壓縮包內含有CAD圖紙和說明書,均可直接下載獲得文件，所見所得，電腦查看更方便。Q 197216396 或 11970985
一個有關移動機器人定位的視覺傳感器模型
Matthias Fichtner Axel Gro_mann
Arti_cial Intelligence Institute
Department of Computer Science
Technische Universitat Dresden
Technical Report WV-03-03/CL-2003-02
摘要
我們提出一個在走廊和傳感器模型凌亂的奧西環境下的概率估計。該模型是基于在相機中所獲得的圖像特性與本發明的特征的環境中的一個給定的三維幾何模型的比較。所涉及的技術比最先進的攝影測量方法還簡單。這使得模型用于概率機器人的定位方法中。此外，他非常適合傳感器融合。傳感器模型已經用于蒙特卡羅定位跟蹤的移動機器人位置導航任務里。實證結果提出了這個應用程序。
1 介紹
準確的本地化問題是移動機器人技術的基礎。為了成功的解決復雜的任務，自主機器人必須可以正確的可靠地估計其目前的狀態。該定位方法的選擇通常取決于傳感器的種類和號碼，有關操作環境的先驗知識，和可用的計算資源。最近，應用導航技術已經越來越受歡迎。在室內機器人的技術中，我們可以區分的方法是古人的攝影測量和計算機視覺，該方法起源于人工智能機器人。以視覺為基礎的導航技術的發展的一個重要的技術貢獻是通過識別來自未知的觀點在使用特征不變的特征單幅圖像的3D對象的工作。后來，這種技術拓展到全球定位和同步地圖建設。
最后系統進行位置跟蹤通過使用一個環境的幾何模型和統計模型的機器人的不確定性運動姿勢和吩咐。機器人的位置是由一個高斯分布表示，并通過卡爾曼濾波更新。尋找相應的攝像機圖像和模型的特點進行了優化，由此突出姿勢的不確定性為攝像機圖像。
在蒙特卡洛定位的基礎上，凝結算法已經成功的應用于導游機器人。這種基于視覺的貝葉斯過濾技術利用一個基于采樣的密度表示。在結論的對比中，他可以代表多峰概率分布。由于天花板的視覺地圖，它能定位全球范圍內使用標量的亮度測量機器人。結合了視覺距離特性和視覺地標在機器人中的應用程序提出了一個建立產線的方法。由于他們的方法依賴于專業的標志性建筑，它并不適用于一次環境。
我們工作的目的是開發一種概率傳感器模式的攝像機位置估計。給定一個3D幾何環境地圖，我們想近似測量當前相機圖像在某個地方獲得的機器人的工作環境。我們使用這個傳感器模型與MCL跟蹤在走廊移動機器人導航的位置?？赡艿脑挘部梢杂糜诙ㄎ辉陔s亂的辦公環境和基于形狀的物體的檢測。
一方面，我們結合攝影技術基于地圖的特征攝影與韌帶的靈活性和魯棒性，如處理本地化歧義的能力。另一方面，特征匹配操作應該足夠快，以允許傳感器融合。除了視覺輸入，我們想使用距離讀數從聲波和激光來提高定位精度。
本文組織如下。在第二節中，我們討論之前的工作。在第三節中，我們描述了視覺傳感器模型的組件。在第四節中，我們目前的實驗結果通過MCL位置跟蹤。我們的結論在第五節。
2 相關工作
在經典的基于模型的構成方法測定中，我們可以區分兩個相互關聯的問題。對應的問題是涉及到求相應的模型和圖像特征。這種映射發生之前，位置模型的模型特性生成使用給定的相機姿勢。據說特性可以匹配如果他們相互靠近。而造成的問題由3D相機坐標對世界起源的模型考慮到相對應的功能結束。顯然，有一個問題需要對方事先解決，這使得解決任何耦合問題非常困難。
上面的經典問題的解決方案如下假設—測試途徑：
（1） 給定一個攝像機位置估計，最佳匹配特征對群體提供初始猜測。
（2） 對于每一個假說，估計的相對相機的姿勢被給定計算誤差的函數最小化。
