FZY-300液壓式半球閥閥座裝配機工作裝置設計【含15張CAD圖紙】
資源目錄里展示的全都有，所見即所得。下載后全都有,請放心下載。原稿可自行編輯修改=【QQ：401339828 或11970985 有疑問可加】
本科生畢業設計（論文）選題、審題表
學院（系）
機電工程學院
選題
教師
姓 名
李鐵成
專 業
機械設計制造及其自動化
專業技術職務
副教授
申報課題名稱
FZY-300液壓式半球閥閥座裝配機設計--工作裝置設計
課題性質
A
B
C
D
E
課題來源
A
B
C
D
√
√
課題簡介
（包括研究的目的、內容和意義等）
本課題是來自于閥門生產企業的研制型課題，屬于校企聯合科技攻關項目。目前企業在半球閥閥座的裝配上，依然是采用人工裝配，勞動強度大、安裝精度低，且容易在裝配過程中損傷閥套。本課題通過FZY-300液壓式閥座裝配機的研制，解決企業生產中的技術問題。本設計主要是完成閥座裝配機工作裝置的設計。通過本設計，使學生受到一個全面的工程設計訓練，全面提高學生的工程綜合應用能力、運用相關參考文獻的能力、機械設計能力和計算機應用能力等。本設計結果經廠方認可后，將在生產實踐中實際應用。
設計(論文)
要 求
（包括應具備的條件、圖表等）
工作條件：從事該項設計無特殊的工作條件要求,要求學生具有較強的機械設計能力和計算機繪圖能力。
工作要求：根據設計任務、工廠調研撰寫畢業設計方案論證報告；制定FZY-300液壓式閥座裝配機的總體設計方案；完成閥座裝配機工作裝置的設計。繪制閥座裝配機整機裝配圖；繪制工作裝置的部件裝配圖；繪制相關零件工作圖；撰寫設計計算說明書。
課題預計
工作量大小
大
適中
小
課題預計
難易程度
難
一般
易
√
√
院學術委員會審定意見：
負責人(簽名)： 年 月 日
注：本課題由 同學選定，學號：
注：1．該表的填寫只針對1名學生做畢業設計（論文）時選擇使用，如同一課題由2名及2名以上同學選擇，應在申報課題的名稱上加以區別（加副標題），并且在“設計（論文）要求”一欄中加以體現。
2．“課題性質”一欄：A．工程設計；B．工程技術研究；C．軟件工程（如CAI課題等）；D．文獻型綜述；E．其它。
3．“課題來源”一欄：A．自然科學基金與部、省、市級以上科研課題；B．企、事業單位委托課題；C．校、院（系）級基金課題；D．自擬課題。
4．“課題簡介”一欄：主要指研究設計該課題的背景介紹及目的、意義。
5．“設計（論文）要求（包括應具備的條件）”一欄：主要指本課題技術方面的要求，而“條件”指從事該課題必須應具備的基本條件(如儀器設備、場地、文獻資料等)。
機電工程學院
畢業設計任務書
題 目: FZY-300液壓式半球閥閥座裝配機設計
—工作裝置設計
學生姓名：
學 號：
專業班級：
指導教師：
畢業設計任務書
1．本畢業設計課題應達到的目的：
本課題是來自于閥門生產企業的研制型課題。目前企業在半球閥閥套的裝配上，依然是采用人工裝配，勞動強度大、安裝精度低，且容易在裝配過程中損傷閥套。本課題通過FZY-300液壓式半球閥閥座裝配機的研制，解決企業生產中的技術問題。本設計是完成FZY-300液壓式半球閥閥座裝配機工作裝置設計，與同組同學合作完成整機設計。通過本設計，使學生受到一個全面的工程設計訓練，全面提高學生的工程綜合應用能力、運用相關參考文獻的能力、機械設計能力和計算機應用能力等。本設計結果經廠方認可后，可在生產實踐中實際應用。
2．畢業設計任務的內容和要求（包括原始數據、技術要求、工作要求等）：
1）結合設計內容，翻譯相關英文資料；
2）研究畢業設計任務、要求，通過工廠調研、收集設計資料，制定設計方案，撰寫方案論證報告；
3) 完成FZY-300液壓式半球閥閥座裝配機工作裝置設計；與同組同學合作完成整機設計；繪制閥座裝配機總裝圖和閥座裝配機機身部分裝配圖；
4) 繪制FZY-300液壓式半球閥閥座裝配機工作裝置主要零件工作圖，完成所有設計任務；
5）撰寫設計說明書；
6）撰寫畢業設計總結（可附在設計說明書后）；
7）修改、整理設計圖紙，修改完善設計說明書，參加畢業設計答辯。
3．對畢業設計成果的要求〔包括畢業設計、圖表、實物樣品等〕：
外文文獻翻譯1份（不少于3000漢字）；畢業設計方案論證報告1份（不少于2000漢字）；FZY-300液壓式半球閥閥座裝配機工作裝置設計，繪制裝配圖0#圖1張；繪制整機裝配圖，整機裝配圖0#圖1張；FZY-300液壓式半球閥閥座裝配機工作裝置主要零部件工作圖繪制，零部件工作圖合計0#圖2張；編寫設計計算說明書，設計計算說明書1份（不含計算公式、圖表等，要求在5000字以上）。
4．主要參考資料：
1 徐灝等主編.機械設計手冊.北京:機械工業出版社,1999
2 實用機械設計手冊編寫組編.實用機械設計手冊.北京:機械工業出版社,1995
3 曲繼方，安子軍，曲志剛主編.機構創新原理.北京.科學出版社.2001
4 朱張校主編．工程材料．北京：清華大學出版社，2001
5 機械設計課程設計．北京：機械工業出版社，2003
