CA10B解放牌汽車調整臂外殼工藝規程及專用夾具設計【車φ60孔及端面】【鉆φ13.8和φ16沉孔】【說明書+CAD+3D】
購買設計請充值后下載，資源目錄下的文件所見即所得，都可以點開預覽，資料完整，充值下載可得到資源目錄里的所有文件。【注】：dwg后綴為CAD圖紙，doc,docx為WORD文檔，原稿無水印，可編輯。具體請見文件預覽，有不明白之處，可咨詢QQ:12401814
參考文獻1. Silverman, M.P., 1993. The Wirbelrohrs Roar. Cambridge University Press, Chpt 6, pp: 221-240.2. Ranque, G., 1993. Experiences sur la dtente giratore avec productions simulanees dun echappement dair chaud et dum echappement dair froid. Bull. Soc. France Phys., 1128: (J. Phys. Radium, 4, Ser.7).3. Dissler, R.G. and M. Permutter, 1960. Analysis of the flow and energy separation in a turbulent vortex. Int. J. Heat Mass Transfer, 1: 173-191.4. Gulyaev, A., 1966. Vortex tube and the vortex effect, soviet physics. Tech. Phys., 10 (10): 326-331.5. Hilsch, R., 1947. The use of the expansion of gases in a centrifugal field as cooling process. Rev. Sci. Instrum., 18 (2): 108-1113.6. Lewins J. and A. Benjan, 1999. Vortex tube optimisation theory. J. Energy, 24: 931-943.7. Saidi, M.H. and M.R. Allaf Yazdi, 1999. Energy model of a vortex tube system with experimentalresults. J. Energy, 24: 625-632.8. Ay, H. and W.J. Yang, 1998. Heat transfer and life of metal cutting tools in turning. Int. J. Heat Mass Trans., 41: 613-623.9. OSullivan, D. and M. Cotterell, 2001. Temperature measurement in single turning point.J. Master. Proc. Tech., 118: 301-308.10. Young, H.T., 1996. Cutting temperatures to flank wear. Wear, 201: 117-120.11. Cook, N., 1973. Tool wear and tool life. ASME Tran. J. Energy. Ind., 95: 931-938.12. Liu, J., 2005. Research on experiments and action mechanism with water vapour as coolant andlubricant in green cutting, Int. J. Mach. Tools Manuf., 45: 687- 694.
收藏