FSAE賽車雙橫臂式前懸架設計【說明書+CAD+PROE】

FSAE賽車雙橫臂式前懸架設計【說明書+CAD+PROE】,說明書+CAD+PROE,FSAE賽車雙橫臂式前懸架設計【說明書+CAD+PROE】,fsae,賽車,雙橫臂式前,懸架,設計,說明書,仿單,cad,proe 黑龍江工程學院本科生畢業設計摘 要本設計結合懸架設計知識，詳細分析了懸架結構，對雙橫臂獨立懸架進行了設計計算。在此基礎上，應用虛擬樣機技術，在ADAMS/View中對雙橫臂獨立懸架進行合理簡化并建模，并對模型進行了參數化，定制界面，即改變初始參數就能快速生成不同的懸架模型，提高了仿真分析以及優化設計的效率，使平臺具有開放性。分析研究了所需優化的變量（前輪外傾角、車輪側滑量）及其函數表達式。進行了懸架動力學仿真分析，研究懸架各性能參數在車輪跳動過程中的變化趨勢，并指出需要改進的地方。分析每個設計變量的變化對樣機性能的影響，提出優化設計的方案。再次進行仿真，對比分析了優化前后的仿真結果，并評價了優化方案。優化后懸架的性能明顯提高，驗證了優化方案的可行性，并完成虛擬設計及試驗。最后運用Pro/E軟件對雙橫臂獨立懸架進行實體的建立。本設計研究的目的和意義為在賽車制造前進行設計和試驗仿真，并且提出改進意見，可以發現并更正設計缺陷，完善設計方案，提高設計質量和效率。關鍵詞：雙橫臂；獨立懸架；虛擬樣機技術；優化；ADAMSABSTRACTOn the basis of the Suspension design, this paper calculated a detailed requirements for double wishbone independent suspension structure, I simplified and built a model of double wishbone independent suspension system in ADAMS/View, made the model parameters, then the model was open, and prepared the necessary measuring function. I discussed the performance of the front wheel alignment parameters in a front wheel vehicle positioning. The model was a virtual front suspension test platform. This thesis analyzed the change trend of the suspension performance parameters in the process of flopping the wheel. The impacts of its changes in the trend of design variables are also analyzed, make an optimized design of the program, with the comparative analysis to verify the feasibility of the optimization program before and after the optimization, the suspensions key data was generated, the virtual design and test were finished. Finally I used Pro/E for double wishbone independent suspension a modeling.The design for the purpose and significance of the study in car manufacturing design and test before simulation, and puts forward Suggestions of improvement can be found and corrected design flaw, perfecting the design scheme, and improve the design quality and efficiency.Keywords: Double Wishbone; Independent suspension; Virtual Prototyping Technology; Optimize; ADAMSII