PSH4D型立體停車庫橫移傳動機構設計

PSH4D型立體停車庫橫移傳動機構設計,psh4d,立體,車庫,傳動,機構,設計 目 錄 摘 要 …………………………………………………………………………………Ⅰ Abstract ………………………………………………………………………………Ⅱ 1 緒論………………………………………………………………………………………1 1.1 立體停車庫的設計背景和意義……………………………………………………1 1.2 國內外研究現狀……………………………………………………………………1 1.2.1 國外研究現狀 …………………………………………………………………1 1.2.2 國內研究現狀 …………………………………………………………………2 1.3 立體停車庫的類型…………………………………………………………………2 1.3.1 升降橫移式 ……………………………………………………………………3 1.3.2 巷道堆垛式 ……………………………………………………………………3 1.3.3 垂直提升式 ……………………………………………………………………4 1.3.4 水平或垂直循環式 ……………………………………………………………5 2 橫移傳動機構的設計 …………………………………………………………………7 2.1 第一層橫移傳動機構設計…………………………………………………………7 2.1.1 第一層基本參數確定 …………………………………………………………7 2.1.2 第一層橫移電機選擇 …………………………………………………………8 2.1.3 第一層傳動系統設計 …………………………………………………………9 2.2 第二層橫移傳動機構設計 ………………………………………………………19 2.2.1 第二層基本參數確定…………………………………………………………19 2.2.2 第二層橫移電機選擇…………………………………………………………20 2.2.3 第二層傳動系統設計…………………………………………………………21 3 總結 ……………………………………………………………………………………32 致謝 ………………………………………………………………………………………33 參考文獻 …………………………………………………………………………………34 重慶理工大學畢業論文 PSH4D型立體停車庫橫移傳動機構設計 摘 要 本文主要是對PSH4D型立體停車庫的橫移傳動機構進行設計。PSH4D型立體停車庫一共有三層，每個停車位都有一個載車板，而第一層和第二層各有一個空位。上層的載車板如果要移動到下層，就需要將下層的載車板橫向移開，為上層的載車板提供空間進行升降。因此，第一層和第二層的每個停車位都有一個橫移傳動機構對載車板進行橫向移動。由于第三層停車位上的載車板只需要進行升降移動，不需要進行橫向移動，所以第三層沒有橫移傳動機構。橫移傳動機構主要靠電機帶動鏈輪使?jié)L輪在軌道上滾動，從而讓載車板進行橫向移動。 第一層的橫移傳動機構與載車板直接連成一體，第二層的橫移傳動機構則置于車位架上。橫移傳動機構主要由電動機、傳動軸、滾輪、鏈輪和支承座等幾部分組成，對橫移傳動機構的設計也就主要是對這幾部分的選擇和設計。 關鍵詞：立體停車庫 橫移傳動機構 載車板 Abstract This paper is mainly designed traversing transmission mechanism of PSH4D type stereo garage. PSH4D type stereo garage a total of three layers, each parking space has a car, and the first and second layers each have a vacancy. The car carrying board to move to a lower level, you need to lower the car sideways, to provide space for the car carrying board for lifting. Therefore, each parking spaces in the first layer and the second layer has a transverse transmission mechanism for horizontal movement of the vehicle loading plate. Because of the third layers of parking spaces on the board only needs to carry on the lifting movement, without the need for lateral movement, so the third layer without traversing transmission mechanism. Transverse transmission mechanism is mainly driven by the motor wheel to wheel rolling on the track, so that the car carrying board to move horizontally. Traversing transmission mechanism of the first layer and the board is directly connected, traversing drive mechanism of the second layer are arranged in the parking rack. Traversing transmission mechanism is mainly composed of a motor, transmission shaft, roller, sprocket and the supporting seat is composed of several parts, design of the transverse transmission mechanism is mainly on the selection and design of these parts. Key words: stereo garage , traversing transmission mechanism , car-carrying board 2