6 陸慶主編．機械設計手冊．北京：機械工業設計出版社，1987
7 張紹甫主編．機械零件課程設計．北京：機械工業出版社,1996
8 李華主編．機械制造技術．北京：機械工業出版社，1996
9 劉昆政主編．間歇運動機構．遼寧：大連理工出版社，1991
10 于華主編．?dāng)?shù)控機床的編程及實例．北京：機械工業出版社，1998
11 鄧文英主編．金屬工藝學．北京：高等教育出版社，2004
12 黃邦彥主編．現代設計方法基礎．北京：中國人民大學出版社，2001
13 張紹甫，徐錦康主編．機械零件．第2版．北京：機械工業出版社，1995
14 張代東主編．機械工程材料應用基礎．北京：機械工業出版社，2001
15 華楚生主編．機械制造技術基礎．重慶：重慶大學出版社，2000
畢業設計任務書
5．本畢業設計（論文）課題工作進度計劃：
起 迄 日 期
工 作 內 容
2012年2月20日~2月23日
畢業設計動員，下達畢業設計任務；
2012年2月24日~3月05日
工廠調研、收集設計資料；英文資料翻譯；
2012年3月06日~3月20日
研究設計任務，制定設計方案，撰寫方案論證報告；
2012年3月21日~4月21日
液壓式閥座裝配機工作裝置設計，繪制部件裝配圖；
2012年4月22日~5月05日
與同組同學合作完成整機設計，繪制總裝圖；
2012年5月06日~5月15日
繪制工作裝置主要零件工作圖，完成所有設計任務；
2012年5月16日~5月21日
撰寫設計說明書，撰寫畢業設計總結；
2012年5月22日~5月27日
指導教師審查，圖紙及設計說明書修改完善；
2012年5月28日~5月30日
評閱教師審查，整理所有設計資料，準備參加答辯；
2012年5月31日~6月05日
畢業設計答辯，修改設計圖紙和設計說明書。
所在系（教研室）審查意見：
負責人：
年 月 日
院（部）學術委員會意見：
負責人：
年 月 日
4
畢業設計(論文)外文資料翻譯
設計題目: FZY-300液壓式半球閥閥座裝配機設計
—工作裝置設計
譯文題目: 先進加工方法
院系名稱： 機電工程學院 專業班級：
學生姓名：
指導教師：
附 件： 1.外文資料翻譯譯文；2.外文原文。
指導教師評語：
簽名： 年 月 日
附件1：外文資料翻譯譯文
先進加工方法
摘要：隨著產品硬件結構的復雜化，新的、富有遠見的加工方法正得到普及，這已經成為近幾年機械加工行業的發展趨勢。隨著其他科技諸如電子技術及電子計算機技術的發展，機床的控制方法和材料成形方法也變得日新月異。甚至它們提供給設計者的設計方法和加工工藝可能遠遠超過那些最有經驗的設計師。這就迫使機械設計人員從事與以往不同的研究。本文主要探討的是數控加工過程中所使用的工具。CNC控制器能用來驅動和控制機床運動，同時由于計算機技術的快速發展，數控機床的編程也變得越來越容易。
關鍵詞：數控機床；計算機輔助設計；計算機輔助制造
1. 數控機床的發展
在現今的加工制造領域，數控機床已經得到廣泛地應用。數控機床起源于英國，發展于美國。在第二次世界大戰之后，隨著商業和軍事的快速發展，在勞動密集型加工企業中，機械加工的精度往往得不到有效地保證，那么怎么克服常規加工方法中加工精度不足的問題呢？1949年美國政府授權美國空軍與Parsons公司簽約，讓他們找到一種靈活的、有力的制造系統，以便擴大生產，提高生產效率。在1949—1951期間，他們聯合發明了一種可使用多種刀具的第一個數控系統。辛辛那提機床刀具公司把他們的一個28英寸的“Hydro—Tel”軍用機床改裝為三軸自動機床，同時改變了它們的外部輪廓。在美國數控機床發展的同時，英國公司ALIFRED Herber也制造出了一臺NC機床。1956年更可靠的曲線路徑控制系統開始使用。幾年后，美國與歐洲開始了更深遠的研究。
早期的數控機床主要應用于航空業，因?yàn)樗玫牧慵膸缀涡螤畋容^復雜，如渦輪機葉片，同時航空工業需要的復雜的控制系統。隨著點與點控制器的發展，數控機床更為廣泛地用于機械零件的加工當中去。較簡單的點與點控制機床不僅比復雜的連續路徑的同類產品便宜，而且加工精度也比較高。
2.NC優勢
數控機床與普通機床擁有相同的物理特性，其金屬切削的原理與普通機床也是一樣的。數控機床與普通機床最大的不同在于數控機床是用計算機控制主軸的動作，而CNC機床的最大優勢在于準確而快速的定位功能。CNC控制的機床可能簡單得像2軸鉆床加工中心。低轉速、高馬力的特性使其可以提高金屬的切削效率。高轉速主軸使其可以利用高切削速度的工具，如鉆頭、小直徑銑刀。這些依賴機床型號的切削刀具都是一些標準件，如磨床的刀具、鉆頭或車刀。數控機床對切削速度和進給量的控制像普通機床一樣精確。數控機床不會在一次加工完成后停下來計劃下一次加工過程，它不會疲勞，不會中斷。當能夠準確控制數控機床的切削速度時，就可以通過控制進給速度來提高加工效率，目前進給速度已經從原來的60英寸/分發展到200英寸/分、400英寸/分甚至1000英寸/分了。
