喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:1064457796 或 1304139763】
徐州師范大學本科生畢業設計 管架注塑模設計
[摘 要]：
本文詳細介紹了管架注塑模的設計過程。首先分析原始資料，然后確定分型面和型腔排列方式，接著設計側抽芯機構以及導滑槽和滑塊，還對成型零件、型腔壁厚、加熱和冷卻等進行了計算，最后對注塑機進行校核。本設計介紹了中等復雜程度注射模具的設計過程，并對塑件進行了模流分析，在分析數據的基礎上再對模具設計進行優化和改進,提高了模具設計的質量，縮短了設計時間。
[關鍵詞]：
注塑模設計 注射成型 模流分析
[Abstract]:
This paper was detailed to introduce a design process of pipe frame injection mold. First to analysis original data, then decide the divide surface of cavity and the arrange way of mold cavity , designing the side take out core outfit and guide runner and slide block , still carried on the calculation towards modeling part, cavity deep and thick, hot up and cooling, at last ,check the data of injection molding machine. This design introduces the design process of a middle complexity injection mold, and take the molding part for a mold flow analysis , on the foundation of the analysis data, optimize and improve the molding design so that to increase the quality of molding design and shorten the design time.
[Key words]:
The design of injection mold injection molding
Mold flow analysis