壓縮包內含有CAD圖紙和說明書,均可直接下載獲得文件，所見所得，電腦查看更方便。Q 197216396 或 11970985
機電工程學院
畢業設計外文資料翻譯
設計題目: ZY1160貨車底盤總體及車架設計
譯文題目: 汽車工程學I：汽車縱向動力學
學生姓名：
學 號：
專業班級：
指導教師：
正文：外文資料譯文 附 件：外文資料原文
指導教師評語：
簽名： 年 月 日
25
正文：（選自《汽車工程學Ⅰ：汽車縱向動力學》P111--122 ）
變速器
3.4.1.2 變速器設計
機械有級式變速器被分成兩類：
1）雙軸式變速器
2）周轉式變速器（行星齒輪變速器）
雙軸式變速器又被稱為中間軸變速器，這是適用于所有傳統有級式變速器的通用術語。在這種變速器中。在這種變速器中，非直齒輪之間的轉矩傳遞發生在兩個平行軸上相互嚙合的齒輪對。
前進擋的直齒輪對是常嚙合的。這個齒輪對是由一個與軸固定在一起齒輪與一個空套在軸上的齒輪組成。后者是在第二軸上并且可以自由旋轉但是不能軸向移動。同步器可以按照各個不同要求使空轉的齒輪對與軸相連進行傳動。
雙軸式變速器可以根據輸入和輸出軸的安裝位置被分為：
1）共軸雙軸變速器
2）非共軸雙軸變速器
（1）共軸雙軸變速器 對于傳統驅動形式（發動機前置后驅）的車輛，這種雙軸有級式變速器被廣泛的采用。這種設計的顯著特點是可以把輸出軸與輸入軸直接相連進行傳動。剩余的能量齒輪對間的能量傳遞是通過中間軸進行的（圖3-52）。
圖3-52 共軸式雙軸變速器的能量傳遞路線及其布置
（來源：電機專用驅動系統）
一般來言，共軸的中間軸變速器直接與離合器總成裝配在一起。輸出轉矩通過傳動軸進行傳遞。這將導致不合理的軸荷分配。正是這樣的原因在有些車輛上將變速器安裝在后軸附近（驅動橋設計).傳動軸的轉速與發動機發動機的轉速一致。
圖3-53展示了一種客車上使用用的共軸的五擋變速器。
圖3-53 五擋手動變速器（福特）
圖3-54 非共軸式雙軸變速器的能量傳遞路線及其布置
（ 來源：電機專用驅動系統 ）
圖3-55 非共軸五擋手動變速器（薩博）
（2）非共軸的雙軸變速器 這種雙軸變速器被用于發動機前置前驅或者發動機后置后驅的車輛，這種變速器的輸入輸出軸常常被安置在變速器的同一邊?？拷敵鲚S的是差速器，差速器是集成在變速器殼上的。這種變速器的動力傳遞路線如圖3-54所示。每個擋位中，動力傳遞是通過一對嚙合的齒輪對進行的。這種變速器對于前輪驅動的車輛來言是不合適的因為曲軸與輸入軸之間的軸向移動必須被橋接。
圖3-55展示前輪驅動且發動機橫置的汽車的非共軸式雙軸變速器的實例。
3）換擋機構 在雙軸變速器中是通過適當?shù)碾x合機構來進行換擋的。在這種情況下，有一些不同：
1) 同步器
2）粘附換擋離合器
在手動變速器中換擋是通過換擋桿進行操作的。在換擋的時候，換擋齒輪和軸的同步時間是確定的，齒輪和軸的速度必須是相同的。這種無同步器換擋的方法曾經被用了很長時間，這是通過駕駛員兩次的離合操作來實現速度的同步的。對于無同步器的變速器來言選擇正確的換擋時機是需要一定技巧的。這就導致了現在這種換擋方式僅僅被應用在一些卡車上。在有級式變速器的前進擋中是通過摩擦部件來保證齒輪軸向移動過程中旋轉部件速度的同步來實現操作的方便和快捷以及低噪聲和少磨損的目的的。
圖3-56 博格華納系統單錐同步器（ZF）
1---在滾針軸承支持下空轉的惰齒輪 2---有摩擦錐面的結合齒圈
3---主要功能元件，有反錐面的摩擦面及起鎖止作用的齒的鎖環。
4---能夠使變速器軸與結合套相互聯系一起轉動的花鍵轂
5---壓緊彈簧 6---球銷 7---推力塊 8---具有內齒的結合套
圖3-57展示了鎖環式同步器的工作原理。同步器的主體花鍵轂4與變速器的輸出軸相聯。鎖環3被花鍵轂帶動一起旋轉。鎖環上有比花鍵轂上槽窄的凸起，可以保證鎖環可以相對于花鍵轂有一定的轉動角度。