（3） 現在有一個更準確的姿勢估計用于每個假說，其余模型特性投射到的圖像與使用相機的姿勢有關。匹配的質量評估使用合適的誤差函數，在所有的假設收益率中排名。
（4） 排名最高的假設被選中。
注意，對應的問題解決步驟（1）和（3），構成問題（2）和（4）。
該算法的性能將取決于所使用的特征的類型，例如邊緣，線段，或色彩，以及圖像和模型之間的相似性度量的選擇，在這里被稱為誤差函數。線段是我們的選擇，因?yàn)樗麄兛梢栽诟淖児庹諚l件下被相對可靠地檢測到。作為世界模型，我們使用的操作環境是一個線框模型，在VRML中表示。設計一個合適的相似性度量是更加困難的。
原則上，誤差函數是基于取向差異相應行段在圖像和模型中，他們的距離和長度的差異，為了減少重要性，考慮到目前多有的功能對。這個已經建立在以下三種常見的措施中。3D被定義為模型線端點之間距離的總和和相應的平面。這一措施很大程度上依賴于與相機相反投影的距離。e2D稱為無限圖像行，是預測模型線的垂直距離對應的端點與無限延伸線在平面上的圖像。雙測度，e2D2，簡稱為在有限模型的線條，是總和超過所有的圖像線條端點對應在圖像平面奈特雷擴展模型的行。
圖1：視覺傳感器模型的處理步驟
限制搜索空間的匹配步驟，提出了限制可能的對應數量，對于一個給定的姿勢估計通過結合線特性引入感性結構。因?yàn)檫@些初始的對應是通過e2D1和e2D2評價很高的要求強加在初始姿態估計與圖像處理作業，包括去除失真和噪聲和特征提取的精度。假設在完整的長度下獲得所有可見模型。已經證明了一些異常值會嚴重影響最初的通訊，在老的原始方法中由于頻繁截斷引起的線路壞下，阻塞和雜物。
3 傳感器模型
我們的方法是出于這個問題是否解決通信問題的估計可以避免相機姿勢。相反，我們建議進行的圖像和模型的功能相對簡單，直接匹配。我們想調查的準確性和魯棒性是這種方式所能達到的水平。
參與本方法的處理步驟示于圖1.從相機中取出圖像失真后，我們用算子提取邊緣。這個操作符合在改變光照條件下提取。從邊緣線段確定結束點的坐標被忽略。在這種表示中，截斷或分割線將有類似的坐標在霍夫空間。同樣，行3D地圖投影到圖像平面使用攝像機姿態估計，并考慮到可見性約束，被表示為坐標空間。我們已經在匹配步驟中設計了幾種誤差函數被用來作為相似性度量。他們在下面描述。
中心匹配計數
該RST相似性度量是基于線段在霍夫空間的距離。我們認為只能在一個長方形細胞內的霍夫空間模型周圍為中心的功能，這些圖像特征作為可能匹配，對這些匹配結果進行計數，并由此對產生的總和歸一化。從模型特征來測量措施應該是不變的，就在3D地圖或是經營環境的變化不是模仿的對象。通過歸一化得到明顯特點的人數的不變性。具體而言，集中匹配計數測量SCMC被定義為：
其中未命名的使用距離參數的有效匹配。一般來說，這種相似性度量計算預期模型的比例至少由一個測量圖像點組成。注意，這里端點坐標和長度都不考慮。
網格長度匹配
所述第二相似性度量是基于行組的總長度值的比較。圖像中分割線條組合在一起使用一個統一的離散空間。這種方法類似于霍夫變換擬合的直線。執行相同的線路段的三維模型。讓測量線的長度落入網格單元，同樣根據模型，然后網格長度匹配測量是：
對所有包含模型的所有特性的網格單元，這種方法測量的長度與預期的來衡量。再次，該映射是有方向性的，也就是說，該模型被用作參考，以獲得噪聲，雜波和動態對象的不確定性。
近鄰和豪斯多夫距離
此外，我們嘗試了兩個通用的方法對兩組幾何實體的比較：近鄰和豪斯多夫距離。詳細信息請參閱【7】。都依賴于距離函數，我們基于離散坐標空間，即線路參數和可選的長度，線性和指數的方式。查看完整描述【5】。
常見的錯誤功能
