in Figure 4 have charge 100 and d0=3 the potential in this part of the mesh will be as shown by the numbers next to each node. 0 0 0 0 0 0 0 0 0 8 8 16 16 16 16 16 8 8 8 8 8 16 8 8 74 74 74 49 49 49 49 16 16 16 49 49 Figure 4: Potential field generated by three charged nodes The dynamic potential represents repulsion between the contact points. The repulsion between two contacts depends on how distant their corresponding screws are as 6-dimensional vectors:Pmnn(,)(,)1142 Here is a small number to avoid division by zero, is a scaling factor that makes the dynamic potential compatible with the background component, and (m,n) is the Euclidean distance between the screws at nodes m and n. The rationale behind repulsion based on screw-distance is the following: A necessary and sufficient condition for form closure is that the set of contact screws positively spans the entire R6 Wagner et al. 1995. As the contact screws repel each other, they will tend to distribute regularly in the space, thus increasing the possibility of form closure. 5 EPOCHS Each epoch starts with a random initial placement of contact points. Then these contact points are subjected to the combined forces due to the background potential field and the repulsion between the contact points themselves. The algorithm proceeds in an iterative fashion. First, the dynamic component of the aggregated potential field is computed accordingly to (3). The dynamic potential is computed only at the contacts and their immediate neighbors. After the combined potential is computed, each contact is moved to the neighbor node with the lowest potential. Thus a step is completed. If the number of steps has reached a certain limit, or no contact was moved (i.e. equilibrium has been reached), the epoch is completed. Throughout this process special attention is paid to nodes that lie on edges and vertices of the workpart. These nodes do not have a screw associated with them as there is no normal defined there. Therefore, they cannot be a possible contact location. Instead, they serve merely as transit nodes in the simulation. This is achieved by always considering the neighbors of such a node whenever the node itself is addressed. The net result of an epoch is that the initially random configuration transforms into one that has more regular distribution of contact screws in the screw vector space, while at the same time keeping away from repulsion zones and providing contacts inside attraction zones. 6 TEST In the test phase we check whether the placement of contact points provides form closure. This is done using the method of Chou et al. Chou et al. 19? It tests whether there exists a non-zero motion screw that complies with the constraints imposed by the contact wrenches:swiCi01 The existence of s is tested using linear programming techniques. If no such motion exists the arrangement of contacts provides form closure. If the test succeeds the algorithm terminates. Otherwise a new epoch is initiated. If the test fails and a certain number of generations have been tried we increase the number of contact points C. Increasing C improves the probability of ending up with a form closure configuration as well as having more contacts in P-zones of attraction. The algorithm ensures that no two contact points are placed on the same mesh node. Therefore, in the extreme case there are three contacts on each face. Such a placement obviously immobilizes any polyhedral part. Hence the completeness of the algorithm (at least for polyhedral parts). After a redundant form-closure configuration is computed, the algorithm can remove the extra contacts in the order of decreasing background potential, i.e. starting with the ones in P-zones of highest repulsion. Redundant fixtures are sometimes preferred, as they minimize part deflection and vibration. The system can operate with or without redundancy reduction. The decision might be guided by the analysis phase based on the geometric shape of the part and the magnitude of the external forces, or a human operator may allow redundancy manually and even force it by setting the initial number of contacts to be more than the theoretical minimum (7 in 3D). 科技譯文 It is possible for the kinematic test to succeed, but the potential at some contacts to be high. This can happen if a contact is trapped in a local minimum of the potential field where the potential is high. To handle such situations we introduce a threshold parameter called maximum allowable potential. Arrangements with potential at any contact higher than the threshold are discarded. This new test may lead to situations in which the algorithm does not terminate because no fixture exists with sufficiently small potential. (Imagine the extreme example that the entire workpart boundary is a forbidden region.) Therefore, we limit the number of epochs to ensure termination. In the case of such termination the algorithm outputs the solution with the lowest maximum potential. 7. DISCUSSION The proposed algorithm solves the essential problem in fixture design placing contact points on the workpart that provide form closure. It can be incorporated in a complete fixture design system that provides modules for fixturing task analysis and layout design. The algorithm provides a simple, but powerful interface to the fixturing task analysis modules based on zones of attraction and repulsion. Admittedly, not every contact configuration can be implemented by a certain fixturing toolkit in the layout design phase. It may be necessary to invoke the contact placement algorithm several times until a feasible configuration is produced. 7.1 Fixturing Task Analysis Various fixturing heuristics and requirements can be expressed in terms of zones of higher attraction or repulsion. For example, attraction zones may be used to represent: datum surfaces machined surfaces surfaces with “good” orientation areas with good accessibility areas that need additional support to prevent deflection and deformation Repulsion zones can represent: inaccessible areas forbidden areas due to tool accessibility requirements surfaces with poor orientation cast surfaces sensitive surfaces that are vulnerable to scratching etc. An important open problem is how to assign numerical values to the P-zone potential. One possibility is to classify the constraints into a small number of categories, e.g. “strong repulsion”, “repulsion”, “neutral”, “attraction”, “strong attraction”. All constraints within the same category are assigned the same potential. While such a scheme does not reflect subtle differences in priorities of the fixturing constraints, it will probably capture the most important ones. 7.2 Fixture Completion An important property of the algorithm is that it allows partial fixtures to be input. Partial fixtures may be produced by other fixturing agents, humans or computer programs, who place certain fixels they know are necessary and hand the work over to our algorithm for completion. The algorithm then places additional contacts so that form closure is achieved. We represent the partial fixture as fixed contacts which participate in the mutual repulsion with the free contacts, but are not allowed to move. In this light, the algorithm may be viewed as a fixture completion engine 7.3 Non-determinism and Redundancy. Due to the randomness of the initial placement in each generation, the algorithm is non- deterministic, i.e. it can produce different solutions given the same input. This is desirable as a contact point configuration may be rejected by the layout design module and the algorithm will have to produce another solution. The algorithm may produce redundant fixtures in certain cases. Redundant fixtures have drawbacks as well as advantages over the minimal ones. Certainly, they impair loadability and waste components. However, they m