【溫馨提示】 dwg后綴的文件為CAD圖，可編輯，無水印，高清圖，壓縮包內文檔可直接點開預覽，需要原稿請自助充值下載，請見壓縮包內的文件及預覽，所見才能所得，請細心查看有疑問可以咨詢QQ：414951605或1304139763
FXS雙出風口籠形轉子選粉機的設計與改造
摘 要
傳統旋風選粉機因分離效率低而影響粉磨產品的產量和質量，采用導流口可調式雙出風口旋風分離器技術取代傳統單出風口分離器對傳統旋風選粉機改造后，降阻節能作用顯著，分離效率明顯提高，其提高部分恰是捕集細粉增加部分，因而產品細度改觀，比表面積增大。產量也隨之提高了。
關鍵詞：旋風分離器；選粉機；雙出風口；細度
Abstract
Tradition whirlwind powder selecting machine had low separation efficiency,it influence the output and quality of the powder products.Adopting water conservancy diversion mouth but the mode one pair of air outlets whirlwind separator technology replaced the tradition single air outlets separator.After transformated the tradition whirlwind powder slecting machine ,the reduce obstruction function was remarkable.The separation fficiency obvious improved.It was the lucky catch and collect thin powder of the adding.So the thin degree of the products changed,than the surface increased.The quality also improved.
Keyword:Whirlwind separator; Powder selecting machine;
One pair of air outlets; Thin degree;
目 錄
引言…………………………………………………………………………………..1
正文…………………………………………………………………………………. 3
1.技改方案和措施…………………………………………………………………. 3
1.1選粉室內部結構改造…………………………………………………………. 3
1.2選粉室上部的內部結構進行更新……………………………………………. 4
1.3選粉機外部工作環境的改善…………………………………………………. 6
1.4改進選粉機……………………………………………………………………. 7
2.雙粗風口旋風分離器……………………………………………………………. 8
2.1工作原理及優點……………………………………………………………... 8
2.2細粉集灰斗設計的弊與利………………………………………………….. 11
3.存在問題及診斷………………………………………………………………… 12
3.1粗粉與細粉的分離………………………………………………………….. 13
3.2細粉與氣流的分離………………………………………………………….. 13
4.旋風選粉機的設計計算……………………………………………………….. 13
4.1旋風選粉機的阻力損失計算……………………………………………….. 14
4.2根據規格直徑核算風量…………………………………………………….. 16
5.旋風筒管道阻力損失計算……………………………………………………….16
結論………………………………………………………………………………… 20
致謝………………………………………………………………………………… 21
參考文獻…………………………………………………………………………….22
附件清單…………………………………………………………………………….23