在換擋開始之前，撥叉被止動器保持在中間位置。換擋時，撥叉強制移動結合套8，這會使滑塊7帶動球銷6向鎖環3施加壓力。鎖環的錐面與齒圈上的錐面相抵觸。與齒輪1有關的結合套8與鎖環3之間的速度差會使齒輪1與鎖環的速度相等，這就是同步過程。
換擋撥叉進一步移動，結合套8上的斜面與鎖環3上對應齒端倒角斜面相接觸。重要的同步動作開始，就像圖2展示的那樣，換擋力通過滑塊7與凸牙8作用于同步環上。換擋力被分解成兩個力產生在斜面之間的拔環力矩TZ有使鎖環后退的趨勢。在存在摩擦的過程中不能進行換擋。經計算可得當拔環力矩TZ小于作用在鎖緊裝置上的摩擦力矩Tr的階段將會是鎖止裝置鎖死。在文獻中常常稱拔環力矩TZ為轉位轉矩Ti，稱摩擦力矩Tr為錐面力矩Tc。
當速度同步的時候摩擦力矩為零，如圖3 。解鎖過程開始，拔環力矩大于摩擦力矩，使鎖環相對于齒輪錐面轉動一個角度。在這個階段，換擋力迅速的減少。通過換擋撥叉的軸向移動彈簧支承球銷進入結合套的凹槽中，這把彈簧5按壓到滑塊中，直到被結合套覆蓋。
圖3-57 同步過程。用半滿的提示箭頭指示的方向移動，扭矩箭頭指示作用同步器環上的力矩
當齒輪嚙合時，結合套上齒越過鎖環使花鍵轂2與齒圈嚙合。在圖4中球銷被覆蓋。鎖環只有通過推力塊施加于花鍵轂進而施加在摩擦錐面上的殘余壓力。殘余壓力產生于移動結合套和滑塊(包括球銷）移動時產生的摩擦力。結合套相對與鎖環轉動一個角度而與花鍵轂結合。換擋動作完成。結合套把轉矩由齒輪傳到變速器軸上，如圖5.
圖5-38五擋雙離合變速器（保時捷）
同步的過程無論如何都是要耗費一些時間的。為了縮短換擋的時間，保時捷公司已經研發能過在受載時還能實現換擋的雙離合式變速器很長時間了。在以一個擋位前進時，相鄰的高檔位或者低檔位已經被換上，但是真正的換擋發生在分離當前離合器而同時結合另一個離合器。這意味著這這種換擋操作是基于摩擦的換擋操作。圖3-58展示了非共軸雙離合器式變速器布置圖。
第二個離合器通過空心軸與齒輪2和4相聯，第一個離合器通過空心軸的內軸與齒輪1,3和5相聯。因此，兩個連續的擋位可以被同時以合適的嚙合時機被換上。但是無論如何在常規的雙軸變速器中在不中斷動力傳遞是進行換擋是不可能實現的。
為了有足夠的換擋速度和舒適性，離合器的電動自動控制換擋機構是必不可少的。此外，駕駛者還可以直接手動操作。
2. 周轉式變速器（行星齒輪變速器）
周轉式變速器的特點是至少三個同軸桿通過各自齒輪的嚙合而被永久的聯系在一起。圖3-59展示一個周轉式變速器上不同中心軸上齒輪的各自位置。
兩根軸分別與太陽輪和齒圈相聯，第三根軸與行星架相聯。為了實現較小的軸向尺寸，采用簡單的齒輪形式以及較好的受力情況而選擇了這種設計。這種周轉式變速器設計被稱為直齒行星齒輪變速器。
圖3-59 行星齒輪變速器
周轉式變速器的特征參數是公稱變速比i0，它是齒圈與太陽輪的半徑比。
周轉式變速器的傳動比可由下面的基本方程得到：
這里 -----行星架的角速度；
-----齒圈的角速度；
------太陽輪的加速度；
------公稱變速比。
圖3-60展示了在穩定情況下行星齒輪的受力情況。
圖3-60 作用在行星齒輪上的力
由行星齒輪上的力和力矩平衡可以得到：
這里
考慮到各個量的大小，我們可以得到：
因為
我們可以類似的得到剩余的傳動比：
因此，如果忽略傳動過程中的能量損失，三根軸的轉矩比可以僅僅用行星齒輪機構的幾何參數來確定。
因為力矩平衡,我們可以得到
圖3-61 行星齒輪變速比以及理論變速比的變化范圍
因為轉矩即不會增加也不會減少，這樣，行星架轉矩MB的方向與太陽輪轉矩MS方向以及齒圈轉矩MH方向的方向相反。當所有軸都向一個方向轉動時行星齒輪傳動的輸出也同樣適應這種情況。
與傳統有級式變速器相比，自由轉動的行星齒輪變速器不受力。如果一個軸被固定，它成為力矩傳遞的支承。另兩根軸之間的轉速比固定這個比值可由它的特征方程決定。依靠與發動機相聯的軸以及被固定的轉速器殼，行星齒輪傳動機構可以有六個不同的傳動比，其中兩個是倒擋。
