畢 業 設 計 （ 論 文 ）年 5 月 26 日外文翻譯學 生 姓 名班 級學 號學 院 名 稱專 業 名 稱指 導 教 師8th Annual International Conference on Biologically Inspired Cognitive Architectures, BICA 2017 The Control System Based on Extended BCI for a Robotic WheelchairTimofei I. Voznenko_, Eugene V. Chepin?, and Gleb A. Urvanov National Research Nuclear University MEPhI (Moscow Engineering Physics Institute) Moscow, Russia Abstract In most cases, the movement of wheelchairs is controlled by disabled people using a joystick or by an accompanying person. Significantly disabled patients need alternative control methods without using the wheelchair joystick because it is undesirable or impossible for these patients. In this article, we present the implementation of a robotic wheelchair based on a powered wheelchair that is controlled not by the joystick but by the onboard computer that receives and processes data from the extended brain-computer interface (extended BCI). Under this term we understand the robotic complex control system with simultaneous independent alternative control channels. In this robotic wheelchair version the BCI works with voice and gesture control channels. Keywords: extended brain-computer interface, robotic wheelchair, control channel, robotics 1 Introduction Technical projects on the development of robotic wheelchairs have been carried out since the last century. Modern mobile robotic complexes (MR) which include robotic wheelchairs are complex heterogeneous hardware and software systems and they should provide a certain level of comfort and reliability of control answering the fields of their application. Under the term MR we understand the robotic system having an onboard powerful, versatile, and inexpensive miniature computer with a modern CPU providing the ability to connect the modern peripherals to the system without any restrictions, unlike the microcontroller capabilities. Because of this, it is possible to use the maximum possible set of software, more memory and parallel programming techniques to achieve the real-time mode (RTM).The robotic wheelchair (hereinafter the “chair”) is designed for patients with severe disorders of the musculoskeletal system and other functions of the body (hands, speech, hearing, etc.). The patient is the operator of the chair sitting in it and controlling it via the control system. For clarity we will call them the “patient”. Along with it, the chair is controlled by the specialistoperator who can remotely monitor the chair. This is possible because of a parallel chair-control channel provided by the Wi-Fi connection of the onboard computer with a remote Tracking and Control Station (TCS). TCS is a remote computer through which the specialist-operator can control the chair “intercepting”, if necessary, the control from the patient-operator.2 Related WorksThe patients who use the wheelchairs in most cases are quite satisfied with them, if the chair is equipped with an electric drive and control system via the joystick. An example of such a robotic wheelchair called Wheelesley is described by Yanco [1]. This chair provides additional opportunities for the patient during the driving by the provision of the information “with a lower level of navigation”.One of the modern trends in the development of the robotic wheelchairs is the projects such as the Chinese