【溫馨提示】====【1】設計包含CAD圖紙 和 DOC文檔，均可以在線預覽，所見即所得，，dwg后綴的文件為CAD圖，超高清，可編輯，無任何水印，，充值下載得到【資源目錄】里展示的所有文件======【2】若題目上備注三維，則表示文件里包含三維源文件，由于三維組成零件數量較多，為保證預覽的簡潔性，店家將三維文件夾進行了打包。三維預覽圖，均為店主電腦打開軟件進行截圖的，保證能夠打開，下載后解壓即可。======【3】特價促銷，，拼團購買，，均有不同程度的打折優惠，，詳情可咨詢QQ：1304139763 或者 414951605======【4】 題目最后的備注【LB系列】為店主整理分類的代號，與課題內容無關，請忽視
附件2
北華航天工業學院
畢業設計(論文)任務書(理工類)
學生姓名： 陳川 專 業：機械設計制造及其自動化 班 級 B13113
學 號：20134011335指導教師： 黃衛 職 稱：副教授 完成時間： 2017.6
畢業設計(論文)題目：
撥叉工藝及工裝設計
題目來源
教師科研課 題
縱向課題（?。?
題目類型
理論研究（ ）
注：請直接在所屬項目括號內打“√”
橫向課題（?。?
應用研究（ ）
教師自擬課題（√ ）
應用設計（√?。?
學生自擬課題（?。?
其 他（?。?
總體設計要求及技術要點：
運用CAPP基本原理，對常見撥叉進行總結。
1.對零件進行工藝過程設計，并編制相應的工序卡片
（1） 繪制零件圖，并對零件圖進行分析；
（2） 擬定機械加工工藝路線，包括加工方法選擇、定位基準選擇及轉換、確定加工余量和工序尺寸、 確定機床、刀夾量具和輔助工具等；
（3） 編寫零件的機械加工工序卡片；
（4） 對工藝過程進行技術經濟分析。
2.對指定工序的專用夾具進行設計
（1）根據工藝要求，設計并繪制指定工序的專用夾具裝配圖。要求結構合理，工作效率高，制造方便，盡量降低成本和制造難度，并對夾具精度和技術經濟性進行分析；
（2）設計并繪制夾具所有非標準零件的零件圖；
工作環境及技術條件：
給定零件圖
給定零件生產類型：中批生產
工作內容及最終成果：
工作內容：
1.課題調研，完成開題報告、外文資料翻譯、文獻綜述；
2.編制給定零件機械加工工藝文件；
3.根據給定工序內容設計兩套專用夾具；
4.設計并繪制總裝圖中的所有非標準零件；
5.編寫設計說明書。
最終成果：
1.開題報告、外文資料翻譯、文獻綜述各一份；
2.機械加工工序卡片一套
3.給定工序?qū)Ｓ脢A具總裝圖兩張；
4.其中一張總裝圖中所有非標準零件的零件圖；
5.設計說明書一冊。
時間進度安排：
第八學期
第1周：分配課題，熟悉課題內容，熟悉零件圖，做好前期準備；
第2周：查閱資料，搜集相關資料；
第3周：開題報告撰寫、修改，完成開題；
第4周：撰寫文獻綜述，外文資料翻譯，準備各種資料；
第5周：繪制零件三維二維圖；
第6周：對所設計的加工工藝進行技術分析，理論分析；
第7周：工藝方案可行性評價，方案確定，工藝流程設計；
第8周：編寫工序卡片；
第9周：根據工序內容編寫一套銑削夾具設計任務書；
第10周：設計一套銑削專用夾具；
第11周：編寫一套鉆孔夾具設計任務書；
第12周：設計一套鉆孔專用夾具；
第13周：設計的專用夾具進行技術任務分析，并完成分析報告；
第14周：工裝使用說明書撰寫；
第15周：其他時間，打印圖紙，打印其分析報告，準備答辯；
指導教師簽字： 年 月 日
教研室主任意見：
教研室主任簽字： 年 月 日
——
密 級
分類號
編 號
成 績
本科生畢業設計 (論文)
外 文 翻 譯
原 文 標 題
MACHINING FIXTURE LOCATING AND
CLAMPING POSITON OPTIMIZATION
USING GENETIC ALGORITHMS
譯 文 標 題
采用遺傳算法優化加工夾具定位和加緊位置
作者所在系別
機電工程學院
作者所在專業
機械設計制造及其自動化
作者所在班級
B13113
作 者 姓 名
陳川
作 者 學 號
20134011335
指導教師姓名
黃 衛
指導教師職稱
副教授
完 成 時 間
2017
年
3
月
北華航天工業學院教務處制
譯文標題
采用遺傳算法優化加工夾具定位和加緊位置
原文標題
MACHINING FIXTURE LOCATING AND CLAMPING POSITON OPTIMIZATION USING GENETIC ALGORITHMS
作 者
David. P. Flores
譯 名
戴維·P·弗洛雷斯
國 籍
美國
原文出處
Mechanism and Machine Theory
采用遺傳算法優化加工夾具定位和加緊位置
