K130-支架尾座體零件加工工藝及鏜φ80mm孔夾具設計帶圖紙

喜歡就充值下載把。資源目錄里展示的全都有，下載后全都有，有疑問咨詢QQ:3278627871 尾座體零件機械加工工藝及其典型夾具設計摘要機械制造技術的發達程度突出反應了一個國家或地區的經濟實力和綜合國力，是一個國家生存、發展與繁榮所依賴的重要基礎。本文對一尾座體零件進行加工工藝分析，并對相關工序設計專用夾具。本設計的基本思路是，首先對零件圖進行分析，選擇毛坯形式、公差及余量。再次是確定加工基準、工藝路線，選擇工藝裝備，設計各個工序的具體內容，確定切削用量及時間定額等。最后設計關鍵工序的夾具。合理選擇加工基準，加工方法，選擇設計出夾具的各個組成部件，如定位元件、夾緊元件、引導元件、夾具體與機床的連接部件以及其它部件；計算出夾具定位時產生的定位誤差，分析夾具結構的合理性與不足之處，并在以后設計中注意改進。設計的夾具應結構簡單，省時省力，裝夾方便，并且對相似的零件的加工有通用性。關鍵詞：工藝；工序；切削用量；夾緊；定位；誤差The Tailstock Body Parts Machining Process and Its Typical Fixture DesignAbstractThe level of the development of the manufacturing technology is strongly respect the economic strength and national strength of a country. The existence and the development of a country depends on the manufacturing technology.This paper mainly discusses the machining technology of a flange and designes these tools used for machining the flange. The basic prodcer of the paper is that first analying the detail drawing of the flange,choosing the blank,the sizesand the basis,second, choosing the machine routing, choosing tools for machining the flange，designing details of erevy procedure，third，design the fixture. All these chooses must be right to make sure the flange meeting the technical requirements. The level of the development of the manufacturing technology is the response of the economic strength and national strength of a country. The existence and the development of a country depends on the manufacturing technology. All these chooses must be right to make sure the flange meeting the technical requirements. The fixture should save time and force，and should has generality. The fixture should save time and force，and should has generality.Key Words: The procers； the working procedure； the cutting specifications,clamp； the localization；the error 目 錄1 緒論11.1題目背景和研究意義11.2本課題研究的主要內容12 零件的分析22.1零件的作用22.2零件的工藝分析23 工藝規程設計33.1確定零件的生產類型33.2確定毛坯的制造形式33.3基面的選擇的選擇33.4制定工藝路線43.5機械加工余量、工序尺寸及毛坯尺寸的確定53.6切削用量及基本時間的確定63.6.1工序的設計63.6.2工序的設計83.6.3工序的設計103.6.4工序的設計153.6.5工序的設計184 夾具的設計214.1夾具的概述214.2夾緊裝置的組成及設計要求214.2.1動力源214.2.2中間傳力機構214.2.3夾緊元件224.3定位誤差的分析與計算234.4夾具設計與操作的簡要說明234.4.1夾具體方式的確定234.4.2夾具的精度要求244.4.3夾具使用注意事項、保養及維護244.5問題的提出244.6夾具的設計244.6.1定位基準的選擇254.6.2銑削力計算254.6.3.定位誤差與分析254.6.4夾具設計及操作的簡要說明254.6.5夾具體的選擇254.6.6夾具體槽形264.6.7夾緊裝置及夾具體設計275 結論29參考文獻30致謝31畢業設計（論文）知識產權聲明32畢業設計（論文）獨創性聲明33