雙面鉆孔組合機床控制系統設計

購買設計請充值后下載，資源目錄下的文件所見即所得，都可以點開預覽，資料完整，充值下載可得到資源目錄里的所有文件。【注】：dwg后綴為CAD圖紙，doc,docx為WORD文檔，原稿無水印，可編輯。具體請見文件預覽，有不明白之處，可咨詢QQ:12401814 第二部分 MCGS新加內容2.1 MCGS的介紹MCGS(Monitor and Control Generated System，監視與控制通用系統)是北京昆侖通態自動化軟件科技有限公司研發的一套基于Windows平臺的，用于快速構造和生成上位機監控系統的組態軟件系統，主要完成現場數據的采集與監測、前端數據的處理與控制，可運行于Microsoft Windows 95/98/Me/NT/2000/xp等操作系統。MCGS組態軟件包括三個版本，分別是網絡版、通用版、嵌入版。具有功能完善、操作簡便、可視性好、可維護性強的突出特點。通過與其他相關的硬件設備結合，可以快速、方便的開發各種用于現場采集、數據處理和控制的設備。用戶只需要通過簡單的模塊化組態就可構造自己的應用系統，如可以靈活組態各種智能儀表、數據采集模塊，無人值守的現場采集站、人機界面等專用設備。2.2 MCGS的主要特性和功能（1）簡單靈活的可視化操作界面；（2）實時性強、良好的并行處理性能；（3）豐富、生動的多媒體畫面；（4）開放式結構，廣泛數據獲取和強大的數據處理功能。MCGS系統由五大功能模塊組成，主要的功能模塊以構建的形式來構造，不同的構件有著不同的功能，且各自獨立。三種基本類型的構件（設備構件、動畫構件、策略構件）完成了MCGS系統三大部分（設備驅動、動畫顯示和流程控制）的所有工件。初次以外，MCGS還提供了一套開放的課擴充接口，用戶可根據自己的需要用VB、VC等高級開發語言，編制特定的構件來擴充系統功能。MCGS用數據庫賴管理數據存儲，系統可靠性高.MCGS設立對象元件庫，組態工作簡單方便，易于實現對工控系統的分布式控制和管理。2.3 MCGS的編程語言MCGS全中文組態軟件，采用C+語言編制，核心為組態結構。構架合理、連接靈活，結構層次清晰，方便用戶的定制開發。它是基于win95/98/nt視窗結構，能夠快速構造和和生成數據管理、報警處理、流程控制、動畫顯示、報表輸出等截面，輕松實現各種工程曲線、報表、數據瀏覽、遠程通訊、遠程采集、遠程診斷等功能的先進軟件。 2.4 MCGS的數據結構 MCGS數據管理功能強大，分為數據前處理（可以對設備采集進來的數據進行多種數值處理）、實時數據處理（提供數據瀏覽，各種曲線、報表等功能構件，對存盤數據庫的數據進行查詢、排序、運算等操作），同時可以掛外界外部數據庫，實現ODBC接口和OLE實時調用，可以和SOL、Server、Oracle、Access等數據庫相連，提供多種數據轉換方式，每種方法都可以獨立使用或組合使用。數據瀏覽構件可同時以表格和曲線的形式顯示存盤數據庫中數據，實時曲線可以動態顯示當前的數據，并可以設定上下限值和時間的長短，以便于用戶查詢，同時提供DXCEL報表和MCGS自由報表。2.5 MCGS的作用 MCGS全中文組態軟件是真正的32為程序，支持多任務、多線程，提供近百種繪圖工具和基本模塊、智能儀表、PLC、變頻器、網絡設備，它支持Activex控件，包括溫控曲線、實時曲線、計劃曲線、歷史曲線、XY曲線、實時報表、歷史報表、單行報表、配方管理、數據庫管理、數據庫瀏覽統計、多媒體輸出等眾多構件。 MCGS全中文組態軟件可以完整實現ODBC接口，可與SQLServer、Oracle、Access等主要數據庫相連，可實現各種復雜的報表，并以不同方式增加、刪除數據庫中的記錄，支持CAN、PROFIBUS、HART、LONWOTKS等多種數據傳輸方案，提供4級安全保密機制。工程組態軟件MCGS的最大優點是組態方便，它融會了中外工控組態軟件的眾多長處，只要是稍微具外語常識，即可以方便組態。2.6 MCGS嵌入版由MCGS嵌入版生成的用戶應用系統，其結構由主控窗口、設備窗口、用戶窗口、實時數據庫和運行策略五個部分構成。窗口是屏幕中的一塊空間，是一個“容器”，直接提供給用戶使用。在窗口內，用戶可以放置不同的構件，創建圖形對象并調整畫面的布局，組態配置不同的參數以完成不同的功能。在MCGS嵌入版中，每個應用系統只能有一個主控窗口和一個設備窗口，但可以有多個用戶窗口和多個運行策略，實時數據庫中也可以有多個數據對象。MCGS嵌入版用主控窗口、設備窗口和用戶窗口來構成一個應用系統的人機交互圖形界面，組態配置各種不同類型和功能的對象或構件，同時可以對實時數據進行可視化處理。實時數據庫是MCGS嵌入版系統的核心實時數據庫相當于一個數據處理中心，同時也起到公用數據交換區的作用。MCGS嵌入版使用自建文件系統中的實時數據庫來管理所有實時數據。從外部設備采集來的實時數據送入實時數據庫，系統其它部分操作的數據也來自于實時數據庫。實時數據庫自動完成對實時數據的報警處理和存盤處理，同時它還根據需要把有關信息以事件的方式發送給系統的其它部分，以便觸發相關事件，進行實時處理。因此，實時數據庫所存儲的單元，不單單是變量的數值，還包括變量的特征參數（屬性）及對該變量的操作方法（報警屬性、報警處理和存盤處理等）。這種將數值、屬性、方法封裝在一起的數據我們稱之為數據對象。實時數據庫采用面向?qū)ο蟮募夹g(shù)，為其它部分提供服務，提供了系統各個功能部件的數據共享。主控窗口構造了應用系統的主框架主控窗口確定了工業控制中工程作業的總體輪廓，以及運行流程、特性參數和啟動特性等項內容，是應用系統的主框架。設備窗口是MCGS嵌入版系統與外部設備聯系的媒介設備窗口專門用來放置不同類型和功能的設備構件，實現對外部設備的操作和控制。設備窗口通過設備構件把外部設備的數據采集進來，送入實時數據庫，或把實時數據庫中的數據輸出到外部設備。一個應用系統只有一個設備窗口，運行時，系統自動打開設備窗口，管理和調度所有設備構件正常工作，并在后臺獨立運行。注意，對用戶來說，設備窗口在運行時是不可見的。用戶窗口實現了數據和流程的“可視化”用戶窗口中可以放置三種不同類型的圖形對象：圖元、圖符和動畫構件。圖元和圖符對象為用戶提供了一套完善的設計制作圖形畫面和定義動畫的方法。動畫構件對應于不同的動畫功能，它們是從工程實踐經驗中總結出的常用的動畫顯示與操作模塊，用戶可以直接使用。通過在用戶窗口內放置不同的圖形對象，搭制多個用戶窗口，用戶可以構造各種復雜的圖形界面，用不同的方式實現數據和流程的“可視化”。組態工程中的用戶窗口，最多可定義512個。所有的用戶窗口均位于主控窗口內，其打開時窗口可見；關閉時窗口不可見。運行策略是對系統運行流程實現有效控制的手段運行策略本身是系統提供的一個框架，其里面放置有策略條件構件和策略構件組成的“策略行”，通過對運行策略的定義，使系統能夠按照設定的順序和條件操作實時數據庫、控制用戶窗口的打開、關閉并確定設備構件的工作狀態等，從而實現對外部設備工作過程的精確控制。一個應用系統有三個固定的運行策略：?jiǎn)?dòng)策略、循環策略和退出策略，同時允許用戶創建或定義最多512個用戶策略。啟動策略在應用系統開始運行時調用，退出策略在應用系統退出運行時調用，循環策略由系統在運行過程中定時循環調用，用戶策略供系統中的其它部件調用。綜上所述，一個應用系統由主控窗口、設備窗口、用戶窗口、實時數據庫和運行策略五個部分組成。組態工作開始時，系統只為用戶搭建了一個能夠獨立運行的空框架，提供了豐富的動畫部件與功能部件。第三章 工程的建立與變量的定義3.1 工程的建立(1)單擊文件菜單中“新建工程”選項，彈出“新建工程設置”窗口，點擊確定按鈕。(2)選擇文件菜單中的“工程另存為”菜單項，彈出文件保存窗口。(3)在文件名一欄內輸入“雙面鉆孔組合機床”，點擊“保存”按鈕，工程創建完畢。圖3-1 新建工程圖3-2 輸入工程名3.2 變量的定義在開始定義之前，我們先對系統進行分析，確定需要的變量。