摘要：工件變形的問題可能導致機械加工中的空間問題。支撐和定位器是用于減少工件彈性變形引起的誤差。支撐、定位器的優化和夾具定位是最大限度的減少幾何在工件加工中的誤差的一個關鍵問題。本文應用夾具布局優化遺傳算法（GAs）來處理夾具布局優化問題。遺傳算法的方法是基于一種通過整合有限的運行于批處理模式的每一代的目標函數值的元素代碼的方法，用于來優化夾具布局。給出的個案研究說明已開發的方法的應用。采用染色體文庫方法減少整體解決問題的時間。已開發的遺傳算法保持跟蹤先前的分析設計，因此先前的分析功能評價的數量降低大約93%。結果表明，該方法的夾具布局優化問題是多模式的問題。優化設計之間沒有任何明顯的相似之處，雖然它們提供非常相似的表現。
關鍵詞：夾具設計；遺傳算法；優化
1.引言
夾具用來定位和束縛機械操作中的工件，減少由于對確保機械操作準確性的夾緊方案和切削力造成的工件和夾具的變形。傳統上，加工夾具是通過反復試驗法來設計和制造的，這是一個既造價高又耗時的制造過程。為確保工件按規定尺寸和公差來制造，工件必須給予適當?shù)亩ㄎ缓蛫A緊以確保有必要開發工具來消除高造價和耗時的反復試驗設計方法。適當?shù)墓ぜㄎ缓蛫A具設計對于產品質量的精密度、準確度和機制件的完飾是至關重要的。
從理論上說，3-2-1定位原則對于定位所有的棱柱形零件是很令人滿意的。該方法具有最大的剛性與最少量的夾具元件。從動力學觀點來看定位零件意味著限制了自由移動物體的六自由度（三個平動自由度和三個旋轉自由度）。在零件下部設置三個支撐來建立工件在垂直軸方向的定位。在兩個外圍邊緣放置定位器旨在建立工件在水平x軸和y軸的定位。正確定位夾具的工件對于制造過程的全面準確性和重復性是至關重要的。定位器應該盡可能的遠距離的分開放置并且應該放在任何可能的加工面上。放置的支撐器通常用來包圍工件的重力中心并且盡可能的將其分開放置以維持其穩定性。夾具夾子的首要任務是固定夾具以抵抗定位器和支撐器。不應該要求夾子反抗加工操作中的切削力。
對于給定數量的夾具元件，加工夾具合成的問題是尋找夾具優化布局或工件周圍夾具元件的位置。本篇文章提出一種優化夾具布局遺傳算法。優化目標是研究一個二維夾具布局使工件不同位置上最大的彈性變形最小化。ANSYS程序以用于計算工件變形情況下夾緊力和切削力。本文給出兩個實例來說明給出的方法。
2.回顧相關工程結構
最近幾年夾具設計問題受到越來越多的重視。然而，很少有注意力集中于優化夾具布局設計。Menassa和Devries用FEA計算變形量使設計準則要求的位點的工件變形最小化。設計問題是確定支撐器位置。Meyer和Liou提出一個方法就是使用線性編程技術合成動態編程條件中的夾具。給出了使夾緊力和定位力最小化的解決方案。Li和Melkote用非線性規劃方法解決布局優化問題。這個方法使工件位置誤差最小化歸于工件的局部彈性變形。Roy和Liao開發出一種啟發式方法來計劃最好的支撐和夾緊位置。Tao等人提出一個幾何推理的方法來確定最優夾緊點和任意形狀工件的夾緊順序。Liao和Hu提出一種夾具結構分析系統這個系統基于動態模型分析受限于時變加工負載的夾具—工件系統。本文也調查了夾緊位置的影響。Li和Melkote提出夾具布局和夾緊力最優合成方法幫我們解釋加工過程中的工件動力學。本文提出一個夾具布局和夾緊力優化結合的程序。他們用接觸彈性建模方法解釋工件剛體動力學在加工期間的影響。Amaral等人用ANSYS驗證夾具設計的完整性。他們用3-2-1方法。ANSYS提出優化分析。Tan等人通過力鎖合、優化與有限建模方法描述了建模、優化夾具的分析與驗證。
以上大部分的研究使用線性和非線性編程方式這通常不會給出全局最優解決方案。所有的夾具布局優化程序開始于一個初始可行布局。這些方法給出的解決方案在很大程度上取決于初始夾具布局。他們沒有考慮到工件夾具布局優化對整體的變形。
GAs已被證明在解決工程中優化問題是有用的。夾具設計具有巨大的解決空間并需要搜索工具找到最好的設計。一些研究人員曾使用GAs解決夾具設計及夾具布局問題。Kumar等人用GAs和神經網絡設計夾具。Marcelin已經將GAs用于支撐位置的優化。Vallapuzha等人提出基于優化方法的GA，它采用空間坐標來表示夾具元件的位置。夾具布局優化程序設計的實現是使用MATLAB和遺傳算法工具箱。HYPERMESH和MSC / NASTRAN用于FE模型。Vallapuzha等人提出一些結果關于一個廣泛調查不同優化方法的相對有效性。他們的研究表明連續遺傳算法提出了最優質的解決方案。Li和Shiu使用遺傳算法確定了夾具設計最優配置的金屬片。MSC/NASTRAN已經用于適應度值評價。Liao提出自動選擇最佳夾子和夾鉗的數目以及它們?cè)诮饘倨系膴A具中的最優位置。Krishnakumar和Melkote開發了一種夾具布局優化技術，它是利用遺傳算法找到了夾具布局，由于整個刀具路徑中的夾緊力和加工力使加工表面變形量最小化。通過節點編號使定位器和夾具位置特殊化。一個內置的有限元求解器研制成功。
