鼠標上蓋注塑模具設計與仿真加工

鼠標上蓋注塑模具設計與仿真加工,鼠標,注塑,模具設計,仿真,加工 鼠標上蓋注塑模具設計與仿真加工 摘要 本課題采用 Pro E 以及 EMX 軟件對鼠標上蓋制品進行了零件造型及其模 具設計 綜合運用了注塑成形工藝與注塑模具設計的相關知識 從材料 厚度 均勻性 脫模角和各成型面等方面分析了該零件的注塑成形性 根據零件體積 和模具裝配尺寸選擇注射成形設備 在綜合考慮生產批量 生產效率 精度要 求等問題的基礎上 制定了零件的成形工藝方案 進行了注塑?？傮w結構和零 部件設計 繪制了模具裝配圖 關鍵詞 注塑模具 鼠標上蓋 Pro E EMX devise of plastic cap injection mold and simulation machining on mouse Abstract The subject used Pro E and EMX software products for the mouse covers parts of the modeling and mold design Synthetically utilized the related knowledge of injection process and injection mould design the mould of a back cover of a lap top was designed Considerating material thickness uniformity ejection angle and pating surface the injection performance of this part was analysised based on synthetically considerating the injection procedure requests product lot productivity precision requests the process plan was established the injection mould structure and the entire mould parts were designed the mould assembly drawing and the parts drawings of the main parts were drew According to the volume of the part and the assembly size of the mould injection machine was selected KeyWords Injection mold The top cover of mouse Pro E EMX 目 錄 1 序言 1 1 1選題依據 1 1 2 國內外研究概括及發展趨勢 2 1 3研究?jī)?nèi)容及實驗方案 8 1 4 目標 主要特色 8 2 鼠標上蓋的三維建模 10 3 模具設計 14 3 1概述 14 3 2型腔數目的確定 14 3 3注射模澆注系統設計 15 3 4 注塑模凹凸模設計 18 3 5 注射模的導向及脫模機構設計 20 3 6 模架的選取 23 3 7 冷卻系統的設計 24 4 鼠標上蓋的 NC仿真加工 25 結 語 44 參考文獻 44 致 謝 46 附錄 模具裝配圖