為了比較，我們還實施了常用的誤差函數e3D,e2D1和e2D2，在笛卡爾空間中定義，我們代表行黑森符號xsinφ-ycosφ=d。通用誤差函數f，我們定義了相似度測量：
其中M是一組測量線，E是一組預期的行。在e2D1的情況下，f是由兩個模型之間的垂直距離線端點e1,e2，和無限擴展的圖像行定義為：
同樣，雙重相似性度量，通過使用誤差函數e2D2，基于圖像之間的垂直距離線端點和無限擴展行模式。
回憶的誤差函數e3D模型線端點的距離成正比，視圖平面通過一個圖像行和相機，我們可以使用f3D實例化方程定義為：
獲取概率
理想情況下，我們希望返回單遞減值的相似性度量方法用于預測模型的姿勢估計和實際偏離特性的姿勢估計。一般，我們的目標是在一個有效而簡單的視覺傳感器模型中，抽象的想法是特定的姿勢和環境條件平均了大量的，獨立的情況。對于公度，我們想表達模型機器人的相對坐標而不是絕對坐標。換句話說，我們假設測量m的概率，鑒于姿勢lm的這張照片姿勢估計W的世界模型，等于這測量三維姿勢偏差的概率和世界模型。
由視覺傳感器模型返回的概率是通過簡單的比例獲得：
4 實驗結果
我們已經在一系列實驗中提出了評估傳感器模型的相似措施。使用理想化條件下人為創建圖像，然后我們將扭曲和噪聲添加到測試圖像中。隨后，我們使用在走廊已經獲得的機器人真實圖像。最后，我們使用了傳感器模型穿越走廊跟蹤機器人的位置。在所有這些情況下，得到的三維可視化模型，他被用來評估解決方案。
模擬使用人為創造的圖像
作為第一種評價，我們生成的合成圖像特性通過從某個相機姿勢中生成一個視圖的模型。一般來說，我們從右分支到左邊重復圖1。通過引入帶來Δｌ，我們可以直接顯示其影響相似度值。對可視化的目的，平移偏差Δx和Δy組成一個空間偏差Δt。初步實驗顯示只有微不足道的差異時，他們被認為是獨立的。
圖2 :在人為創造的圖像中CMC的性能
對于每一個上面給出的相似性度量，至少1500萬個隨機相機姿勢加上一個隨機造成偏差的范圍構成收益率模型。中央軍委測量的結果如圖2所示。使用GNUPLOT的平滑算子得到表面的3D圖。我們注意到一個獨特的峰值在零偏差處理單遞減相似性值誤差增加。請注意，這個簡單的測量認為端點坐標和長度的行。然而，我們已經取得了良好的結果。
而由此產生的GLM，CMC類似于一個標準曲線，峰值則更加與眾不同。這符合我們的預期，因?yàn)樵谶@里考慮到圖像和模型線非常的重要。與中央的測量相比，在這種方法中會有偶然的錯誤匹配，由于不同的長度。
緊鄰的衡量是不使用的。雖然線性和指數加權方案嘗試，即使考慮到線段的長度，沒有獲得獨特的高峰，在進一步考慮中導致其被排除。
基于豪斯多夫距離測量的表現不如前兩個，CMC和GLM，但是它的方式是所需要的。但其溫和的表現并不支付其最長的計算時間消耗在所有提出的措施中，并隨后被忽視。到目前為止，我們已經表明我們的相似性措施可執行。接下來，我們將使用誤差函數在這個框架中。在我們的設置函數e2D1表現很好。由此產生的曲線非常相似措施GLM中的曲線。這兩種方法都表現出一種獨特的峰值在正確的位置姿態中偏差為零。注意，線段的長度直接影響測量返回的相似度值，雖然兩個線性屬性有助于衡量e2D1。令人驚訝的是，其他兩個誤差函數e2D2和e3D表現不佳。
更現實的條件
在我們的傳感器模型中為了排除扭曲和嘈雜的圖像數據，我們描述進行另一組實驗。為此，我們應用一下所有綜合誤差模型生成的圖像特征匹配模型特性。每個原始行被復制的小概率（p值=0.2），并移入空間。任何線路長度超過30 像素被分成以概率p=0.3.此外，設有不存在于模型和噪聲通過添加隨機線條圖像中的均勻分布進行了模擬。本方向是根據電流分布的角度產生相當?shù)牡湫吞卣鳌?