在數控機床出現之前，復雜形狀零件的加工是極其困難的。數控機床的出現使得這些復雜形狀零件的加工變得更加容易。通過改變加工程序可以很容易地實現不同零件的加工。數控機床不需要額外的時間和特別的預防措施就可以加工出高精度的零件。同時數控機床還不需要復雜的夾具，從而節省了裝卡的時間。一旦零件的加工程序編寫好，那么每一個零件的加工時間就是一樣的。這樣重復性的加工就可以精確地控制加工成本。在傳統加工過程中，為了提高加工效率，一批零件通常要大量加工。有了數控機床，就是一個零件都可以高效地加工出來。這樣就可以減少大量庫存，減少成本，提高經濟效益。現在一臺數控機床可以完成多臺不同類型的普通機床同時才能完成的操作。它就像一個熟練的工程師，通過編程就可以很經濟地加工出各種各樣的零件。
目前利用數控機床進行加工制造時通常需要三類人。第一類人是數控編程人員，主要任務是編寫機床運行的代碼，這類人通常不需要與數控機床直接接觸；第二類人是程序安裝人員，主要是把程序裝入機床控制單元，然后檢查程序并進行試件加工，數控機床的控制單元（單片機）還可以用于改變、更正加工程序；第三類人是操作人員以及加工完成后卸載零件。在一個小公司中，也許一個人就能完成三個人的工作。
數控機床一般分成兩大類。一類是利用G代碼和M代碼進行編程輸入的；另一類是利用人機對話方式輸入。所謂的人機對話也被稱為人性化或提示輸入。
3.CAM和CNC
目前隨著計算機輔助制造技術的發展，其正在改變數控編程人員的工作，即從簡單的人工編程到變成一個最大的數控程序輸出機。自從數控機床出現，各種各樣的數控控制單元也各不相同。由于不同的控制單元利用不同的編程語言和代碼進行編程，而不同的控制代碼可能不能被不同的控制單元識別。為了制造一種在不同控制單元上都可以利用的代碼，每一個數控機床制造商都在不斷地提高和更新它們的控制器。這些改進主要包括新加的代碼在已有的代碼的基礎上工作。
計算機輔助制造系統還使得編程員有更多的精力專注于加工工藝的選擇而不是程序代碼的編寫。每當編程員接到一個圖紙，他首先考慮的是怎么把它加工處來，從數控機床的選擇、加工工藝的選擇、夾具的選擇，每一個方面都必須考慮。這就要求數控編程人員對機床的特性、功能，如機床主軸馬力、最大轉速、工作臺重量等有一個了解。同時數控編程人員還必須對加工制造的知識有一定了解，比如為了得到需要的加工精度及表面粗糙度，選擇什么樣的刀具，刀具的材料如何等，這就要求對刀具的知識有一定地了解。因?yàn)榈毒叩牟粩喔?，過去的編程人員必須花費大量的時間來研究刀具、刀具材料等加工制造的基本知識?，F(xiàn)在新的刀具信息不僅可以通過手冊或刀具制造商那里獲得，也可以從刀具制造商的軟件中獲得。
在加工制作過程中，也有各種軟件幫助編程人員。比如，Kennametal 公司的"TOOLPRO"軟件就可以幫助編程人員在面對不同的加工情況下怎樣選擇最佳的加工要素，如切削速度，進給速度等。"TOOLPRO"軟件的另一個優勢就是可以幫助編程人員選擇加工時所需的機床功率，這就比人工粗選精確得多。通過軟件的幫助，編程人員就可以很容易地確定在加工過程中需要的各種加工要素。比如精加工，當零件在加工中最小進給量確定了，就可以選擇最佳的切削速度，這就極大地提高了機床的加工效率。目前，在加工中心中使用的軟件主要是是ENGERSOLL CUTTING TOOL公司的ACTUAL CHIP THICKNESS的軟件，該軟件可以用來幫助編程人員預估在加工過程中，特別是高精度的加工中的進給量。
有了這些軟件的幫助，現在的編程人員的工作就可以這樣進行：
首先，編程人員繪制需要加工零件的模型。然后考慮零件的加工工序，是粗加工還是精加工、是車還是磨削，裝夾卡具是虎鉗、抓盤還是卡盤等。這些考慮之后，就可以用計算機編寫工藝卡了，該工藝卡包括各種記錄，如加工工件單位是公制還是英制、機床類型、參數、刀具選擇、切削材料類型、安裝夾緊等。
然后就是利用計算機模擬零件的加工過程。從軟件中選擇機床，確定加工過程中的各種參數。如鉆削的時候，當孔的位置坐標和加工深度確定以后，那么就可以精確地在該點加工孔了。如果位置錯了，還可以撤銷這一記錄，然后輸入新的坐標。當磨削端面的時候，切削運動一般是一條弧線，如果編程的時候錯誤地編成直線了，軟件還會自動報警，提醒編程人員。
在程序運行的過程中，顯示軌跡的命令可以在顯示器上顯示當前刀具的運行軌跡，同時也會顯示各種刀具在加工過程中的使用順序，當需要改變刀具的使用順序的時候，只用一個簡單的命令就可以實現。
但是，CAM程序的加工順序與普通機床加工中的工序可能不相同。例如，在零件上加工孔時，普通機床上是操作人員根據已加工孔的外部輪廓來定位加工內孔。在CAM中，程序員可以選擇各種不同的粗基準進行模擬加工，以便選出最有效的加工方法。在模擬的過程中，不同的顏色代表不同的刀具，這樣就可以方便的觀察不同刀具的運行軌跡。同時CAM系統還可以讓程序員從不同的角度，比如頂部、正面、側面觀察圖形，以便發現錯誤。比如刀具的軌跡，在俯視圖中可能正確，但在主視圖中，切削深度可能不一樣，這樣的變化很容易看得到。
