帶輪零件的加工工藝及夾具設計-斜砌-滑塊式定心夾緊三爪卡盤（含全套CAD圖紙）

帶輪零件的加工工藝及夾具設計-斜砌-滑塊式定心夾緊三爪卡盤（含全套CAD圖紙）,零件,加工,工藝,夾具,設計,斜砌,滑塊式,定心,夾緊,卡盤,全套,cad,圖紙 常州機電職業技術學院 畢業設計（論文） 作 者： 學 號： 系 部： 專 業： 題 目： 帶輪零件的加工工藝及夾具設計 　 校內指導教師： 企業指導教師 評閱者： 年 月 II 摘 要 本設計是基于帶輪零件的加工工藝規程及一些工序的專用夾具設計。帶輪零件的主要加工表面是外圓及孔系。一般來說，保證平面的加工精度要比保證孔系的加工精度容易。因此，本設計遵循先面后孔的原則。并將孔與平面的加工明確劃分成粗加工和精加工階段以保證孔系加工精度。夾具選用專用夾具，夾緊方式多選用手動夾緊，夾緊可靠，機構可以不必自鎖。因此生產效率較高。適用于大批量、流水線上加工。能夠滿足設計要求。 關鍵詞：帶輪類零件；工藝；夾具； ABSTRACT The design is based on the body parts of the processing order of the processes and some special fixture design. Body parts of the main plane of the surface and pore system. In general, the plane guarantee processing precision than that of holes machining precision easy. Therefore, this design follows the surface after the first hole principle. Plane with holes and the processing clearly divided into roughing and finishing stages of holes to ensure machining accuracy. Datum selection box input shaft and the output shaft of the supporting hole as a rough benchmark, with top with two holes as a precision technology reference. Main processes arrangements to support holes for positioning and processing the top plane, and then the top plane and the supporting hole location hole processing technology. In addition to the follow-up processes individual processes are made of the top plane and technological hole location hole and plane processing. Supported hole processing using the method of coordinate boring. The whole process of processing machine combinations were selected. Selection of special fixture fixture, clamping means more choice of pneumatic clamping, clamping reliable, institutions can not be locked, so the production efficiency is high, suitable for large batch, line processing, can meet the design requirements. Key words: Angle gear seat parts; fixture; IV 目錄 摘 要 I ABSTRACT II 第1章 加工工藝規程設計 1 1.1 零件的分析 1 1.1.1 零件的作用 1 1.1.2 零件的工藝分析 1 1.2 帶輪加工的主要問題和工藝過程設計所應采取的相應措施 2 1.2.1 孔和平面的加工順序 2 1.2.2加工方案選擇 2 1.3 帶輪加工定位基準的選擇 3 1.3.1粗基準的選擇 3 1.3.2 精基準的選擇 3 1.4 帶輪加工主要工序安排 4 1.5 機械加工余量、工序尺寸及毛坯尺寸的確定 6 1.6選擇加工設備及刀、量具 6 1.7確定切削用量及基本工時（機動時間） 7 第2章 斜砌滑塊式定心夾緊三爪卡盤 18 2.1 車床夾具設計要求說明 18 2.2車床夾具的設計要點 18 2.3 定位機構 20 2.4夾緊機構 20 2.5零件的車床夾具的加工誤差分析 21 2.6 確定夾具體結構尺寸和總體結構 22 2.7 零件的車床專用夾具簡單使用說明 24 結 論 25 參考文獻 26 致　謝 28 43