一些研究沒考慮到整個刀具路徑的優化布局以及磨屑清除。一些研究采用節點編號作為設計參數。
在本研究中，開發GA工具用于尋找在二維工件中的最優定位器和夾緊位置。使用參考邊緣的距離作為設計參數而不是用FEA節點編號。真正編碼遺傳算法的染色體的健康指數是從FEA結果中獲得的。ANSSYS用于FEA計算。用染色體文庫的方法是為了減少解決問題的時間。用兩個問題測試已開發的遺傳算法工具。給出的兩個實例說明了這個開發的方法。本論文的主要貢獻可以概括為以下幾個方面：
（1） 開發了遺傳算法編碼結合商業有限元素求解；
（2） 遺傳算法采用染色體文庫以降低計算時間；
（3） 使用真正的設計參數，而不是有限元節點數字；
（4） 當工具在工件中移動時考慮磨屑清除工具。
3.遺傳算法概念
遺傳算法最初由John Holland開發。Goldberg出版了一本書，解釋了這個理論和遺傳算法應用實例的詳細說明。遺傳算法是一種隨機搜索方法，它模擬一些自然演化的機制。該算法用于種群設計。種群從一代到另一代演化，通過自然選擇逐漸提高了適應環境的能力，更健康的個體有更好的機會，將他們的特征傳給后代。
該算法中，要基于為每個設計計算適合性，所以人工選擇取代自然環境選擇。適應度值這個詞用來指明染色體生存幾率，它在本質上是該優化問題的目標函數。生物定義的特征染色體用代表設計變量的字符串中的數值代替。
被公認的遺傳算法與傳統的梯度基礎優化技術的不同主要有如下四種方式：
（1） 遺傳算法和問題中的一種編碼的設計變量和參數一起工作而不是實際參數本身。
（2） 遺傳算法使用種群—類型研究。評價在每個重復中的許多不同的設計要點而不是一個點順序移動到下一個。
（3） 遺傳算法僅僅需要一個適當?shù)幕蚰繕?biāo)函數值。沒有衍生品或梯度是必要的。
（4） 遺傳算法以用概率轉換規則來發現新設計為探索點而不是利用基于梯度信息的確定性規則來找到這些新觀點。
4.方法
4.1夾具定位原則
加工過程中，用夾具來保持工件處于一個穩定的操作位置。對于夾具最重要的標準是工件位置精確度和工件變形。一個良好的夾具設計使工件幾何和加工精度誤差最小化。另一個夾具設計的要求是夾具必須限制工件的變形?？紤]切削力以及夾緊力是很重要的。沒有足夠的夾具支撐，加工操作就不符合設計公差。有限元分析在解決這其中的一些問題時是一種很有力的工具。
棱柱形零件常見的定位方法是3-2-1方法。該方法具有最大剛體度以及最小夾具元件數。在三維中一個工件可能會通過六自由度定位方法快速定位為了限制工件的九個自由度。其他的三個自由度通過夾具元件消除了?；?-2-1定位原理的二位工件布局的例子如圖4。
圖4 3-2-1對二維棱柱工件定位布局
定位面得數量不得超過兩個避免冗余的位置?；?-2-1的夾具設計原則有兩種精確的定位平面包含于兩個或一個定位器。因此，在兩邊有最大的夾緊力抵抗每個定位平面。夾緊力總是指向定位器為了推動工件接觸到所有的定位器。定位點對面應定位夾緊點防止工件由于夾緊力而扭曲。因?yàn)榧庸ちρ刂庸っ妫杂斜匾_保定位器的反應力在所有時間內是正的。任何負面的反應力表示工件從夾具元件中脫離。換句話說，當反應力是負的時候，工件和夾具元件之間接觸或分離的損失可能發生。定位器內正的反應力確保工件從切削開始到結束都能接觸到所有的定位器。夾緊力應該充分束縛和定位工件且不導致工件的變形或損壞。本文不考慮夾緊力的優化。
4.2基于夾具布局優化方法的遺傳算法
在實際設計問題中，設計參數的數量可能很大并且它們對目標函數的影響會是非常復雜的。目標函數曲線必須是光滑的并且需要一個程序計算梯度。遺傳算法在理念上遠不同于其他的探究方法，它們包括傳統的優化方法和其他隨機方法。通過運用遺傳算法來對夾具優化布局，可以獲得一個或一組最優的解決方案。
本項研究中，最優定位器和夾具定位使用遺傳算法確定。它們是理想的適合夾具布局優化問題的方法因?yàn)闆]有直接分析的關系存在于加工誤差和夾具布局中。因?yàn)檫z傳算法僅僅為一個特別的夾具布局處理設計變量和目標函數值，所以不需要梯度或輔助信息。
建議方案流程圖如圖5。
使用開發的命名為GenFix的Delphi語言軟件來實現夾具布局優化。位移量用ANSYS軟件計算。通過WinExec功能在GenFix中運行ANSYS很簡單。GenFix和ANSYS之間相互作用通過四部實現：
（1） 定位器和夾具位置從二進制代碼字符串中提取作為真正的參數。
（2） 這些參數和ANSYS輸入批處理文件（建模、解決方案和后置處理）用WinExec功能傳給ANSYS。
（3） 解決后將位移值寫成一個文本文件。
（4） GenFix讀這個文件并為當前定位器和夾緊位置計算適應度值。