project Chiba (Robotic wheelchair) described by Morales et al. [2] and Szondy [3]. The main objective of these projects is the control system of the mechatronics of the chair which effectively overcomes the obstacles in the way such as stairs and border stones. However, some patients are unable to control the chair with such functions. Therefore, for these patients the way to improve the quality of their lives is the development of the control systems for the robotic wheelchairs that would allow them to control their own wheelchair using their modest possibilities: weak hands, voice, etc.There is a great variety of the ways to control the MR. The most common is to control directly by the joystick as described by Jawawi et al. [4]. However, the directly connected to the servomotor of the joystick Arduino opens the opportunity of controlling the chair using such methods as the brain-computer interface (BCI), voice or gesture control. Each MR has onboard a powerful general-purpose computer. It interacts during the operation with the external computing unit — Tracking and Control Station (TCS). The TCS allows to carry out the remote control of the MR’s work by the operator. Also, it is possible to send to the TCS the data to gather the statistics on the basis of which it is possible to make the changes in the values of the parameters to improve the quality of the MR’s control. The global problem of increasing the intelligence of such complex systems is extremely relevant nowadays, especially in the transition to the control of the teams of robots, for example proposed by Bereznyak et al. [5]. For some applications of the MRs their control circuit includes a human-operator. For example, in medicine it is extremely important to implement the control system based on the traditional paradigm of “control commands”, but on the basis of non-traditional methods of controlling the complex systems. There are several works describing BCI-controlled wheelchairs but the control accuracy is not high enough for reliable control, for example, 50% and above described by Ng et al. [6] and 79.38% presented by Achic et al. [7]. In order to increase the control accuracy of BCI-controlled robotic wheelchair we propose using of other control channels like voice commands or gestures. In this project, we proposed the new non-traditional control method we called “extended BCI”, which involves the operation of three control channels in parallel: voice commands, gestures and the BCI. The urgency and necessity of this control method is determined by the field of its application: medical robotics.3 Theory 3.1 The Nontraditional Methods of MR Control Under the traditional method of MRs control we understand the way to control using the commands passed from the operator to the MR’s control system via some interface. Under the non-traditional control methods we understand in this article the following: BCI, voice control, control with gestures. The BCI is an interface that provides a direct transmission of the information from the brain to the computing device as described by Tromov and Skrugin [8]. Recently different companies has developed the portable BCI such as NeuroSky, MindFlex, Emotiv, as described by Stamps and Hamam [9]. Some of these neurocomputing interfaces allows not only to obtain the EEG (electroencephalogram) data, but also to obtain data about the emotional state of the operator, for example used by Chepin et al. [10] and Voznenko et al. [11]. The voice control is a way of interaction between a man and a computer by the voice. This method of control is based on the processing of audio signals coming from a microphone. Speech recognition system using phonemes and grammar follows Lamere et al. [12]. The gesture recognition system was developed by Chistjakov et al. [13] in the “Robotics” laboratory of the NRNU MEPhI. The algorithm determines the fact of the hand getting in the graphics region (specified area) corresponding to a particular gesture. This system is installed into the wheelchair to control its movement by the hand gestures and finger movements of the patient. 3.2 Extended BCI The main scientific and engineering idea of the described project is the development of the control system. The general ideology of the project is based on the concept of “extended BCI” proposed by Tromov and Skrugin [8], Dyumin et al. [14], Chepin et al. [15] and Urvanov et al. [16], by which we mean the presence in the control system the following robot-control channels: BCI, voice control, control with gestures.The term “extended BCI” was introduced in order to emphasize that in addition to the control channel based on the parallel BCI there are other ones, not so common channels. BCI is the main control method, but in practice there are situations when a particular patient more effectively controls the wheelchair using the voice commands and/or gestures. With this approach, it is necessary to solve the problem of choosing the most correct control channel. In addition, the architecture should implement the possibility of taking into account the disease peculiarities of the particular patient and develop a decision-making mechanism based on the analysis of the information from all control channels. 3.3 The Task of Decision-Making The concept of “extended interface” includes several different control channels of the MR by the operator. The general scheme of the decision-making system based on the data from the extended BCI interface is presented in Figure 1. When using more than one data channel to control the MR it is needed to solve the problem of the decision-making. In general, the problem looks as follows: there are several control channels and it is necessary to decide what command should be executed at a given time. The decision-making system should have the following features: 1. To be deterministic. If we know the specificity of working with the extended BCI-interface system components it is possible to make the deterministic decision-making system taking into account the mentioned features of the components. 2. The ability to have the varying credibility degree for the control system channels . Since the channels have different degree of credibility, it is logical that the information coming to the decision-making system should have the different values. 3. Support an asynchronous data input. Despite the fact that the part of the data is received synchronously and during a long period of time, the solutions based on asynchronously incoming information having a greater relative value should be taken timely. 