本系統至少需要個變量，見表1表1 雙面鉆孔組合機床監控系統變量分配表變量名類型初值注釋啟動停止按鈕開關0啟動控制信號，輸入1啟動，輸入0停止復位停止按鈕開關0復位控制信號，輸入1復位后停止；輸入0無效上移信號開關0工件上移信號，輸入1有效上移信號1開關0夾板上移信號，輸入1有效下移信號開關0工件下移信號，輸入1有效下移信號1開關0夾板下移信號，輸入1有效左移信號開關0右側快速退回信號，輸入1有效左移信號1開關0左側快進信號，輸入1有效左移信號2開關0左側工進左移信號，輸入1有效右移信號開關0右側快進信號，輸入1有效右移信號1開關0右側工進信號，輸入1有效右移信號2開關0左側快速退回信號，輸入1有效夾緊信號開關0工件夾緊信號，輸入1有效放松信號開關0工件放松信號，輸入1有效插銷信號開關0銷插銷完畢信號，輸入1有效拔銷信號開關0拔銷完畢信號，輸入1有效左可見度開關0左邊加工可見度，輸入1有效右可見度開關0右邊加工可見度，輸入1有效垂直移動量數值0工件垂直下移數值垂直移動量1數值0上板下移數值水平移動量數值0整個右滑臺右移數值水平移動量左數值0整個左滑臺左移數值3.3變量定義的步驟（1）單擊工作臺中的“實時數據庫”選項卡，進入“實時數據庫”窗口頁，如圖3-3所示。窗口中列出了系統已有變量“數據對象”的名稱。其中一部分為系統內部建立的數據步驟對象?，F(xiàn)在要將表中定義的數據對象添加進去。圖3-3 實時數據庫（2）單擊工作臺右側“新增對象”按鈕，在窗口的數據對象列表中增添了一個新的數據對象，如圖3-4所示。圖3-4 新添數據對象（3）選中該數據對象，按“對象屬性|按鈕，或雙擊選中對象，這則打開“數據對象屬性設置”窗口。a將“對象名稱”改為：?jiǎn)?dòng)停止按鈕；“對象初值”改為：0；“對象類型”選擇：開關型；在“對象內容注釋輸入框|內輸入：?jiǎn)?dòng)停止信號，輸入1啟動；輸入0停止 b單擊“確定”。 如圖3-5所示。(4)按照步驟3-5，根據上面列表，設置其他數據對象。(5)單擊“保存”按鈕。 圖3-5 數據對象屬性設置第四章 工程畫面的建立（1）在“用戶窗口”中單擊“新建窗口”按鈕，建立“窗口0”。如圖4-1所示。 如圖4-1 新建用戶窗口（2）選中“窗口0”，單擊“窗口屬性”，進入“用戶窗口屬性設置”。（3）將窗口名稱改為：雙面鉆孔組合機床：窗口標題改為：雙面鉆孔組合機床；其他不變。4.1雙面鉆孔組合機床監控畫面的制作（1）單擊“用戶窗口”。（2）雙擊“用戶窗口”中的“雙面鉆孔組合機床”。進入編輯畫面。如圖4-2所示。 圖4-2 編輯環境（2）單擊“工具箱”內的“標簽”按鈕，打開繪圖工具箱。（3）選擇“工具箱”內的“標簽”按鈕，鼠標的光標呈“十字”形，在窗口頂端中心位置拖曳鼠標，根據需要拉出一個一定大小的矩形。（4）在光標閃爍位置輸入文字“雙面鉆孔組合機床監控系統”，按回車鍵在窗口的任意位置用鼠標點擊一下，文字輸入完畢。（5）選中文字框，作如下設置。（6）點擊“填充色”按鈕，設定文字框的背景顏色為：沒有填充。（7） 點擊“線色”按鈕，設置文字框的邊線顏色為：沒有邊線。（8）點擊“字符字體”按鈕，設置文字字體為：宋體；字型為：粗體；大?。憾?hào)（9）點擊“字符顏色”按鈕，將文字顏色設為：“黃色”。單擊“保存”，“ 雙面鉆孔組合機床”文字編輯完畢。（10）選中“雙面鉆孔組合機床監控系統”的窗口標題，單擊“動畫組態”，進入動畫組態窗口對“雙面鉆孔組合機床監控系統”進行相同的操作。單擊繪圖工具箱中的插入“元件”圖標，彈出“對象元件管理”對話框，將相應的動畫元件添加到組態中?！皩?duì)象元件管理”如圖4-5所示：圖4-3 對象元件庫最終的監控畫面如圖圖4-4所示：圖4-4 雙面鉆孔組合機床監控系統4.2 運行策略的建立及定時器的編寫1 運行策略的建立進入“運行策略”窗口中，雙擊進入“循環策略”窗口，如圖4-5所示。圖4-5 循環策略左鍵點擊工具條，選中“新增策略行”，增加一策略行。單擊“策略工具箱”中的“腳本程序”將鼠標指針移到策略塊圖標上，單擊鼠標左鍵，添加腳本程序構件。如圖4-6所示。圖4-6 添加腳本程序2.定時器的添加 選中“新增策略行”，增加一策略行。單擊“策略工具箱”中的“定時器”將鼠標指針移到策略塊圖標上，單擊鼠標左鍵，添加腳本程序構件。如圖4-7所示。 圖4-7 添加定時器定時器的設置如圖4-8所示：4-8 定時器設置4.3雙面鉆孔組合機床控制系統腳本程序的編寫雙擊“腳本程序”工具條進入腳本程序編輯環境，編輯腳本程序如下：IF 下移信號2 = 1 THEN 垂直移動量 = 垂直移動量 + 1 ENDIF 工件下移速率為1 IF 上移信號2 = 1 THEN 垂直移動量 = 垂直移動量 - 1ENDIF 工件上移速率為1IF 下移信號1 = 1 THEN 垂直移動量1 = 垂直移動量1 + 1ENDIF 上板下移速率為1IF 上移信號1 = 1 THEN 垂直移動量1 = 垂直移動量1 - 1ENDIF 上板下移速率為1IF 下移信號 = 1 THEN 垂直移動量2 = 垂直移動量2 + 1ENDIF 上板上移速率為1IF 上移信號 = 1 THEN 垂直移動量2 = 垂直移動量2 - 1 ENDIF 上板下移速率為1IF 右移信號11 = 1 THEN 水平移動量 = 水平移動量 + 1ENDIF 右移速率為1IF 左移信號11 = 1 THEN 水平移動量 = 水平移動量 - 1ENDIF 右移速率為-1IF 左移信號22 = 1 THEN 水平移動量左 = 水平移動量左 - 1ENDIF 左移速率為1IF 右移信號22 = 1 THEN 水平移動量左 = 水平移動量左 + 1ENDIF 左移速率為-1 IF 啟動停止按鈕 = 1 AND 復位停止按鈕 = 0 THEN 定時器復位 = 0定時器啟動 = 1 ENDIF 單擊啟動停止按鈕，定時器開始計時IF 啟動停止按鈕 = 0 THEN 定時器啟動 = 0ENDIF 再單擊啟動停止按鈕，定時器停止計時IF 復位停止按鈕 = 1 AND 計時時間 = 70 THEN 定時器啟動 = 0ENDIF 單擊復位停止按鈕，定時器計時時間大于等于70s，定時器停止計時IF 定時器啟動 = 1 THEN IF 計時時間 5 THEN 下移信號2 = 1EXIT ENDIF 計時器啟動，工件下移IF 計時時間 10 THEN 下移信號2 = 0下移信號1 = 1EXIT 工件停止下移，夾板下移 ENDIF IF 計時時間 15 THEN 下移信號1 = 0下移信號 = 1EXITENDIF 夾板停止下移；開始插銷 IF 計時時間 20 THEN 下移信號 = 0右主軸啟動信號 = 1右移信號 = 1工件夾緊標志 = 1右移信號11 = 1EXITENDIF 插銷完畢；右主軸啟動；右滑臺快進 IF 計時時間 25 THEN 右移信號 = 0右移信號1 = 1EXITENDIF 右滑臺工進 IF 計時時間 35 THEN 右移信號1 = 0右主軸啟動信號 = 0右主軸停止信號 = 1左移信號 = 1右移信號11 = 0左移信號11 = 1EXITENDIF 右滑臺工進結束；右主軸停轉；右滑臺快速后退 IF 計時時間 40 THEN 左移信號11 = 0左移信號 = 0左主軸啟動信號 = 1左移信號1 = 1左移信號22 = 1右可見度 = 1左可見度 = 1EXITENDIF 右滑臺退回原位；左主軸啟動；左滑臺快進 IF 計時時間 45 THEN 左移信號1 = 0左移信號2 = 1EXITENDIF 左滑臺工進 IF 計時時間 55 THEN 左移信號2 = 0左主軸啟動信號 = 0左主軸停止信號 = 1右移信號2 = 1工件夾緊標志 = 0左移信號22 = 0右移信號22 = 1 EXITENDIF 左滑臺工進結束；左主軸停轉；左滑臺快速退回原位 IF 計時時間 60 THEN 右移信號2 = 0上移信號 = 1右移信號22 = 