為了減少計算量，染色體與適應度值儲存在一個文庫里以備進一步評估。GenFix首先檢查是否當前的染色體的適應度值已經在之前被計算過。如果沒有，定位器位置被送到ANSYS，否則從文庫中取走適應度值。在初始種群產生過程中，檢查每一個染色體可行與否。如果違反了這個原則，它就會出局然后新的染色體就產生了。這個程序創造了可行的初始種群。這保證了初始種群的每個染色體在夾緊力和切削力作用下工件的穩定性。用兩個測試用例來驗證提到的遺傳算法計劃。第一個實例是使用Himmelblau功能。在第二個測試用例中，遺傳算法計劃用來優化均布載荷作用下梁的支撐位置。
圖5 設計方法的流程與ANSYS相配合流程
5.夾具布局優化的個案研究
該夾具布局優化問題的定義是：找到定位器和夾子的位置以使在特定區工件變形降到最小程度。那么多的定位器和夾子并不是設計參數因?yàn)樗鼈冊?-2-1方案中是已知的和固定的。因此，設計參數的選擇如同定位器和夾子的位置。本研究中不考慮摩擦力。兩個實例研究來說明以提出的方法。
6.結論
本文提出了一個夾具布局優化的評價優化技術。ANSYS用于FE計算適應度值?？梢钥吹剑z傳算法和FE方法的結合對當今此類問題似乎是一種強大的方法。遺傳算法特別適合應用于解決那些在目標函數和設計變量之間不存在一個定義明確的數學關系的問題。結果證明遺傳算法在夾具布局優化問題方面的成功應用。本項研究中，遺傳算法在夾具布局優化應用中的主要困難是較高的計算成本。種群中每個染色體需要工件的重嚙合。但是，染色體庫的使用，F(xiàn)E評價的數量從6000下降到415。這就導致了巨大的增益計算效益。其他減少處理時間的方法是在局域網內使用分布式計算。
該方法結果表明，夾具布局優化問題是多模態問題。優化設計之間沒有任何明顯的相似之處盡管他們提供非常相似的表現。結果表明夾具布局問題是多模態問題然而用于夾具設計的啟發式規則應該用于遺傳算法來選擇最優的設計。
MACHINING FIXTURE LOCATING AND CLAMPING POSITON OPTIMIZATION USING GENETIC ALGORITHMS
Abstract：Deformation of the workpiece may cause dimensional problems in machining. Supports and locators are used in order to reduce the error caused by elastic deformation of the workpiece. The optimization of support, locator and clamp locations is a critical problem to minimize the geometric error in workpiece machining. In this paper, the application of genetic algorithms (GAs) to the fixture layout optimization is presented to handle fixture layout optimization problem. A genetic algorithm based approach is developed to optimise fixture layout through integrating a finite element code running in batch mode to compute the objective function values for each generation. Case studies are given to illustrate the application of proposed approach. Chromosome library approach is used to decrease the total solution time. Developed GA keeps track of previously analyzed designs; therefore the numbers of function evaluations are decreased about 93%. The results of this approach show that the fixture layout optimization problems are multi-modal problems. Optimized designs do not have any apparent similarities although they provide very similar performances.