當?shù)毒呗窂郊凹庸ろ樞虼_定以后，機床加工的程序代碼就會自動生成。在機床加工工件的時候，機床代碼發生器需要四個文件。JOBPLAN文件表示刀具信息，GRAPHICS文件表示刀具路徑和切削順序，也用MACHINE DEFINE文件表示CNC代碼命令。這個文件可提供加工過程中需要的最大的進給速度、轉速、加工時間等等。當代碼發生器完成操作的時候，零件加工的計劃時間也就隨之確定。這個時間是根據進給速度、運行的距離、兩點間在最大進給速度下無切削運動的時間、換刀時間等等確定的。確定的加工時間可用來估計生產費用。若不僅僅只有一類CNC機床來加工該工件，比較不同機床的加工總時間就可以選擇一種更有效的機床來加工
4.CAD/CAM
目前另一個確立刀具路徑的方法是借助計算機輔助繪圖。因?yàn)榱慵膱D形輪廓和信息都存儲在電腦上。SmartCAM通過CAM CONNECTION讀取CAD圖，然后轉換圖形。相對于用程序表示外形，現在可以用圖形輪廓表示即可。但是程序員還需要編寫含有刀具信息的工藝卡。然后，使用SHOWPATH功能可以顯示每個刀具的路徑和使用的順序。
隨著CAD/CAM技術的交叉發展，CAD/CAM的工作方式也在變換著。一些CAD/CAM程序在計算機上可以在一些按鍵、圖紙、程序等方面相互轉換。
附件2：外文原文
ADVANCED MACHINING PROCESSES
Abstract: As the hardware of an advanced technology becomes more complex, new and visionary approaches to the processing of materials into useful products come into common use. This has been the trend in machining processes in recent years.. Advanced methods of machine control as well as completely different methods of shaping materials have permitted the mechanical designer to proceed in directions that would have been totally impossible only a few years ago.
Parallel development in other technologies such as electronics and computers have made available to the machine tool designer methods and processes that can permit a machine tool to far exceed the capabilities of the most experienced machinist.
In this section we will look at CNC machining using chip-making cutting tools. CNC controllers are used to drive and control a great variety of machines and mechanisms, Some examples would be routers in wood working; lasers, plasma-arc, flame cutting, and waterjets for cutting of steel plate; and controlling of robots in manufacturing and assembly. This section is only an overview and cannot take the place of a programming manual for a specific machine tool. Because of the tremendous growth in numbers and capability of computers ,changes in machine controls are rapidly and constantly taking place. The exciting part of this evolution in machine controls is that programming becom eseasier with each new advanced in this technology.
key word: CNC CAD CAM
The Early Development Of Numerically Controlled Machine Tools