0右可見度 = 0左可見度 = 0EXITENDIF 左滑臺回到原位；拔銷 IF 計時時間 65 THEN 上移信號 = 0上移信號1 = 1 EXIT ENDIF 拔銷完畢；松開工件 IF 計時時間 = 70 THEN 上移信號2 = 0右主軸停止信號 = 0左主軸停止信號 = 0 定時器復位 = 1 EXITENDIF 左滑臺后退到原位；左右主軸停止信號結束；準備開始重新計時ENDIFIF 定時器啟動 = 0 THEN 上移信號 = 0上移信號1 = 0上移信號2 = 0下移信號 = 0下移信號1 = 0下移信號2 = 0左移信號 = 0左移信號1 = 0左移信號2 = 0右移信號 = 0 右移信號1 = 0 右主軸啟動信號 = 0左主軸啟動信號 = 0左主軸停止信號 = 0右主軸停止信號 = 0右移信號11 = 0左移信號11 = 0右移信號22 = 0左移信號22 = 0ENDIF 定時器停止工作，上述信號變回初始狀態19附錄：外文資料與中文翻譯外文資料：The Development Of Machine Tool Technologyand automatic line Machine Tool and Machine Tool Automatic Line is a dedicated and efficient automation technology and equipment, at present, it is still a high-volume machinery to achieve efficient, high quality and economical production of key equipment, which is widely used in automobiles, tractors, diesel and compressed machines and many other industrial production. In particular, the automotive industry, is a combination of machine tools and automatic lines largest user. Such as the German Volkswagen plant in Salzgitter engine plant, used in the early 90s metal-cutting machine tool is automatic line (60%), machines (20%) and processing center (20%). Clearly, the mass production of the machinery industry, a lot of used equipment is a combination of machine and automatic line. Therefore, combination machine tool and its automatic line level of technical performance and integrated automation, the large extent determines these industries, a product of the production efficiency, product quality and business organization of production Jiegou, Yezai determine a companys products competitiveness. 現代組合機床和自動線作為機電一體化產品，它是控制、驅動、測量、監控、刀具和機械組件等技術的綜合反映。 Combination of machine tools and automatic lines of modern mechatronic product as it is to control, drive, measure, monitor, tool and machinery components such as a comprehensive reflection of technology. 近20年來，這些技術有長足進步，同時作為組合機床主要用戶的汽車和內燃機等行業也有很大的變化，其產品市場壽命不斷縮短，品種日益增多且質量不斷提高。 The past 20 years, these technologies have made considerable progress, as well as a combination of machine tool user industries such as automobile and internal combustion engines, there are big changes in the market life of their products continue to shorten, increasing variety and quality improved. 這些因素有力地推動和激勵了組合機床和自動線技術的不斷發展。 These factors effectively promote and encourage the combination of machine and automatic line technology continues to evolve. 1 A combination of varieties of key development tools 在組合機床這類專用機床中，回轉式多工位組合機床(圖2)和自動線占有很重要的地位。 In the combination of these special purpose machine tools, the rotary multi-station machines (Figure 2) and automatic line plays an important role. 因?yàn)檫@兩類機床可以把工件的許多加工工序分配到多個加工工位上，并同時能從多個方向?qū)ぜ膸讉€(gè)面進行加工，此外，還可以通過轉位夾具(在回轉工作臺機床上)或通過轉位、翻轉裝置(在自動線上)實現工件的五面加工或全部加工，因而具有很高的自動化程度和生產效率，被汽車、摩托車和壓縮機等工業部門所采用。 Because these two types of machine parts can be assigned to many manufacturing processes on multiple processing station, and also from several different directions on the workpiece surface processing, In addition, you can also switch to digital clamp (work in rotation machine tool) or by translocation, flip device (in the automatic line) to achieve a five-face machining parts or all of processing, so they have a high degree of automation and production efficiency, a car, motorcycle and compressors and other industrial sectors used. 根據有關統計資料，德國在19901992年期間，回轉式多工位組合機床和自動線的產量約各占組合機床總數的50%左右。