從第一組實驗中，這些模擬的結果沒有顯著地差異。相似度在零偏差的最大值降低，所有的形狀和特征相似性措施仍在考慮保持不變。
使用真實的走廊照片
對現實世界的情況自上述模擬結果可能是有問題的，我們進行了另一組實驗取代合成特性測量的實際相機圖像。比較結果為各種參數設置，我們收集圖片2在先驅機器人在走廊上離線和記錄功能。對于走廊示例典型的觀點，機器人姿態在三維空間中的兩個不同的位置幾乎被離散化。后將手動機器人在每個頂點歸零，它執行一個完整的當場將逐步記錄圖像。這樣可以確保最高的準確性造成坐標和圖像想關聯。這樣，已經有超過3200張圖片收集到64個不同的位置（x,y）。同樣以上面的模擬，對姿勢進行了系統選擇從所涵蓋的測量范圍內。通過傳感器模型指的姿態偏差Δl中的相同的離散值計算出的值，根據公式2中的假設進行平均。
圖3：GLM對從走廊真實圖像中表現
結果可視化的相似性度量空間（x,y）和旋轉偏離正確的相機姿態CMC衡量展覽一個獨特的峰值約零點誤差。當然，由于數量小得多的數據樣本相對于模擬使用合成數據，曲線的形狀更崎嶇不平，但這是符合我們的期望。
采用此設置中的GLM措施的結果示于圖3。因?yàn)樗沂玖艘粋€更獨特的峰值相比，CMC的曲線，他或多或少的演示了特征圖譜之間的比較，考慮到了線路的長度。
蒙特卡洛本地化使用了視覺傳感器模型
我們的目標是設計一個概率傳感器相機安裝在移動機器人的模型上，我們繼續呈現的結果應用到移動機器人的本地化上。
傳感器的通用接口模型允許它用于貝葉斯本地化方法的校正步驟，例如，標準版的蒙特卡洛本地化算法。統計獨立以來，傳感器讀書中呈現了一個基本假設線，我們希望的是使用相機來代替獲得更高的準確度和魯棒性除了常用的距離傳感器還有聲吶獲激光。
圖4 ：本地化圖像和預測模型
在走廊實驗中，移動機器人配備了固定安裝的CCD相機必須按照預定的路線形狀的雙重循環。途中，他必須停在八個預定義的位置，或者打開視圖在附近的一個角落里。每個圖像捕獲啟動MCL的所謂校正步驟和所有樣本的權重，根據該傳感器模型重新計算，收益率密度最高的樣品可能在重新采樣正確的姿勢坐標。在上述預測步驟中，將整個樣本集根據機器人的運動模型和當前測距傳感器的讀數移入空間。
我們的初步結果看起來很有希望。在位置跟蹤實驗中，機器人被賦予了其開始位置的估計值，大部分時間里，機器人的位置假設在最好的姿勢。在這個實驗中，我們已經使用了CMC措施，在圖4中，一個典型的相機如圖所示，而機器人如下所示請求路徑?；叶燃増D像描繪了視覺輸入的失真排除和預處理后的特征提取，也顯示提取線特征。此外，世界模型是根據兩個伸出姿勢，該測距跟蹤的構成和通過MCL計算出的估計值，他大約對應于正確的姿勢，在他們之間，我們觀察和旋轉誤差。
畫面還顯示，旋轉誤差對巧合特性有很強的影響程度。對應于上述給出的結果，數據表現出旋轉偏差比平移偏差表現出更高的梯度。這一發現可以解釋出運動裸關節的功能空間，因此我們的相機傳感器模型將在檢測旋轉中個出現分歧。像我們的先鋒軸承旋轉測程法遠高于平移誤差，這個屬性使它特別適用于雙輪驅動的機器人。
5 結論和未來的工作
我們已經提出了一個概率傳感器模型攝像機位置估計。通用的設計使得它適合與距離傳感器融合來感知來自其他的傳感器。在理想和現實的條件下，我們展示了廣泛的模擬和確定了合適的相似性度量。傳感器模型的本地化任務的移動機器人的申請符合我們的預測偏差。在本文中我們強調了很多可以改進的空間。
我們正在研究合適的技術來定量地評價定位算法的設計傳感器模型的移動機器人的性能。這將使我們能夠嘗試雜亂的環境和動態對象。結合相機傳感器模型使用的距離傳感器融合信息呈現強勁的下一個步驟和導航。因?yàn)橛杏玫墓δ軘?shù)量顯著變化作為機器人穿越室內環境，這個想法駕馭相機對準更豐富的視圖（主動視覺）提供了一個很有前途的研究路徑，以及強大的導航功能。
參考文獻
[1] F. Dellaert, W. Burgard, D. Fox, and S. Thrun. Using the condensation algorithm for robust, vision-based mobile robot localisation. In Proc. of the IEEE Conf. on Computer Vision and Pattern Recognition, 1999.