Keywords： Fixture design; Genetic algorithms; Optimization
1. Introduction
Fixtures are used to locate and constrain a workpiece during a machining operation, minimizing workpiece and fixture tooling deflections due to clamping and cutting forces are critical to ensuring accuracy of the machining operation. Traditionally, machining fixtures are designed and manufactured through trial-and-error, which prove to be both expensive and time-consuming to the manufacturing process. To ensure a workpiece is manufactured according to specified dimensions and tolerances, it must be appropriately located and clamped, making it imperative to develop tools that will eliminate costly and time-consuming trial-and-error designs. Proper workpiece location and fixture design are crucial to product quality in terms of precision, accuracy and finish of the machined part.
Theoretically, the 3-2-1 locating principle can satisfactorily locate all prismatic shaped workpieces. This method provides the maximum rigidity with the minimum number of fixture elements. To position a part from a kinematic point of view means constraining the six degrees of freedom of a free moving body (three translations and three rotations). Three supports are positioned below the part to establish the location of the workpiece on its vertical axis. Locators are placed on two peripheral edges and intended to establish the location of the workpiece on the x and y horizontal axes. Properly locating the workpiece in the fixture is vital to the overall accuracy and repeatability of the manufacturing process. Locators should be positioned as far apart as possible and should be placed on machined surfaces wherever possible. Supports are usually placed to encompass the center of gravity of a workpiece and positioned as far apart as possible to maintain its stability. The primary responsibility of a clamp in fixture is to secure the part against the locators and supports. Clamps should not be expected to resist the cutting forces generated in the machining operation.