According to statistics, Germany in 1990 and 1992, combined multistation rotary machine and automatic production lines around each combination of machine tool about 50% of the total. 應指出，回轉式多工位組合機床實際上是一種特殊型式的小型自動線，適合于加工輪廓尺寸250mm的中小件。 Be noted that multi-station rotary machine is actually a combination of special types of small automatic lines for processing outline size of 250mm of small pieces. Compared with the automatic line, in the processing of the same parts of the case, the combination of multi-station rotary machine tool operations share is about a small area than the automated line 2 / 3.2、 beat time to further reduce the automatic line 目前，以大批量生產為特征的轎車和輕型載貨車，其發動機的年產量通常為60萬臺左右，實現這樣大的批量生產，回轉式多工位組合機床和自動線在三班運行的情況下，其節拍時間一般為2030秒，當零件生產批量更大時，機床的節拍時間還要更短些(表1)。 At present, characterized by mass production of cars and light trucks, the engines output is usually around 60 million units, to achieve such a large volume production, multi-position rotary combination of machine tools and automatic lines in the case of three-shift operation , the tact time is generally 20 to 30 seconds, when the greater part of production volume, the machine cycle times should be shorter (Table 1). In the 70s, automatic line to achieve such a short beat, often used side by side duplex or set the two-lane approach, that is, determining the automatic line of the beat, the longest processing operation processes through the same process in parallel two station, if more restrictive process, then the same through the use of two automatic lines to balance the automatic line system processing rhythm. 顯然，這樣就要增加設備投資和作業面積。 Apparently, this would increase the investment in equipment and operating area. 縮短基本時間的主要途徑是采用新的刀具材料和新穎刀具，以通過提高切削速度和進給速度來縮短基本時間。 The main way to shorten the basic time is the introduction of new materials and novel tool tool to enhance the cutting speed and feed through to shorten the basic time rate. 例如，德國大眾汽車廠在加工鋁合金缸蓋燃燒室側面時，采用PCD銑刀，銑削速度高達3075m/min，進給速度達3600mm/min；又如，在鏜削灰鑄鐵缸體的缸孔時，采用裝有三個可轉位CBN刀片的新穎鏜刀頭，切削速度達800m/min，進給速度為1500mm/min，加工深度為146mm的缸孔，其實際加工時間僅為5.8s，比傳統加工工藝可縮短2/3的加工時間。 For example, the German Volkswagen plant in the processing of aluminum alloy cylinder head combustion chamber side, the use of PCD milling cutters, milling speeds of up to 3075m/min, feed speed 3600mm/min; another example, in boring gray cast iron cylinder block of the cylinder bore When used with three indexable boring head new CBN inserts, cutting speed up to 800m/min, feed rate 1500mm/min, processing depth of 146mm the cylinder bore, the actual processing time of only 5.8s, compared traditional processing process can be shortened 2 / 3 of the processing time. 縮短輔助時間主要是縮短包括工件輸送、加工模塊快速引進以及加工模塊由快進轉換為工進后至刀具切入工件所花的時間。 Reduce the auxiliary time is shortened, including parts delivery, processing and rapid introduction of the module and processing module is converted to work by the fast-forward to the tool after the cut into the workpiece into the time spent. To shorten this part of the air travel time, generally used to improve workpiece (workpiece direct transmission) or the accompanying fixtures and processing module transmission speed fast speed. 目前，隨行夾具的輸送速度可達60m/min或更高些，加工模塊快速移動速度達40m/min。 