[2] D. DeMenthon, P. David, and H. Samet. SoftPOSIT: An algorithm for registration of 3D models to noisy perspective images combining Softassign and POSIT. Technical report, University of Maryland, MD, 2001.
[3] G. N. DeSouza and A. C. Kak. Vision for mobile robot navigation: A survey. IEEE Trans. on Pattern Analysis and Machine Intelligence, 24(2):237{267, 2002.
[4] S. Enderle, M. Ritter, D. Fox, S. Sablatnog, G. Kraetzschmar, and G. Palm. Soccer-robot localisation using sporadic visual features. In Intelligent Autonomous Systems 6, pages 959{966. IOS, 2000.
[5] M. Fichtner. A camera sensor model for sensor fusion. Master's thesis, Dept. of Computer Science, TU Dresden, Germany, 2002.
[6] S. A. Hutchinson, G. D. Hager, and P. I. Corke. A tutorial on visual servo control. IEEE Trans. on Robotics and Automation, 12(5):651{ 670, 1996.
[7] D. P. Huttenlocher, G. A. Klanderman, and W. J. Rucklidge. Comparing images using the Hausdor_ distance. IEEE Trans. on Pattern Analysis and Machine Intelligence, 15(9):850{863, 1993.
[8] A. Kosaka and A. C. Kak. Fast vision-guided mobile robot navigation using model-based reasoning and prediction of uncertainties. Com- puter Vision, Graphics, and Image Processing { Image Understanding, 56(3):271{329, 1992.
[9] R. Kumar and A. R. Hanson. Robust methods for estimating pose and a sensitivity analysis. Computer Vision, Graphics, and Image Processing { Image Understanding, 60(3):313{342, 1994.
[10] D. G. Lowe. Three-dimensional object recognition from single twodimensional images. Arti_cial Intelligence, 31(3):355{395, 1987.
[11] S. Se, D. G. Lowe, and J. Little. Vision-based mobile robot localization and mapping using scale-invariant features. In Proc. of the IEEE Int. Conf. on Robotics and Automation, pages 2051{2058, 2001.
[12] G. D. Sullivan, L. Du, and K. D. Baker. Quantitative analysis of the viewpoint consistency constraint in model-based vision. In Proc. of the 4th Int. IEEE Conf. on Computer Vision, pages 632{639, 1993.
