喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有,,請放心下載，==================================
【QQ：3278627871 可咨詢交流】
喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有,,請放心下載，==================================
【QQ：3278627871 可咨詢交流】
喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有,,請放心下載，==================================
【QQ：3278627871 可咨詢交流】
摘要
為解決城市垃圾運輸，減少運輸過程中的二次污染問題，提高運輸效率、降低工人勞動強度，本課題研究設計了全密封壓縮式環保垃圾車。
本課題首先介紹了后裝壓縮式垃圾車總體設計的5個原則，然后對這6個原則依次進行了詳細的論證分析，在此基礎上與傳統的垃圾車機構進行比較，確定了設計方案。①在設計計算部分，根據設計要求確定了垃圾車的結構參數，并根據結構參數對垃圾車的發動機進行了選型。②根據裝載要求，對后裝壓縮式垃圾車的整體結構參數進行了設計計算，其中包括料斗容積和污水箱容積的計算；③汽車底盤主要是二類底盤的選用及其改造，根據載荷分布對各軸的負荷進行了細化分配，同時對整車的性能參數也依據標準進行了選用，主要確定了最高車速、燃料經濟性參數、機動性參數和通過性參數等；④以及對軸距、前后輪距、外廓尺寸等整車尺寸參數的確定；⑤為確保整車性能對車架進行了受力分析和強度校核、液壓系統油缸的受力分析與強度校核。
關鍵詞：后裝；壓縮；垃圾車；環保；垃圾運輸
Abstract
In order to solve the problems of town garbage transportation, two contamination in the transportation, thus improve the transportation efficiency, and reduce the worker labor intensity, this paper has designed the entire seal compression type garbage truck.
This topic first introduce the 5 principles in the overall design of back ward loading compression garbage truck, and then gave detailed proof analysis to the 5 principles. The author compares the new design with the traditional one. In design and the calculation part, the structure parameter of the garbage truck, and the engine of the dumpcart are chosen according with the requirements. According to the loading request, the design of the back ward loading compression type garbage truck are calculated, including the hopper volume and the dirt water tank volume computation. The motor car chassis is mainly on the chassis selections and the reformation, and the axes load distribution. In the same time, the entire vehicle performance parameter based on the standard has been selected, according to the maximum speed, the fuel economy parameter, the mobile parameter and passed the parameter and so on; and to confirm the parameters of axes distance, the distance of the front and back wheels, and the size of outside profile. In order to guarantee the completed car performance, have done the stress and strength checking, the stress analysis and strength checking of liquid pressure system.
Key words: Back loading；compression；garbage truck；environmental protection ；refuse transportation