At present, the accompanying transmission speeds up to 60m/min fixture or later some, fast-moving speed of processing modules 40m/min. At present, the accompanying high-speed conveyor fixture common control with electro-hydraulic proportional valve or cyclonical driven conveyer. The late 70s, Honsberg body in its processing of automatic transmission line on the use of electro-hydraulic proportional valve controlled delivery device. Movement of the conveyor curves. As the electro-hydraulic proportional valve control system has a good start and braking performance, and the system structure is simple, so far, this conveyor being used by many automated line.3、the rapid progress of flexible combination machine 十多年來，作為組合機床重要用戶的汽車工業，為迎合人們個性化需求，汽車變型品種日益增多(圖5)，以多品種展開競爭已成為汽車市場競爭的特點之一，這使組合機床制造業面臨著變型多品種生產的挑戰。 10 years, as the combination of machine tools important to the users automobile industry, to meet the individual needs of people, cars become growing varieties (Figure 5), a multi-species competition has become one of the characteristics of market competition car, making Machine Tool Manufacturing industry faces many varieties of variant production challenges. 為適應多品種生產，傳統以加工單一品種的剛性組合機床和自動線必須提高其柔性。 To meet the multi-species production and processing of a single species of conventional machine tools and automatic lines rigid composite to improve its flexibility. In the 70s, numerical control system reliability has been greatly improved, it is to late 70s and early 80s, as Alfing, Hller-Hille and Ex-cell-o and other companies have developed a flexible machining modules, and automatic line ( FTL), from CNC machine tools and flexible combination of automatic line has increased every year. 1988 to 1992, Japan Machine Tool and automatic line (including some other form of special machine tools) production NC rate has reached 32% 39%, output NC rate of 35% to 51%; the German Machine Tool and automatic line production The NC rate of 18% and 62%, 45% of the value NC 66% (Table 2). These figures show that over the past decade, the development of NC machine tool combination is very rapid. Should be noted that since the 90s into the car even more intense market competition, product market and further reduce the life of the new models and shorter development cycle (now usually 35 months), car varieties growing, so automotive industry to flexible automation increasing demand for technical equipment. Such as Toyota Motor Corporation, in the end of this centurys goal is to subordinate the factory the company flexible manufacturing systems coverage reached 100%.很顯然，組合機床及其自動線在保持其高生產效率的條件下，進一步提高其柔性就愈來愈具有重要意義。 Obviously, combination machine tool and its production line while maintaining its high productivity conditions, further enhancing its flexibility on the more important. 組合機床的柔性化主要是通過采用數控技術來實現的。Flexible modular machine tool is mainly through the use of numerical control technology to achieve. Development of flexible modular machine tool and an important prerequisite for flexible automatic line is the development of CNC machining module, which has a long history of development of processing technology for the development of CNC machining center modules to provide a mature experience. NC modules formed by the flexible modular machine tool and flexible automatic lines, can be changed through the application and the automatic tool changer CNC program to automatically replace the multi-axle box and change the processing itinerary of the working cycle, cutting parameters and processing location, in order to adapt to change type variety of processing. 