- 12 -
任務書
題目
多用途輪式自動行走小車
論文時間
20**年 2月 24日 至 20**年6 月14 日
課題的
主要內容及要求
（含技術要求、圖標要求等）
內容：設計一輪式行走方式的自動行走小車，作為多用途的實驗用載體平臺，可在其上進一步安裝多種作業機械，如收獲機械手等其他機構，滿足在田間和硬質土地路面行走的要求，在此機械產品基礎上，加裝電氣控制機構，可達到自動行走進和遙控行走的功能。
要求：1行走速度：≤1m/s
2負載能力：≤100kg
3行走方式：輪式
4防碰撞探測：機械方式
5工作平臺提升方式：半閉環控制機械方式提升
6工作平臺提升高度：500mm
7外形尺寸：寬≤600mm
課題實施的方法、步驟及工作量要求
1. 查閱有關資料，了解國家或行業對自動行走小車的要求等；
2. 確定試驗方案，擬定輪式自動行走小車的機械部分結構設計；
3. 確定工程圖樣，完成零件圖，裝配圖和總裝圖，完成圖紙工作量累計3張A0圖紙以上；
4. 完成外文翻譯漢子3000以上；
5. 完成設計說明書1萬字以上；
指定參考
文獻
[1] 廖權來等.《電動汽車的關鍵技術及發展對策》. 中國機械工程[M] ,1998
[2] 劉麗.《世界電動汽車最新發展綜述》[J].汽車電器.1993
[3] 時瑞祥.《氫氣發動機小型內燃機》[M].1994
[4] 王文清.《世界汽車工業發展趨勢》[J].汽車電器 1991
[5] 張準、汪鳳泉編著,《振動分析》[M].東南大學出版社 1991.
[6] 崔存.《現代汽車新技術》[M].人民交通出版社
[7] 廖大方、王志金譯.《未來汽車技術》[J].武漢汽車工業大學科技情報所
[8] 劉巖、丁玉蘭、林逸.《汽車高速振動仿真與試驗研究》[M].2000.17
[9] 魯麥特《車輛動力學—模擬及其方法》[J]北京理工大學出版社 2002
[10] 龐勇、賀益康.《基于專用控制芯片的永磁無刷直流電機控制器》[J]1999
[11] 侯志祥、李小穎.《我國21世紀電動汽車發展的對策交道科技》2002
[12]《牽引用鉛酸蓄電池產品品種和規格標準》[J ] GB 7403.2 1987
畢業設計（論文）進度計劃（以周為單位）
第1周（20**年2月24日----20**年2月28日）：
下達設計任務書，明確任務，熟悉課題，收集資料，上交外文翻譯、參考文獻和開題報告；
第2周--第3周（20**年3月3日--20**年3月14日）：
根據本課題的要求，制定總體方案，繪制草圖；
第4周--第5周（20**年3月17日--20**年3月28日）：
完成設計方案，擬定自動行走小車的設計草圖；
第6周--第7周（20**年3月31日--20**年4月11日）：
完成自動小車的設計總圖及有關零件設計圖；
第8周（20**年4月14日--20**年4月18日）：
提交第1-8周的《指導記錄表》和已做的畢業設計內容，由指導老師初審后上交學院
第9周--第13周（20**年4月21日--20**年5月23日）：
在指導老師的指導下修改并完成設計，完成相關設計圖紙，同時撰寫畢業設計說明書，并提交指導老師初審；
第14周--第16周（20**年5月26日--20**年6月14日）：
修改畢業設計圖紙及說明書，完成后參加畢業答辯；
備注
注：表格欄高不夠可自行參加。此表由指導老師在畢業設計（論文）工作開始前填寫，每位畢業生兩份，一份發給學生，一份交院(系)留存。
A Visual-Sensor Model for Mobile Robot Localisation
Matthias Fichtner Axel Gro_mann
Arti_cial Intelligence Institute
Department of Computer Science
Technische Universitat Dresden
Technical Report WV-03-03/CL-2003-02
Abstract
We present a probabilistic sensor model for camera-pose estimation in hallways and cluttered o_ce environments. The model is based on the comparison of features obtained from a given 3D geometrical model of the environment with features present
in the camera image. The techniques involved are simpler than state-of-the-art photogrammetric approaches. This allows the model to be used in probabilistic robot localisation methods. Moreover, it is very well suited for sensor fusion. The sensor model has been used with Monte-Carlo localisation to track the position of a mobile robot in a hallway navigation task. Empirical results are presented for this application.