4. Work with continuous processes. For example, when working with thought-images it is important to record not only the state but also the dynamic characteristics of the process, and the previous state. Thus, the developed method of decision-making should be similar to the automaton with a memory. The decision-making system prototype satisfying all requirements was implemented using channels accuracy based priority accounting.Figure 1: General problem statement4 ImplementationThe current “chair” hardware-software complex consists of:1. The wheelchair with the electric drive “Titan” LY-103-120, which is designed for the independent movement in the premises and on roads with hard-surface for the disabled people with diseases of the musculoskeletal system and injuries of the lower extremities (Figure 2a). Instead of joystick control the chair has a control unit, which has an interface with the onboard computer port.2. The neural interface on the basis of the Emotiv Epoc (Figure 2b) and the software module. The Emotiv Epoc BCI allows one to obtain information not only about the fact that the user thought about the thought-images, but also the quantitative assessment of this fact (power).Channel 1Channel 2Channel 3Channel N。 。 。 。 。 。 。DecisionMakingSystemControlSignalb)a) c)Figure 2: a) The “chair”, b) BCI Epoc Emotiv, c) Intel RealSense3. The basic equipment for the operator video interface with the robot for the development of a system of gesture recognition (a stereo camera for fixing the movements and gestures of the operator and the set of individual cameras). The arm tracking is made using an Intel RealSense camera that is shown in Figure 2c. 4. The basic equipment for the operator audio interface with the chair. The voice recognition takes place with the help of English phonetics of the Sphinx-4 library developed by Lamere et al. [12]. The dictionary consists of the words matched the available phonetics 5 Results and Conclusion The “chair” project has received quite a wide coverage in Russian and the foreign mass-media: a few reports on some Russian TV-channels, in particular, on the NTV [17], as well as in the press of Spain and Spanish-speaking countries, for example in El Diario de Hoy [18], El Universal [19] and in China (Science and Technology Daily [20]). Acknowledgments We would like to thank the RFBR for support of this project by the grant No. 14-07-00843 — “The intelligent robotic wheelchair”. References [1] H. A. Yanco. Wheelesley: A robotic wheelchair system: Indoor navigation and user interface. In Assistive technology and artificial intelligence, pages 256–268. Springer, 1998.[2] R. Morales, A. Gonzalez, V. Feliu, and P. Pintado. Environment adaptation of a new staircase-climbing wheelchair. Autonomous Robots, 23(4):275–292, 2007.[3] D. Szondy. Chiba robotic wheelchair turns wheels into legs. Gizmag, October 17, 2012, www.gizmag.com, 2012. [4] D. N. Jawawi, K. Kamal, M. A. S. Talab, M. Z. M. Zaki, N. M. Hamdan, R. Mohamad, R. Mamat, and S. Sabil. A Robotic Wheelchair Component-Based Software Development. INTECH Open Access Publisher, 2011. 5 [5] I. S. Bereznyak, E. V. Chepin, and A. A. Dyumin. The actions language as a programming frame-work for cloud robotics applications. In Cloud System and Big Data Engineering (Confluence), 2016 6th International Conference, pages 119–124. IEEE, 2016. [6] D. W. K. Ng, Y. W. Soh, and S. Y. Goh. Development of an autonomous bci wheelchair. In Computational Intelligence in Brain Computer Interfaces (CIBCI), 2014 IEEE Symposium on, pages 1–4. IEEE, 2014.