卷?yè)P(yáng)機傳動裝置三維設計與分析【展開式二級圓柱直齒輪減速器設計】【說明書+CAD+PROE+仿真】

卷?yè)P(yáng)機傳動裝置三維設計與分析【展開式二級圓柱直齒輪減速器設計】【說明書+CAD+PROE+仿真】,展開式二級圓柱直齒輪減速器設計,說明書+CAD+PROE+仿真,卷?yè)P(yáng)機傳動裝置三維設計與分析【展開式二級圓柱直齒輪減速器設計】【說明書+CAD+PROE+仿真】,卷?yè)P(yáng)機,傳動,裝置,三維設計,分析,展開式 說明書 作 者: 學 號： 系: 專 業: 題 目: 卷?yè)P(yáng)機傳動裝置三維設計與分析 指導者： (姓 名) (專業技術職務) 評閱者： (姓 名) (專業技術職務) 2010年 6 月 中文摘要 本文課題是卷?yè)P(yáng)機傳動裝置三維設計與分析，主要是對卷?yè)P(yáng)機的傳動裝置進行設計，包括齒輪的設計、軸的設計、箱體的設計及一些附件的設計等，并同過計算機輔助設計，如CAD、Pro/E等，建立減速器的裝配圖及三維模型。最后對三維模型進行運動仿真。論文內容主要包括以下幾個部分： （1）傳動裝置的總體設計。主要包括擬定傳動方案，選擇電動機，確定總傳動比和分配各級傳動比以及計算傳動裝置的運動和動力參數。 （2）傳動零件設計。傳動零件（齒輪及軸）的設計計算，包括確定傳動零件的材料、熱處理方法、參數、尺寸和主要結構，并進行校核。 （3）減速器裝配圖的設計。包括機箱及一些相關零件的結構設計，并通過CAD軟件完成裝配圖紙及主要零件的工作圖。 （4）運用Pro/E建立減速器的三維模型，并進行運動仿真分析。 關鍵詞 卷?yè)P(yáng)機 減速器 設計 運動仿真 外文摘要 Title The 3D Design and Analysis of Hoist Gearing Abstract This topic is 3D design and analysis of hoist gearing, mainly for design of hoist gearing, include the design of gear, shaft, box and a number of accessories, and establish reducer assembly drawings and 3D model with computer-aided design like CAD and Pro/E. Finally, do some motion simulation of the 3D model. Thesis includes the following sections: (1)Overall design of the gearing. Mainly include the development of transmission scheme, select motor to determine the transmission ratio and the distribution of the total transmission ratio at all levels and to calculate the transmission of motion and dynamic parameters. (2)Design of transmission parts. Design and calculation of transmission parts (gear and shafts), including to determine the materials, heat treatment methods, parameters, size and main structure of transmission parts, and do some check. (3)Design of assembly drawing of reducer. Including structural design of the box and some relevant parts, and complete the assembly drawings and the work plan of major parts by CAD software. (4)Establish 3D model of the reducer by Pro/E, and do some simulation exercise. Keywords hoist reducer design motion simulation