而且，還可以通過第三根軸直接與發動機相聯而獲得直接擋。所有的行星輪作為一個整體旋轉。傳動比i=2,i=0.5以及i=-1不能通過簡單的圓柱行星齒輪來實現。為了實現一定的傳動比，齒圈的齒數應該根據太陽輪的齒數來選定。這可以用錐齒輪或者準配多排行星齒輪變速機構。
圖3-62 行星齒輪變速器上制動齒圈的多片離合裝置
由于所受作用力被分布到幾個嚙合的齒輪（幾個行星輪）上，使這種優良的對稱設計同時具有了較小的體積以及較輕的質量和較大的最大傳遞轉矩。因此大量的行星齒輪變速器被應用在汽車上（自動變速箱，分動器，輪邊減速器）。
在這種設計中包括一些可變的傳動比，行星齒輪變速器可以用制動離合機構來實現在承載的條件下?lián)Q擋。在現在的變速器中，這些換擋單元有多盤制動器和離合器以及帶式制動器組成（圖3-62）它們大多是由液壓系統操縱的。
為了使變速箱中有較少的換擋機構并且有較多的擋位以及能夠很好地設計各擋位之間傳動比的關系，雙排行星齒輪變速器出現了。
圖3-63 雙排行星齒輪變速器的設計和擋位安排（戴姆勒奔馳）
C--- 離合器 B---制動器
圖3-63展示了4擋雙排行星齒輪變速器的原理示意圖以及其適合的變速離合機構。
通過一個太陽輪輸入，在后排行星傳動機構鎖止的時候通過兩個太陽輪輸入，通過后排行星齒輪傳動機構的行星架輸出。傳動比根據行星齒輪傳動機構的數量多次重復應用特征方程求得。
在自動變速器中，采用的雙排行星齒輪變速器。圖3-64展示了一個各擋位傳動比排列合理并且占用空間較小的拉維挪式變速器，它的設計原理及換擋機構簡圖在圖3-65上展示。
圖3-64 拉維挪式變速器 （來源：電機專用驅動系統 ）
由太陽輪輸入由齒圈輸出就像圖3-64展示的那樣。短的和長的行星輪用一個行星架連接。
圖3-65 拉維挪式變速器的設計及擋位安排（博格華納）
在有一個固定傳動比的圓柱行星齒輪傳動機構被用作輪邊減速器。這樣輸入軸的轉矩低于輸出軸的轉矩，且轉速高于輸出軸轉速。減速器被安裝在車輪上會減少非簧載質量（對比：車輛工程Ⅱ）。用雙級主減速器，可以明顯減少“短”半軸的長度就像一些工程車輛，而且因為需要較小傳動比的主減速器可以使空間的利用率提高。一個缺點就是由于多級傳動不可避免地減少了傳動效率，所以輪邊減速僅僅被用于商用車（圖3-66）。
行星齒輪變速器也用于分動器（3.5節）或者增距變速器（在功率分流設計中）周轉式變速器中沒有中間軸被固定。在分動器中輸入轉矩被分成兩個輸出在增距變速器中輸入轉矩可以被相加之后進行輸出，可是在這種情況下，周轉式變速器不再是一個功率轉換器，這是因為少了支承力矩。
圖3-66 行星齒輪輪邊減速器
3.4.1.2 Transmission designs
Mechanical stepped transmissions are classified into two design:
1) Dual shaft transmission
2） Bicycle transmission
1.Dual shaft transmission
The dual shaft transmission , also called the counter shaft transmission ,is the generic term applicable to all conventional stepped transmissions . Here , the torque transfer in the non-direct gear level takes place over externally toothed spur gear pairs mounted on two parallel shafts .