[7] F. Achic, J. Montero, C. Penaloza, and F. Cuellar. Hybrid bci system to operate an electric wheelchair and a robotic arm for navigation and manipulation tasks. In Advanced Robotics and its Social Impacts (ARSO), 2016 IEEE Workshop on, pages 249–254. IEEE, 2016. [8] A. G. Trofimov and V. I. Skrugin. Brain-computer interfaces. review. Information Technologies, (2):2–11, 2011. [9] K. Stamps and Y. Hamam. Towards inexpensive bci control for wheelchair navigation in the enabled environment–a hardware survey. In International Conference on Brain Informatics, pages 336–345. Springer, 2010. [10] E. V. Chepin, A. A. Dyumin, G. A. Urvanov, and T. I. Voznenko. The improved method for robotic devices control with operator’s emotions detection. In NW Russia Young Researchers in Electrical and Electronic Engineering Conference (EIConRusNW), 2016 IEEE, pages 173–176. IEEE, 2016.[11] T. I. Voznenko, G. A. Urvanov, A. A. Dyumin, S. V. Andrianova, and E. V. Chepin. The research of emotional state influence on quality of a brain-computer interface usage. Procedia Computer Science, 88:391–396, 2016.[12] P. Lamere, P. Kwok, E. Gouvea, B. Raj, R. Singh, W. Walker, M. Warmuth, and P. Wolf. The cmu sphinx-4 speech recognition system. In IEEE Intl. Conf. on Acoustics, Speech and Signal Processing (ICASSP 2003), Hong Kong, volume 1, pages 2–5, 2003. [13] I. S. Chistjakov, G. A. Urvanov, D. V. Bajkov, and E. V. Chepin. Sistema upravlenija robo-tizirovannym kreslom pri pomoshhi zhestov (the system of control robotic wheelchair using ges-tures). Vestnik natsional’nogo issledovatel’skogo yadernogo universiteta “MIFI”, 5(4):381–388, 2016.[14] A. A. Dyumin, P. S. Sorokoumov, E. V. Chepin, and G. A. Urvanov. Architecture and prototype of human-machine interface with mobile robotic device. Vestnik natsional’nogo issledovatel’skogo yadernogo universiteta “MIFI”, 2(3):376–380, 2013. [15] E. V. Chepin, A. A. Dyumin, P. S. Sorokoumov, and G. A. Urvanov. A prototype of the brain-computer interface for mobile robot. In The 15th International Workshop on Computer Science and Information Technologies (CSIT 2013), volume 2, pages 202–206. CSIT, 2013.[16] G. A. Urvanov, V. V. Dan’shin, A. A. Dyumin, and Chepin E. V. The system of human interaction as an agent of mobile robotic system. Software systems and computational methods, (1):45–51, 2015. [17] V moskve ispytali invalidnoe kreslo, upravljaemoe siloj mysli (in moscow was experienced a wheelchair controlled by thought). http://www.ntv.ru/novosti/1604180/, 2016. [18] La silla de ruedas del futuro ser′a guiada por el pensamiento y las emociones (the wheelchair of the future will be guided by thought and emotions). http://www.elsalvador.com/articulo/internacional/ silla-ruedas-del-futuro-sera-guiada-por-pensamiento-las-emociones-109909, 2016. [19] La silla de ruedas del futuro ser′a guiada por el pensamiento (the wheelchair of the fu-ture will be guided by thought). http://www.eluniversal.com/noticias/estilo-vida/ silla-ruedas-del-futuro-sera-guiada-por-pensamiento_305388, 2016. [20] Invalidnoe kreslo, upravljaemoe siloj mysli (wheelchair controlled by thought). http://inosmi. ru/science/20160617/236896139.html, 2016.