The highly sophisticated CNC machine tools of today, in the vast and diverse range found throughout the field of manufacturing processing, started from very humble beginnings in a number of the major industrialized countries. Some of the earliest research and development work in this field was completed in USA and a mention will be made of the UK's contribution to this numerical control development.
A major problem occurred just after the Second World War, in that progress in all areas of military and commercial development had been so rapid that the levels of automation and accuracy required by the modern industrialized world could not be attained from the lab our intensive machines in use at that time. The question was how to overcome the disadvantages of conventional plant and current manning levels. It is generally acknowledged that the earliest work into numerical control was the study commissioned in 1947 by the US government. The study's conclusion was that the metal cutting industry throughout the entire country could not copy with the demands of the American Air Force, let alone the rest of industry! As a direct result of the survey, the US Air Force contracted the Persons Corporation to see if they could develop a flexible, dynamic, manufacturing system which would maximize productivity. The Massachusetts Institute of Technology (MIT) was sub-contracted into this research and development by the Parsons Corporation, during the period 1949-1951,and jointly they developed the first control system which could be adapted to a wide range of machine tools. The Cincinnati Machine Tool Company converted one of their standard 28 inch "Hydro-Tel" milling machines or a three-axis automatic milling made use of a servo-mechanism for the drive system on the axes. This machine made use of a servomechanism for the drive system on the axes, which controlled the table positioning, cross-slide and spindle head. The machine cab be classified as the first truly three axis continuous path machine tool and it was able to generate a required shape, or curve, by simultaneous slide way motions, if necessary.