The spur gear pairs for the forward gear permanently mesh with each other . They consist Ufa fixed gear wheel connected to a shaft and a free gear wheel . The latter is positioned on the second shaft and can freely rotate but cannot be axially displaced . Positive-engaging clutch elements are used to engage the freely rotating gears to the shaft , as per the demand .
Dual shaft transmissions can be classified according to the position of the transmission input and output shaft into :
1) Coaxial two-shaft transmission
2）Deaxial two-shaft transmission
(1) Coaxial dual-shaft transmission In case of standard-driven vehicles (front engine with rear wheel drive ) , the dual-shaft mechanical stepped transmission in coaxial design is predominatly used . The coaxial position of the input and the output shaft which can normally be connected rigidly in direct gear is a characteristic feature of this design . The power flow for the remaining gears is led over a counter shaft (Fig.3-52) .
Fig.3-52 design and power flow in a coaxial dual-shaft transmission
( Source : mot - Special , Anterior )
As a rule , the coaxial counter shaft transmission is directly coupled to the engine along with the clutch assembly . The output is led over the cardan shaft . This leads to an unfavorable axle load distribution. This is the reason for the transmission being located at the real axle in some vehicles ( transaxle design ) . The cardan shaft then rotates at the engine speed .
Fig.3-53 shows an example for a coaxial five-speed transmission of a passenger car .
Fig.3-53 Five-speed manual transmission ( Ford )
(2) Deaxial dual-shaft transmission In dual-shaft transmission ,for vehicles with front-wheel drive or rear wheel driven vehicles with rear engines , the transmission input and output shaft have an axial offset and are normally arranged on the same side of the transmission . Close to the output is the differential , which is integrated into the transmission housing . The power flow in dual-shaft transmissions , in deaxial design , is indicated in the functional diagram shown in Fig.3-54 . In each gear , power is transferred over a gear wheel pair . Such a transmission is advantageous for front wheel driven vehicle since an axial offset between the crankshaft position and the position of the drive shaft must always be bridged .
Fig.3-54 Design and power flow of a deaxial two-shaft transmission
( Source : mot-Spezial , Antried )
Fig.3-55 shows an example of a deaxial dual-shaft transmission with front wheel drive and a transversely-mounted engine .
(3) Gearshift In dual-shaft transmission , shifting into different gears takes place by means of appropriate shifting clutch agent . In this case , one differentiates between :
1) Positively-engaged shifting clutch agents .
2）Adherent shifting clutch agents .
Fig.3-55 Deaxial 5-speed-manual transmission ( Saab )
In manual transmission , shifting of gears takes place over the gearshift roads . Using displacing sleeves , a positively-engaged link between the gear wheel and the shaft is established . A speed synchronisation of the shaft and the gear wheel is required . The so called non-synchromesh transmissions were used for a long time , where the speed equality was achieved by double declutching by the driver . The correct handling of non-synchromesh was achieved requires a certain skill , the result being that today ,they are only occasionally used in trucks . In order to achieve convenient operation at high shift speeds ,low noise and low wear , the forward geard gears of stepped transmissions are synchronised by ensuring speed equality of the rotating parts which have to be engaged during gear shift , over the frictional elements . Fig.3-56 show the elements involved in speed synchronisation .