第 8屆國際生物認知架構年會，BICA 2017。擴展 BCI的機器人輪椅控制系統提莫菲·沃斯納科奇，尤金·v·切平，以及格列布·烏爾瓦諾夫國家研究核能大學(莫斯科工程物理研究所)莫斯科，俄羅斯。摘要在大多數情況下，輪椅的運動是由殘疾人用操縱桿或陪同人員控制的。嚴重殘疾的患者不需要使用輪椅操縱桿就需要其他的控制方法，因為對這些患者來說是不可取的或不可能的。在這篇文章中，我們介紹了一個基于電動輪椅的機器人輪椅的實現，它不是由操縱桿控制的，而是由機載計算機接收和處理來自擴展腦機接口(擴展 BCI)的數據。在這一術語下，我們了解機器人復雜的控制系統，同時擁有獨立的可選控制通道。在這個機器人輪椅版本的 BCI 工作與聲音和手勢控制頻道。關鍵詞:擴展腦機接口，機器人輪椅，控制通道，機器人。1介紹自上個世紀以來，機器人輪椅的發展技術項目一直在進行。包括機器人輪椅的現代移動機器人復合體(MR)是復雜的異構硬件和軟件系統，它們應該提供一定程度的舒適性和可靠性，以滿足其應用領域的需求。在這個術語中，MR .我們理解機器人系統擁有一個強大的、多功能的、便宜的微型計算機，它具有現代的 CPU，它提供了將現代外圍設備連接到系統的能力，而不受任何限制，不像微控制器的功能。因此，可以使用最大可能的軟件集、更多的內存和并行編程技術來實現實時模式(RTM)。機器人輪椅(下稱“椅”)是為肌肉骨骼系統的嚴重疾病和身體的其他功能(手、說話、聽力等)的病人設計的。病人是坐在椅子上的椅子的操作員，通過控制系統控制它。為了清晰起見，我們稱他們?yōu)椤安∪恕?。與此同時，這把椅子由專門的操作員控制，他們可以遠程監控椅子。這是可能的，因為由機載計算機的 Wi-Fi 連接提供的一個平行的座椅控制通道與一個遠程跟蹤和控制站(TCS)。TCS 是一種遠程計算機，通過它，專家操作人員可以控制椅子“攔截” ，必要時可以控制來自患者的控制。2相關的工作在大多數情況下病人對他們使用的輪椅感到非常滿意，椅子的操縱桿安裝了一個電力驅動和控制系統。Yanco[1]描述了一個叫做 Wheelesley 的機器人輪椅的例子。這張椅子為病人提供了額外的機會，在駕駛過程中提供信息“有較低水平的導航” 。機器人輪椅發展的現代趨勢之一是由 Morales 等[2]和 Szondy[3]所描述的中國項目 Chiba(機器人輪椅)等項目。這些項目的主要目標是控制系統的機電一體化的椅子，有效克服了障礙，如樓梯和邊界石。然而，有些患者無法控制這類功能的椅子。因此，對于這些患者來說，改善他們生活質量的方法是開發出機器人輪椅的控制系統，這樣他們就可以用他們有限的可能性來控制自己的輪椅:軟弱的手、聲音等等。有很多方法可以控制最常見的是由 Jawawi 等[4]所描述的操縱桿直接控制。然而，與操縱桿 Arduino 的伺服馬達直接相連的是利用腦-機接口(BCI)、聲音或手勢控制等方法來控制椅子的機會。每個人都有一臺功能強大的通用計算機。它在操作過程中與外部計算單元-跟蹤和控制站(TCS)進行交互。TCS 允許操作員對 MR 的工作進行遠程控制。此外，還可以將數據發送到 TCS，以收集統計數據，根據這些數據，可以對參數的值進行更改，以提高 MR 控制的質量。目前，增加這種復雜系統的智能的全球問題是極其相關的，特別是在由Bereznyak 等人提出的關于機器人團隊控制的過渡中。[5]。對于一些應用，他們的控制電路包括一個人操作員。例如，在醫學上，以傳統的“控制指令”范式為基礎實現控制系統是極其重要的，但在控制復雜系統的非傳統方法的基礎上。有幾幅作品描述了 bci 控制的輪椅，但控制精度不夠高，無法可靠控制，例如，Ng 等人所描述的 50%以上，Achic 等[7]提出的 79.38%。為了提高 bci 控制機器人輪椅的控制精度，我們建議使用語音命令或手勢等其他控制通道。在這個項目中，我們提出了一種新的非傳統的控制方法，我們稱之為“擴展 BCI”，它包括三個控制通道并行的操作:語音指令、手勢和BCI。這種控制方法的緊迫性和必要性是由其應用領域所決定的:醫用機器人。3理論3.1 MR控制的非傳統方法。在傳統的控制方法中，我們理解了通過一些接口將命令從操作符傳遞到 MR的控制系統的方法。在本文中我們理解的非傳統控制方法如下:BCI，語音控制，手勢控制。BCI 是一個接口，它提供從大腦到計算機設備的信息的直接傳輸[8]。最近，不同的公司開發了像 NeuroSky, MindFlex, Emotiv 這樣的便攜式 BCI[9]。其中一些神經計算接口不僅可以獲得 EEG(腦電圖)數據，還可以獲得關于操作者情緒狀態的數據，例如 Chepin 等[10]和 Voznenko 等[11]。語音控制是一種人與計算機之間通過聲音進行交互的一種方式。這種控制方法是基于對來自麥克風的音頻信號的處理。語音識別系統使用音素和語法，[12]。這個手勢識別系統是由 Chistjakov 等人在 NRNU MEPhI 的“機器人”實驗室開發的。該算法決定了在圖形區域(指定區域)與特定手勢對應的手的實際情況。這個系統安裝在輪椅上，通過病人的手勢和手指的移動來控制它的運動。3.2擴展 BCI所述項目的主要科學和工程思想是控制系統的開發。項目的一般意識形態概念的基礎上提出的“擴展 BCI Tromov 和 Skrugin[8],Dyumin et al。[14],Chepin 等。[15]和 Urvanov et al。[16],我們指的是在控制系統的以下機器人控制渠道:BCI,語音控制,控制手勢?！皵U展 BCI”一詞是為了強調除了基于并行 BCI 的控制信道之外，還有其他的信道。BCI 是主要的控制方法，但在實踐中，當某一特定的患者使用語音指令和/或手勢更有效地控制輪椅時，就會出現這種情況。采用這種方法，有必要解決選擇最正確的控制信道的問題。此外，該體系結構還應實現考慮到特定患者的疾病特性的可能性，并在分析所有控制渠道的信息的基礎上制定決策機制。3.3決策的任務。“擴展接口”的概念包括操作人員對 MR 的幾個不同的控制通道?；跀U展BCI 接口數據的決策系統總體方案如圖 1 所示。當使用多個數據通道來控制 MR時，需要解決決策問題。一般來說，問題是這樣的:有幾個控制通道，需要決定在給定的時間執行什么命令。決策系統應具備以下特點:1.如果我們知道使用擴展的 bci 接口系統組件的特性，就可以考慮到組件的上述特性，從而做出確定性決策系統。2.對控制系統信道具有不同可信度的能力。由于渠道具有不同程度的可信度，進入決策系統的信息應該具有不同的價值是合乎邏輯的。3. 支持異步數據輸入。盡管數據的部分是同步接收的，而且在很長一段時間內，基于異步傳入信息的解決方案具有更大的相對價值。4. 使用連續的過程。例如，在處理思想圖像時，不僅要記錄狀態，還要記錄進程的動態特性和前一個狀態。因此，開發的決策方法應該類似于具有內存的自動機。采用基于信道精度的優先級會計實現了滿足所有需求的決策系統原型。圖 1:一般問題陳述通道 1通道 2通道 3通道 N。 。 。 。 。 。 。決定制造系統控制信號4實現當前的“椅子”硬件軟件復雜包括:1. “Titan”-103-120 電動輪椅，其設計用于在建筑物內和道路上的獨立運動，為殘障人士的肌肉骨骼系統疾病和下肢的損傷(圖 2a)。而不是操縱桿控制，椅子有一個控制單元，它有一個接口與機載計算機端口。2. 基于 Emotiv Epoc(圖 2b)和軟件模塊的神經接口。Emotiv Epoc BCI 允許人們獲取信息，不僅是關于用戶對思想圖像的思考，還包括對這個事實(權力)的定量評估。3. 操作人員視頻接口的基本設備，用于開發一個手勢識別系統(用于固定操作人員的動作和手勢的立體攝像機和單個攝像頭的集合)。arm 跟蹤是使用英特爾的 RealSense 攝像機拍攝的，如圖 2c 所示。4. 操作人員音頻接口的基本設備