哈爾濱工程大學本科生畢業設計I摘 要柔性制造系統（FMS）是集成了自動控制技術、人工智能、計算機語言編程組態監控等現代化技術的生產設備。目前實踐教學作為教學過程中的一個環節，是工科院校培養跨世紀創造性人才必不可少的。為配合卓越工程師試點工作中的課程改革，結合教學研究任務，本設計針對學校實驗室的柔性制造系統中的立體倉庫環節進行實驗前期準備工作。本設計主要由三層 12 倉位的立體倉庫和四自由度碼垛機械手兩部分組成。其中碼垛機械手由機械傳動部分和電氣控制兩部分組成，電氣控制是由西門子 S7-200 CPU224XP 型可編程控制器(PLC)、步進電機驅動器、開關電源、位置傳感器等器件組成。在設計過程中，不斷參閱相關電氣設計規范的資料，參照現有的碼垛機的工作模式及控制方法，最終完成 PLC 為控制核心的碼垛單元的 PLC 控制系統設計，并應用組態軟件制作監控仿真界面。關鍵詞：柔性制造系統；碼垛機；立體倉庫；PLC；組態哈爾濱工程大學本科生畢業設計IIABSTRACTA Flexible manufacturing systems (FMS) is the production equipment, which integrates the automatic control technology, artificial intelligence, computer programming language configuration and monitoring modern technology.The current practice of teaching as teaching process of a part is the training of cross century creative talents in Colleges of engineering is essential. As with outstanding engineer pilot work in the curriculum reform, combined with teaching and research tasks, the design for the school laboratory in the flexible manufacturing system of stereoscopic warehouse links in experimental preparations.This system is mainly composed of three layers of 12 positions of the warehouse and four degrees of freedom palletizing manipulator. The palletizing manipulator is composed of a mechanical drive and an electric control. The electrical control is formed by Siemens S7-200 CPU224XP programmable logic controller (PLC), stepper motor drive power modules, switching power supply, sensors and other devices.During the design process, the author refers a lot of the materials concerning the electrical design specification, refer to the existing palletizer work mode and control method, finally completed the PLC as control core Palletizing unit PLC control system design, and the application of configuration software production control simulation interface.Key words: Flexible manufacturing systems; Palletizer; Stereoscopic warehouse; PLC; Configuration哈爾濱工程大學本科生畢業設計3目 錄摘要 ?????????????????????????????????? IAbstract ??????????????????????????????? II第 1 章 緒論 ?????????????????????????????? 11.1 課題背景 ???????????????????????????? 11.2 碼垛機的概述 ?????????????????????????? 11.2.1 碼垛機在國外的研究現狀 ??????????????????? 11.2.2 碼垛機在國內的研究現狀 ??????????????????? 21.2.3 碼垛機的發展趨勢 ?????????????????????? 31.3 課題的主要研究內容 ??????????????????????? 3第 2 章 碼垛機的總體方案設計 ???????????????????? 42.1 碼垛機的總體框圖 ???????????????????????? 42.2 碼垛機的結構組成 ???????????????????????? 52.3 碼垛機的控制方案 ???????????????????????? 62.3.1 碼垛機的控制功能要求 ???????????????????? 62.3.2 碼垛機的控制方案確定 ???????????????????? 62.3.3 碼垛機的定位方案確定 ???????????????????? 72.4 本章小結 ???????????????????????????? 9第 3 章 碼垛機的硬件設計選型及介紹 ???????????????? 103.1 電動機的計算選取 ???????????????????????? 103.1.1 碼垛機的已知參數 ????????????????????? 103.1.2 根據已知參數對電動機的選型計算 ?????????????? 103.2 步進電機驅動器的介紹 ?????????????????????? 113.3 可編程控制器的選型及 I/O 分配 ?????????????????? 133.3.1 可編程控制器的選型 ???????????????????? 133.3.2 可編程控制器的 I/O 分配 ?????????????????? 133.4 導軌的形式介紹 ????????????????????????? 143.5 滾珠絲杠的介紹 ????????????????????????? 153.6 本章小結 ???????????????????????????? 15第 4 章 碼垛機的軟件設計 ?????????????????????? 16哈爾濱工程大學本科生畢業設計44.1 編程軟件介紹及使用 ??????????????????????? 164.2 碼垛機的 PLC 程序設計 ?????????????????????? 184.2.1 碼垛機的工作流程 ????????????????????? 184.2.2 碼垛機的軟件設計 ????????????????????? 204.3 本章小結 ???????????????????????????? 37第 5 章 組態王仿真畫面的設計 ???????????????????? 385.1 組態王監控軟件介紹 ??????????????????????? 385.2 組態王監控軟件仿真設計 ????????????????????? 385.2.1 建立組態軟件與 PLC 之間的通訊連接 ????????????? 395.2.2 組態畫面及監控元素的設計 ????????????????? 405.3 本章小結 ???????????????????????????? 45結論 ????????????????????????????????? 46參考文獻 ??????????????????????????????? 47致謝 ????????????????????????????????? 49附錄 ????????????????????????????????? 50