Fig.3-56 borg-warner system single-taper synchroniser ( ZF )
1---idler gear running on needle bearings
2---synchroniser hub with selector teeth and friction taper
3---main functional element, synchroniser ring with counter-taper and locking toothing
4---synchroniser body with internal toothing for positive locking with the transmission shaft and external toothing for the gear shift sleeve 5---compression spring 6---ball pin
7---thrust piece 8---gearshift sleeve with constant-mesh internal gearing
Fig.3-57 shows the functional principle of the locking synchronisation . The synchroniser body 4 is fixed to the transmission shaft . The synchroniser ring 3 is guided by stop bosses in the syschroniser body . These are narrower than the grooves in the synchroniser body , which allows the synchroniser ring a certain amount freedom to twist radially .
Before the shifting process starts , the gearshift sleeve is held in the middle position by a detent . The gearshift force F triggers the axial movement of the gearshift sleeve 8 , which causes the thrust pieces 7 to act on the ball pin 6 to press the synchroniser ring 3 with is counter-taper against the friction taper of the synchroniser hub 2 , the speed difference between the gearshift sleeve 8 and the synchroniser ring 3 relative to the idler gear 1 causes the synchronising process which is known as “ asynchronsising “ ( Fig.3-57 ) .
Fig.3-57 Synchronising process . Arrows with half-filled tips indicate the direction of movement , the torque arrows indicate the torques acting on the synchroniser ring
The gearshift sleeve is moved further . This brings the bevels of the constant-mesh internal gearing of the gearshift sleeve 8 and the constant-mesh external gearing of the synchroniser ring 3 into contact . The main synchronisation action starts , phase 2 . The gearshift force is applied to the synchroniser ring via the thrust pieces 7 and the dogs 8 , the force being divided between them . The gearing torque TZ arising at the bevels acts to close the locking device . In the slipping phase the gearshift sleeve cannot be shifted . In the literature the gearing torque TZ that acts to close the locking device . In the slipping phase the gearshift sleeve cannot be shifted . In the literature the gearing torque TZ is frequently referred to and the index torque Ti and the friction torque TZ as the taper torque Tc . When speed sysnchronnisation has been achieved , the gearing torque becomes greater than the friction torque , and acts via the bevels to return the synchroniser . The gearshift force decrease rapidly in this phase . Throughout the axial movement of the gearshift sleeve , the spring-loaded ball pin slides along the inclined grooved surface . This presses it against the spring 5 into the thrust piece , until it is covered by the gearshift sleeve .
As the gear is engaged , the gearshift sleeve toothing encounters the bevels of the selector teeth of the synchroniser hub 2 . In this phase 4 the ball pin is covered . The synchroniser ring is pressed against the friction taper of the synchroniser hub only by residual pressure via the thrust pieces . This residual pressure arises from the friction between the moving the moving gearshift sleeve and the trust pieces ( with ball pins ) . The gearshift sleeve toothing twists the synchroniser hub relative to the synchroniser ring . The shift movement is enable . The gearshift sleeve positively engages the power flow between the gear pair and the transmission shaft , phase 5 .
This process of synchronisation however requires finite time . In order to shorten this synchronisation shifting time , Porsche worked for many years on the so called “ double clutch transmission “ which can be shifted under load . Driving in a particular gear , the next higher or lower gear can be shifted . The real gearshift takes place by opening one clutch and closing the other simultaneously . This means that the gearshift in this case is friction based . Fig.3-58 shows the layout of a double clutch transmission in deaxial design .
The second clutch is connected over a hollow shaft with the gear wheels of the gears 2 and 4 and the first clutch over the inner shaft with the gear wheels of the gears 1 , 3,and 5 . Thus , two successive gears can be shift between the gears on one shaft without torque interruption , as is the case in regular dual-shaft transmissions .
For sufficient speed and comfort , electronic regulation of clutch control and gearshift is necessary . The driver , additionally , can externally influence this arrangement .
Fig.3-58 5-speed double clutch transmission ( Porsche )
(2) Epicyclic transmission ( planetary gearbox )
Epicyclic transmissions are characterised by at least three coaxial center shafts that are permanently engaged each other over the gear wheel . Fig.3-59 shows the different gear wheel positions in an epicyclic transmission with three center shafts .