柔性組合機床和柔性自動線用的數控加工模塊，按其數控坐標(軸)數，主要有單坐標(Z)、雙坐標(XZ、YZ、ZU和ZB等)和三坐標(XYZ)加工模塊；按其主軸數，有單軸和多軸加工模塊，也有單軸和多軸復合加工模塊。Single-axis machining module by the NC slide and spindle assembly (or axle box, including for multi-axle box) form. Two-axis machining module by the cross slide and spindle CNC Components, such as two-coordinate CNC milling module. Column moving type CNC coordinate processing module (Figure 6), the tool can be realized in the three coordinate movement, according to workpiece varieties and processing tasks with Tool, tool change and the required mechanical hand tools, high Flexible. This processing module is flexible automatic line processing of multi species one of the most important modules. 立柱移動式CNC三坐標加工模塊可利用X軸和Y軸的聯動來實現周邊銑削工藝，特別是在銑削象變速箱體這類剛性較差的工件時，可采用較小直徑的銑刀，實現高速(切削速度達2500m/min)周邊銑削，由此減小加工時的切削力和工件的變形。 Mobile column CNC machining module can make use of X coordinate axis and Y axis of the linkage to achieve the peripheral milling process, particularly in the milling body such as the transmission of less rigid workpiece, we can use smaller diameter cutter, high-speed (cutting speed up to 2500m/min) milling around, thus reducing processing time of cutting force and workpiece deformation. This is more than double coordinate milling module for milling cutters with large diameter to be superior. Multi-axis machining module is another important module, mainly for processing box and disc type work flexible combination of machine tools and flexible automatic lines.這類模塊有多種不同的結構形式，但基本上可分為自動換箱式多軸加工模塊(圖7)、轉塔式多軸加工模塊(圖8)和回轉工作臺式多軸加工模塊(圖9)。 How such module structure of different forms, but basically can be divided into automatic processing module for box-type multi-axis (Figure 7), turret multi-axis machining module (Figure 8) and multi-axis machining module Rotary Table (Figure 9). As for box-type module automatically be set in a special multi-axle box to store more and more libraries axle box, it can be used to process more parts of different species. 而轉塔式和回轉工作臺式多軸加工模塊，由于在轉塔頭和回轉工作臺上允許裝的多軸箱數量有限(一般為46個)，所以這種加工模塊只能實現有限品種的加工。 The turret and multi-axis machining module Rotary Table, due to the turret head and turn the table to allow installation of a limited number of multi-axle box (usually 4 to 6 months), so this processing module can only achieve limited variety of processing. 在自動線上采用CNC三坐標加工模塊和轉塔式多軸加工模塊，不僅可實現不同品種工件的加工，而且在自動線節拍時間內(如果節拍時間允許的話)，這類加工模塊還可以在同一個加工工位上通過其自動換刀或換箱，依次實現多道加工工序(粗鏜、半精鏜和精鏜；鉆孔、擴孔和攻絲)，從而減少自動線的加工工位數，縮短自動線的長度。 CNC Coordinate with automatic online processing modules and turret multi-axis machining modules, not only enables workpieces of different varieties, but also in the automatic line beat of time (if time permits, then the beat), this type of processing module can also be in the same processing station on the exchange through its automatic tool changing or box, and then click to realize multi-channel processing operation (rough boring, semi-fine boring and precision boring; drilling, reaming and tapping), thereby reducing the processing work automatically line the median, Automatic line to shorten the length. 單軸和多軸復合加工模塊是一種三坐標數控加工模塊，可通過自動換刀或自動更換多軸箱而實現單軸加工或多軸加工。 Single and multi-axis coordinate complex processing module is a CNC machining modules, can be automatically replaced by ATC, or multi-axle box and the realization of single-axis machining or multi-axis machining.