For a given number of fixture elements, the machining fixture synthesis problem is the finding optimal layout or positions of the fixture elements around the workpiece. In this paper, a method for fixture layout optimization using genetic algorithms is presented. The optimization objective is to search for a 2D fixture layout that minimizes the maximum elastic deformation at different locations of the workpiece. ANSYS program has been used for calculating the deflection of the part under clamping and cutting forces. Two case studies are given to illustrate the proposed approach.
2. Review of related works
Fixture design has received considerable attention in recent years. However, little attention has been focused on the optimum fixture layout design. Menassa and DeVries[1]used FEA for calculating deflections using the minimization of the workpiece deflection at selected points as the design criterion. The design problem was to determine the position of supports. Meyer and Liou[2] presented an approach that uses linear programming technique to synthesize fixtures for dynamic machining conditions. Solution for the minimum clamping forces and locator forces is given. Li and Melkote[3]used a nonlinear programming method to solve the layout optimization problem. The method minimizes workpiece location errors due to localized elastic deformation of the workpiece. Roy andLiao[4]developed a heuristic method to plan for the best supporting and clamping positions. Tao et al.[5]presented a geometrical reasoning methodology for determining the optimal clamping points and clamping sequence for arbitrarily shaped workpieces. Liao and Hu[6]presented a system for fixture configuration analysis based on a dynamic model which analyses the fixture–workpiece system subject to time-varying machining loads. The influence of clamping placement is also investigated. Li and Melkote[7]presented a fixture layout and clamping force optimal synthesis approach that accounts for workpiece dynamics during machining. A combined fixture layout and clamping force optimization procedure presented.They used the contact elasticity modeling method that accounts for the influence of workpiece rigid body dynamics during machining. Amaral et al. [8] used ANSYS to verify fixture design integrity. They employed 3-2-1 method. The optimization analysis is performed in ANSYS. Tan et al. [9] described the modeling, analysis and verification of optimal fixturing configurations by the methods of force closure, optimization and finite element modeling.
Most of the above studies use linear or nonlinear programming methods which often do not give global optimum solution. All of the fixture layout optimization procedures start with an initial feasible layout. Solutions from these methods are depending on the initial fixture layout. They do not consider the fixture layout optimization on overall workpiece deformation.
The GAs has been proven to be useful technique in solving optimization problems in engineering [10–12]. Fixture design has a large solution space and requires a search tool to find the best design. Few researchers have used the GAs for fixture design and fixture layout problems. Kumar et al. [13] have applied both GAs and neural networks for designing a fixture. Marcelin [14] has used GAs to the optimization of support positions. Vallapuzha et al. [15] presented GA based optimization method that uses spatial coordinates to represent the locations of fixture elements. Fixture layout optimization procedure was implemented using MATLAB and the genetic algorithm toolbox. HYPERMESH and MSC/NASTRAN were used for FE model. Vallapuzha et al. [16] presented results of an extensive investigation into the relative effectiveness of various optimization methods. They showed that continuous GA yielded the best quality solutions. Li and Shiu [17] determined the optimal fixture configuration design for sheet metal assembly using GA. MSC/NASTRAN has been used for fitness evaluation. Liao [18] presented a method to automatically select the optimal numbers of locators and clamps as well as their optimal positions in sheet metal assembly fixtures. Krishnakumar and Melkote [19] developed a fixture layout optimization technique that uses the GA to find the fixture layout that minimizes the deformation of the machined surface due to clamping and machining forces over the entire tool path. Locator and clamp positions are specified by node numbers. A built-in finite element solver was developed.
Some of the studies do not consider the optimization of the layout for entire tool path and chip removal is not taken into account. Some of the studies used node numbers as design parameters.
In this study, a GA tool has been developed to find the optimal locator and clamp positions in 2D workpiece. Distances from the reference edges as design parameters are used rather than FEA node numbers. Fitness values of real encoded GA chromosomes are obtained from the results of FEA. ANSYS has been used for FEA calculations. A chromosome library approach is used in order to decrease the solution time. Developed GA tool is tested on two test problems. Two case studies are given to illustrate the developed approach. Main contributions of this paper can be summarized as follows:
(1) developed a GA code integrated with a commercial finite element solver;
(2) GA uses chromosome library in order to decrease the computation time;
(3) real design parameters are used rather than FEA node numbers;
(4) chip removal is taken into account while tool forces moving on the workpiece.