Two of the shafts involved are connected to the central wheels , the sun wheel and the hollow wheel . The third is coupled to a bar which is connected to the so-called planetary wheels
which mesh with both the central wheels . This design is chosen , when possible , as a result of its low constructional length simplicity of the gear wheels and the point of force application which are in place . This design of the spur-gear planetary transmission .
Fig.3-59 Epicyclic transmission
The characteristic parameter of an epicyclic transmission is the nominal ratio i0 which is defined as the ratio of hollow wheel radius to the sun wheel radius .
The speed ratios of a planetary gear train result from the basic equation for epicyclic transmission :
Where -----angular velocity of the bar ；
-----angular velocity of the hollow wheel ；
------angular velocity of the sun w ；
------nominal ratio 。
Fig.3-60 shows the forces on a planetary wheel i.e. In a constant state of motion .
Fig.3-60 Forces acting on a planetary wheel
The balance of forces and torques on a planetary wheel results in :
Where
Considering the magnitude , we get :
Since
The remaining torque ratios can be calculated similarly :
Thus , when losses during moment transfer are neglected , the ratio of torques on the three center shaft can be clearly determined , using only the geometric data of the planetary train .
For equilibrium , we obtain
Hence the torques are either split up or added . In case , the direction of bar torque MB is opposite to the torques MS and MH acting in the same direction . When all shaft rotate in the same direction , the same is applicable to the power output of a planetary transmission .
In contrast to the usual stepped transmissions , free bearing forces . If a shaft is rigidly braked ,it acts as a torque support . The other two shafts move relative to each other in a firm speed ratio , which can be determined from the basic equation . Depending on the coupling of the individual center shaft with the engine , the output and the rigid transmission housing , a planetary train allows for six different ratios , two of which reverse the direction between the engine and the output sides ( Fig.3-61 ) .
Fig.3-61 steps of a planetary gear with theoretical range ratios
Moreover , a direct gear can be realised if the third shaft is linked with the engine or the output . The entire planetary gear then rotates as a block . The ratios i=2 , i=0.5 or i=-1 cannot be realised by a simple spur-gear planetary . In order to achieve this , the number of teeth on the hollow gear have to correspond to that on the sun gear . The situation can be set right using conical gear wheels or by assembled epicyclic transmission .
The favorable , symmetrical design as well as the low constructional volume and low weight with a simultaneously high maximum transferable torque , due to force distribution over several meshings ( several planetary wheels ) , led to a large number of applications of planetary transmissions in motor vehicles ( automatic transmission , transfer case in all-wheel drive systems , wheel-hub transmission ) .
In designs which involve several ratios , the planetary transmission can be shifted under load by employing adherent clutch shift agents . In realised transmissions , these shift elements consist of multi-disk brakes and clutches as well as band brakes ( Fig-3-62 ) , which for the most part are hydraulically operated .
In order to have less number of shift clutch agents in gearboxes with high number of gear ratios and to freely design in the relationship of the individual gear ratios against each other , coupled planetary transmissions used .
Fig-3-63 shows the principle sketch of a 4-speed transmission with 2 planetary sets and the appropriate shift clutch agents .
Fig.3-62 Adherent shift clutch agents in epicyclic transmission for braking the hollow wheel
Fig.3-63 Design and shifting diagram of a coupled planetary train ( Daimler Benz )
C-----clutch b-----brake
The input is performed over one sun gear , or in case of a blocked second planetary train , over two sun wheels . The output takes place over the planetary carrier of the rear planetary train . The particular gear ratios result from from the repeated use of the basic equation , according to number of planetary trains involved .
Fig.3-64 Ravigneaux-transmission ( Source : mot-Spezial , Antrieb )
In automatic transmission , often special designs of coupled planetary transmission are used . Fig.3-64 shows a Ravigneaux-transmission that has a simple design of favorable gear ratios and a low constructional space . The design and shifting diagrams are shown in Fig-3-65 .
Fig.3-65 Design and shifting diagram of Rvigneaux-transmission ( Borg Warner )
C---clutch B---brake O---one-way clutch
The input is performed over the sun wheels , while the output is derived over the hollow gear in the transmission as shown in Fig.3-64 . The short and long planetary gears are are connected by a common bar .
In non-shiftable designs with a fixed gear ratio , spur-gear planetary trains are used as wheel hub transmissions .