值得提及的是，在80年代中期德國Honsberg公司推出的CNCMACH模塊化系統(圖10)是很有特色的一種模塊化系統，該系統充分應用模塊化結構原理，在作為系統基礎模塊的CNC三坐標模塊上，通過增減各種不同的功能模塊，拼裝成各種不同坐標或不用工藝用途的加工模塊。 It is worth mentioning that in the mid 80s the company introduced CNCMACH Germany Honsberg modular system are characteristic of a modular system, modular structure of the full application of the principle as a basic module of the CNC system CMM module, through changes in various functional modules, assembled into a variety of different processes do not use coordinates or processing modules. Specifically, from the coordinates, except coordinate, it can also form two-coordinate and single-axis machining module; view from the Tool can be installed in libraries and multi-axle box tool libraries, can be realized individually or axle box of tools automatic replacement can also be followed to achieve the replacement tool and multi-axle box. CNCMACH系統，不僅在機械結構方面，而且在控制和軟件等方面也是模塊化的。 CNC MACH system, not only in the mechanical structure, but also in control and software is modular and so on. Therefore, the use of the system modules can be easily assembled into flexible transfer lines (FTL), flexible manufacturing cell (FMC) or flexible manufacturing system (FMS). In addition to the various CNC machining modules, the robot and servo-driven machine tools and jigs is also flexible combination of a key component of flexible automatic lines. Particularly in the flexible nature of automatic online, now more common use of air-frame gantry robot automatic loading and unloading workpieces, for workpiece transfer position or flipped. For the handling of different workpieces can be set in the automatic line next to the gripper base in order to achieve the automatic gripper change. Fixture equipped with servo drives, to adapt to different job families in the automatic clamping work pieces. 該線采用的數控加工模塊有四個雙坐標數控銑削模塊、六個數控轉塔式多軸加工模塊和六個數控三坐標加工模塊。 The line used in CNC machining module has four double-axis NC milling module, six CNC turret CNC multi-axis machining module and six coordinate processing module. Secondary station and the cleaning station operations by the robot workstation installation folder. As the composition of automatic wire processing module is NC, when the transformation process from a workpiece to another workpiece processing, simply by changing the NC program on the line, without the need for machinery, adjustment and modification. 4、 the increasing degree of integrated automation近十年來，為進一步提高工件的加工精度和減少工件在生產過程中的中間儲存、搬運以及縮短生產流程時間，將工件加工流程中的一些非切削加工工序(如工序間的清洗、測量、裝配和試漏等)集成到自動線或自動線組成的生產系統中(圖15)，以實現工件加工、表面處理、測量和裝配等工序的綜合自動Over the past decade, in order to further improve the machining accuracy of workpiece and the workpiece during the production process to reduce intermediate storage, handling and production processes to shorten the time the workpiece machining process in some non-cutting operations (such as inter-process cleaning, measurement, assembly and leak testing, etc.) integrated into the automated line or automatic line production system consisting of (Figure 15), in order to achieve workpiece machining, surface treatment, measurement and assembly processes of integrated automation. 清洗 Clean：In the automatic line and automatic line consisting of production systems, cleaning equipment, parts of the process is mainly used for cleaning and parts between the final cleaning. 工件的工序間清洗主要是為下一道工序創造必要的工作條件。 