液壓剪板機液壓系統設計
摘 要： 液壓技術是現代制造的基礎，它的廣泛應用，很大程度上代替了普通成型加工，全球制造業發生了根本性變化。因此，液壓技術的水準、擁有和普及程度，已經成為衡量一個國家綜合國力和現代化水平的重要標志。為適合這種行勢，需要大量設計一些液壓機的工作系統。本次就是要設計一款剪板機液壓系統。液壓技術已被世界各國列為優先發展的關鍵工業技術，成為當代國際間科技競爭的重點。
這是機械類液壓設計說明書，是根據液壓設計手冊上的設計程序及步驟編寫的。本設計的主要內容包括：剪板機液壓系統的設計課題及有關參數；液壓缸工作壓力和流量的確定；液壓系統圖的擬定；驅動電機及液壓元件的選擇；液壓系統主要性能的驗算。
關鍵詞：剪板機 液壓缸 液壓泵 系統壓力
Hydraulic plate shears hydraulic
system design
ABSTRACT: Hydraulic technology is the foundation of modern manufacturing, and its wider application, to a large extent replaced the ordinary forming, the global manufacturing sector has undergone fundamental changes. Therefore, the hydraulic technology standards, possession and penetration, has become of a country's comprehensive national strength and an important indicator of the level of modernization. This trip is suitable for potential, a lot needs to design some hydraulic system of work.
The design for hydraulic machinery design specification is based on hydraulic design manual on the design of the procedures and steps to prepare. The main content of this book include: cutting plate machine hydraulic system design issues and related parameters; hydraulic cylinder pressure and flow of work to be confirmed; hydraulic system of the plan drawn up; drive motor and hydraulic components of choice; hydraulic system checking performance of the major design experience.
KEYWORDS: Cutting plate machine Hydraulic cylinder Hydraulic pump Press
目 錄
1 引言 1
1.1 液壓剪板機簡介 1
1.2 液壓剪板機的最新發展 2
1.3 液壓傳動技術的發展概況 3
2 任務分析 4
2.1 液壓剪板機工作參數要求 4
2.2 液壓系統的工作原理 4
2.3 剪板機液壓系統的總體結構 5
2.4 主要機構組成 5
2.5 制定液壓系統的基本方案 7
3 剪板機液壓系統原理圖 7
3.1 系統原理圖 7
3.2 電磁鐵動作順表 9
3.3 剪板機液壓系統的工作過程 9
4 液壓系統的計算及液壓元件的選擇 10
4.1 液壓剪板機工作參數要求 10
4.2 液壓缸的設計 11
4.3 油箱的設計 17
4.4 管件的設計 19
4.5 液壓泵的選擇 19
4.6 閥的選擇 21
4.7 電機的選擇與計算 24
總結與致謝 26
參考文獻 28
附錄 29
1