3. Genetic algorithm concepts
Genetic algorithms were first developed by John Holland. Goldberg [10] published a book explaining the theory and application examples of genetic algorithm in details. A genetic algorithm is a random search technique that mimics some mechanisms of natural evolution. The algorithm works on a population of designs. The population evolves from generation to generation, gradually improving its adaptation to the environment through natural selection; fitter individuals have better chances of transmitting their characteristics to later generations.
In the algorithm, the selection of the natural environment is replaced by artificial selection based on a computed fitness for each design. The term fitness is used to designate the chromosome’s chances of survival and it is essentially the objective function of the optimization problem. The chromosomes that define characteristics of biological beings are replaced by strings of numerical values representing the design variables.
GA is recognized to be different than traditional gradient based optimization techniques in the following four major ways [10]:
1. GAs work with a coding of the design variables and parameters in the problem, rather than with the actual parameters themselves.
2. GAs makes use of population-type search. Many different design points are evaluated during each iteration instead of sequentially moving from one point to the next.
3. GAs needs only a fitness or objective function value. No derivatives or gradients are necessary.
4. GAs use probabilistic transition rules to find new design points for exploration rather than using deterministic rules based on gradient information to find these new points.
4. Approach
4.1. Fixture positioning principles
In machining process, fixtures are used to keep workpieces in a desirable position for operations. The most important criteria for fixturing are workpiece position accuracy and workpiece deformation. A good fixture design minimizes workpiece geometric and machining accuracy errors. Another fixturing requirement is that the fixture must limit deformation of the workpiece. It is important to consider the cutting forces as well as the clamping forces. Without adequate fixture support, machining operations do not conform to designed tolerances. Finite element analysis is a powerful tool in the resolution of some of these problems [22].
Common locating method for prismatic parts is 3-2-1 method. This method provides the maximum rigidity with the minimum number of fixture elements. A workpiece in 3D may be positively located by means of six points positioned so that they restrict nine degrees of freedom of the workpiece. The other three degrees of freedom are removed by clamp elements. An example layout for 2D workpiece based 3-2-1 locating principle is shown in Fig. 4.
Fig. 4. 3-2-1 locating layout for 2D prismatic workpiece
The number of locating faces must not exceed two so as to avoid a redundant location. Based on the 3-2-1 fixturing principle there are two locating planes for accurate location containing two and one locators. Therefore, there are maximum of two side clampings against each locating plane. Clamping forces are always directed towards the locators in order to force the workpiece to contact all locators. The clamping point should be positioned opposite the positioning points to prevent the workpiece from being distorted by the clamping force.
Since the machining forces travel along the machining area, it is necessary to ensure that the reaction forces at locators are positive for all the time. Any negative reaction force indicates that the workpiece is free from fixture elements. In other words, loss of contact or the separation between the workpiece and fixture element might happen when the reaction force is negative. Positive reaction forces at the locators ensure that the workpiece maintains contact with all the locators from the beginning of the cut to the end. The clamping forces should be just sufficient to constrain and locate the workpiece without causing distortion or damage to the workpiece. Clamping force optimization is not considered in this paper.
4.2. Genetic algorithm based fixture layout optimization approach
In real design problems, the number of design parameters can be very large and their influence on the objective function can be very complicated. The objective function must be smooth and a procedure is needed to compute gradients. Genetic algorithms strongly differ in conception from other search methods, including traditional optimization methods and other stochastic methods [23]. By applying GAs to fixture layout optimization, an optimal or group of sub-optimal solutions can be obtained.
In this study, optimum locator and clamp positions are determined using genetic algorithms. They are ideally suited for the fixture layout optimization problem since no direct analytical relationship exists between the machining error and the fixture layout. Since the GA deals with only the design variables and objective function value for a particular fixture layout, no gradient or auxiliary information is needed [19].
The flowchart of the proposed approach is given in Fig. 5.
Fixture layout optimization is implemented using developed software written in Delphi language named GenFix. Displacement values are calculated in ANSYS software [24]. The execution of ANSYS in GenFix is simply done by WinExec