Between the cleaning processes the workpiece is mainly for the next process to create the necessary conditions of work. For example, the workpiece blank in the painting before, after processing the workpiece datum, deburring, the measurements carried out before and a variety of cleaning before assembly. 當今，鑒于我們?nèi)祟愘囈陨娴沫h(huán)境日益受到工業污染的破壞，環境保護已引起人們的普遍重視。 Today, in view of the survival of our human environment is increasingly damaged by industrial pollution; environmental protection has attracted much attention. 近年來，國內外越來越關注工業清洗對環境的污染。 In recent years, more and more concerned with industrial cleaning at home and abroad on the environment. 這就促使許多工業部門的零件清洗轉向應用水劑清洗(采用酸性、中性或堿性清洗液，清洗液中主要含有磷酸鹽、活性劑和絡合劑等)，這種水劑清洗主要根據工件清洗質量要求而采用噴淋(分散清洗)和浸漬(集中清洗)兩種工藝。 This has prompted many industries move on aqueous parts cleaning washing (using acidic, neutral or alkaline cleaning liquid, cleaning liquid containing mainly phosphate, active agents and complexing agents, etc.), primarily on the basis of such aqueous cleaning workpiece quality requirements and use of cleaning spray (distributed cleaning) and immersion (concentrated cleaning) are two processes. 基于環境保護、現場操作工人的保健和清洗工藝的合理化等要求，目前，清洗機已普遍采用封閉式布局，整個清洗過程是自動進行的，設備控制采用可編程控制器，并自動監控所有機械動作和工藝技術參數。 Based on environmental protection, health care workers, field operations and cleaning process of rationalization and other requirements, now, cleaning machine has been widely used closed-end layout, Zheng Ge cleaning process is automatic and programmable controller equipment control, and automatic monitoring of all mechanical action and technical parameters. In such washing machines integrated evaporation, filtration, material recovery and processing devices, as shown in Figure 16 is a German Benz steering shell cleaning process. The washing machine is closed layout, the cleaning process is conducted in a closed system, through a cleaning fluid purification support system to achieve the recycling of cleaning fluid. In this system, as a purification unit is a core component of purification and recycling modules cleaning. The module consists of ultra-fine filters and evaporator joint composition, use of the integrated purification equipment and cleaning fluid produced by distilled water, re-used for parts cleaning and rinsing. 5、Automatic measurement 在自動線上采用自動測量旨在對工件的加工質量進行監控。 Automatic line automatic measurement of the workpiece to the processing quality control. In recent years, due to the increasingly automated line to shorten cycle times, the accuracy of the workpiece and the measurement and also become increasingly demanding production conditions, therefore the automatic measurement system must not only work with high speed and high work precision, and to have strong anti-environmental interference (such as chips, dust, steam coolant, oil, vibration and temperature, etc.) capability or some interference with the measurement system can automatically compensate the amount of performance. 在自動線上，自動測量可分為加工前測量和加工后測量。 The automatic line, automatic measurement can be divided into pre-processing measurement and processed measurements. 加工前測量是在工件加工前通過測量以確定工件的特征，并利用測量結果來調整刀具相對于工件待加工部位的位置，然后進行相應的加工。 Processing before the measurement is in the workpiece before the workpiece by measuring to determine the characteristics and use measurements to adjust the tool position relative to the location of