At about the same times as these American advances in machine tool control were taking Place, Alfred Herbert Limited in the United Kingdom had their first Mutinous path control system which became available in 1956.Over the next few years in both the USA and Europe, further development work occurred. These early numerical control developments were principally for the aerospace industry, where it was necessary to cut complex geometric shapes such as airframe components and turbine blades. In parallel with this development of sophisticated control systems for aerospace requirements, a point-to-point controller was developed for more general machining applications. These less sophisticated point-to-point machines were considerably cheaper than their more complex continuous path cousins and were used when only positional accuracy was necessary. As an example of point-to-point motion on a machine tool for drilling operations, the typical movement might be fast traverse of the work piece under the drill's position-after drilling the hole, anther rapid move takes place to the next hole's position-after retraction of the drill. Of course, the rapid motion of the sideways could be achieved by each axis in a sequential and independent manner, or simultaneously. If a separate control was utilisec for each axis, the former method of table travel was less essential to avoid any backlash in the system to obtain the required degree of positional accuracy and so it was necessary that the approach direction to the next point was always the same.
Advantages of Numerical Control
A manually operated machine tool may have the same physical characteristics as a CNC machine, such as size and horsepower. The principles of metal removal are the same. The big gain comes from the computer controlling the machining axes movements. CNC-controlled machine tools can be as simple as a 2-axis drilling machining center. With a dual spindle machining center, the low RPM, high horsepower spindle gives high metal removal rates. The high RPM spindle allows the efficient use of high cutting speed tools such as diamonds and small diameter cutters (Figure O-2). The cutting tools that remove materials are standard tools such as milling cutters, drills, boring tools, or lathe tools depending on the type of machine used. Cutting speeds and feeds need to be correct as in any other machining operation. The greatest advantage in CNC machining comes from the unerring and rapid positioning movements possible. A CNC machine does dot stop at the end of a cut to plan its next move; it does not get fatigued; it is capable of uninterrupted machining error free, hour after hour. A machine tool is productive only while it is making chips.
Since the chip-making process is controlled by the proper feeds and speeds, time savings can be achieved by faster rapid feed rates. Rapid feeds have increased from 60 to 200 to 400 and are now often approaching 1000 inches per minute (IPM). These high feed rates can pose a safety hazard to anyone within the working envelope of the machine tool.
Complex contoured shapes were extremely difficult to product prior to CNC machining .CNC has made the machining of these shapes economically feasible. Design changes on a part are relatively easy to make by changing the program that directs the machine tool.
A CNC machine produces parts with high dimensional accuracy and close tolerances without taking extra time or special precautions, CNC machines generally need less complex work-holding fixtures, which saves time by getting the parts machined sooner. Once a program is ready and production parts, each part will take exactly the same amount of time as the previous one. This repeatability allows for a very precise control of production costs. Another advantage of CNC machining is the elimination of large inventories; parts can be machined as needs .In conventional production often a great number of parts must be made at the same time to be cost effective. With CNC even one piece can be machined economically .In many instances, a CNC machine can perform in one setup the same operations that would require several conventional machines.
With modern CNC machine tools a trained machinist can program and product even a single part economically .CNC machine tools are used in small and large machining facilities and range in size from tabletop models to huge machining centers. In a facility with many CNC tools, programming is usually done by CNC programmers away from the CNC tools. The machine control unit (MCU) on the machine is then used mostly for small program changes or corrections. Manufacturing with CNC tools usually requires three categories of persons. The first is the programmer, who is responsible for developing machine-ready code. The next person involved is the setup person, who loads the raw stork into the MCU, checks that the correct tools are loaded, and makes the first part. The third person is the machine and unloads the finished parts. In a small company, one person is expected to perform all three of these tasks.
CNC controls are generally divided into two basic categories. One uses a ward address format with coded inputs such as G and M codes. The other users a conversational input; conversational input is also called user-friendly or prompted input. Later in this section examples of each of these programming formats in machining applications will be describes.
CAM and CNC
CAM systems have changed the job of the CNC programmer from one manually producing CNC code to one maximizing the output of CNC machines. Since CNC machine tools are made by a great number of manufacturers, many different CNC control units are in use. Control units from different manufacturers use a variety of program formats and codes. Many CNC code words are identical for different controllers, but a great number vary from one to another.
To produce an identical part on CNC machine tools with different controllers such as one by FANCU, OKUMA or DYNAPATH, would require completely different CNC codes. Each manufacturer is constantly improving and updating its CNC controllers. These improvements often include additional code words plus changes in how the existing code works.
A CAM system allows the CNC programmer to concentrate on the creation of an efficient machining process, rather than relearning changed code formats. A CNC programmer looks at the print of a part and then plans the sequence of machining operations necessary to make it (Figure O-3). This plan includes everything, from the selection of possible CNC machine tools, to which，tooling to use, to how the part is held while machining takes place. The CNC programmer has to have a thorough understanding of all the capacities and limitations of the CNC machine tools that a program is to be made for. Machine specifications such as horsepower, maximum spindle speeds, workpiece weight and size limitations, and tool changer capacity are just some of the considerations that affect programming.
Another area of major importance to the programmer is the knowledge of machining processes. An example would be the selection of the surface finish requirement specified in the part print. The sequence of machining processes is critical to obtain acceptable results. Cutting tool limitations have to be considered and this requires knowledge of cutting tool materials, tool types, and application recommendations.
A good programmer will spend a considerable amount of time in researching the rapidly growing volume of new and improved tools and tool materials. Often the tool that was on the cutting edge of technology just two years ago is now obsolete. Information on new tools can come from catalogs or tool manufacturers' tooling engineers. Help in tool selection or optimum tool working conditions can also be obtained from tool manufacturer software. Examples would be Kennametal's "TOOLPRO", software designed to help select the best tool grade, speed, and feed rates for different work materials in turning application. Another very important feature of "TOOLPRO" is the display of the horsepower requirement for each machining selection. This allow the programmer to select a combination of cutting speed, feed rate, and depth of cut that equals the machine's maximum horsepower for roughing cuts. For a finishing cut, the smallest diameter of the part being machined is selected and then the cutting speed varied until the RPM is equal to the maximum RPM of the machine. This helps in maximizing machining efficiency. Knowing the horsepower requirement for a cut is critical if more than one tool is cutting at the same time.
Software for a machining center application would be Ingersoll Tool Company's "Actual Chip Thickness", a program used to calculate the chip thickness in relation to feed-per-tooth for a milling cutter, especially during a shallow finishing cut. Ingersoll's "Rigidity Analysis" software ealculates tool deflection for end mills as a function of tool stiffness and tool force.
To this point we looked at some general qualifications that a programmer should possess. Now we examine how a CAM system works. Point Control Company's SmartCam system uses the following approach. First, the programmer makes a mental model of the part to be machined. This includes the kind of machining to be performed-turning or milling. Then the part print is studied to develop a machining sequence, roughing and finishing cuts, drilling, tapping, and boring operations. What work-holding device is to be used, a vise or fixture or clamps? After these considerations, computer input ；an be started. First comes the creation of a JOBPLAN. This JOBPLAN consists of entries such as inch or metric units, machine type, part ID, type of workpiece material, setup notes, and a description of the required tools.
This line of information describes the tool by number, type, and size and includes the appropriate cutting speed and feed rate. After all the selected tools are entered, the file is saved.
The second programming step is the making of the part. This represents a graphic modeling of the projected machining operation. After selecting a tool from the prepared JOBPLAN, parameters for the cutting operation are entered. For a drill, once the coordinate location of the hole and the depth are given, a circle appears on that spot. If the location is incorrect, the UNDO command erases this entry and allows you to give new values for this operation. When an end mill is being used, cutting movements (toolpath) are usually defined as lines and arcs. As a line is programmed, the toolpath is graphically displayed and errors can be corrected instantly.
At any time during programming, the command SHOWPATH will show the actual toolpath for each of the programmed tools. The tools will be displayed in the sequence in which they will be used during actual machining. If the sequence of a tool movement needs to be changed, a few keystrokes will to that.
Sometimes in CAM the programming sequence is different from the actual machining order. An example would be the machining of a pocket in a part. With CAM, the finished pocket outline is programmed first, then this outline is used to define the roughing cuts to machine the pocket. The roughing cuts are computer generated from inputs such as depth and width of cut and how much material to leave for the finish cut. Different roughing patterns can be tried out to allow the programmer to select the most efllcient one for the actual machining cuts. Since each tool is represented by a different color, it is easy to observe the toolpath made by each one.
A CAM system lets the programmer view the graphics model from varying angles, such as a top, front, side, or isometric view. A toolpath that looks correct from a top view, may show from a front view that the depth of the cutting tool is incorrect. Change
收藏