1 Introduction
The problem of accurate localisation is fundamental to mobile robotics. To solve complex tasks successfully, an autonomous mobile robot has to estimate its current pose correctly and reliably. The choice of the localization method generally depends on the kind and number of sensors, the prior knowledge about the operating environment, and the computing resources available. Recently, vision-based navigation techniques have become increasingly popular [3]. Among the techniques for indoor robots, we can distinguish methods that were developed in the _eld of photogrammetry and computer vision, and methods that have their origin in AI robotics.
An important technical contribution to the development of vision-based navigation
techniques was the work by [10] on the recognition of 3D-objects from unknown viewpoints in single images using scale-invariant features. Later, this technique was extended to global localisation and simultaneous map building [11].
The FINALE system [8] performed position tracking by using a geometrical model of the environment and a statistical model of uncertainty in the robot's pose given the commanded motion. The robot's position is represented by a Gaussian distribution and updated by Kalman _ltering. The search for corresponding features in camera image and world model is optimized by projecting the pose uncertainty into the camera image.
Monte Carlo localisation (MCL) based on the condensation algorithm has been applied successfully to tour-guide robots [1]. This vision-based Bayesian _ltering technique uses a sampling-based density representation. In contrast to FINALE, it can represent multi-modal probability distributions. Given a visual map of the ceiling, it localises the robot globally using a scalar brightness measure. [4] presented a vision-based MCL approach that combines visual distance features and visual landmarks in a RoboCup application. As their approach depends on arti_cial landmarks, it is not applicable in o_ce environments.
The aim of our work is to develop a probabilistic sensor model for camerapose estimation. Given a 3D geometrical map of the environment, we want to find an approximate measure of the probability that the current camera image has been obtained at a certain place in the robot's operating environment. We use this sensor model with MCL to track the position of a mobile robot navigating in a hallway. Possibly, it can be used also for localization in cluttered o_ce environments and for shape-based object detection.
On the one hand, we combine photogrammetric techniques for map-based feature projection with the exibility and robustness of MCL, such as the capability to deal with localisation ambiguities. On the other hand, the feature matching operation should be su_ciently fast to allow sensor fusion. In addition to the visual input, we want to use the distance readings obtained from sonars and laser to improve localisation accuracy.
The paper is organised as follows. In Section 2, we discuss previous work. In Section 3, we describe the components of the visual sensor model. In Section 4, we present experimental results for position tracking using MCL. We conclude in Section 5.
2 Related Work
In classical approaches to model-based pose determination, we can distinguish two interrelated problems. The correspondence problem is concerned with _nding pairs of corresponding model and image features. Before this mapping takes place, the model features are generated from the world model using a given camera pose. Features are said to match if they are located close to each other. Whereas the pose problem consists of _nding the 3D camera coordinates with respect to the origin of the world model given the pairs of corresponding features [2]. Apparently, the one problem requires the other to be solved beforehand, which renders any solution to the coupled
problem very di_cult [6].
The classical solution to the problem above follows a hypothesise-and-test approach:
(1) Given a camera pose estimate, groups of best matching feature pairs provide initial guesses (hypotheses).
(2) For each hypothesis, an estimate of the relative camera pose is computed by minimising a given error function de_ned over the associated feature pairs.
(3) Now as there is a more accurate pose estimate available for each hypothesis, the remaining model features are projected onto the image using the associated camera pose. The quality of the match is evaluated using a suitable error function, yielding a ranking among all hypotheses.
(4) The highest-ranking hypothesis is selected.
Note that the correspondence problem is addressed by steps (1) and (3), and the pose problem by (2) and (4).
The performance of the algorithm will depend on the type of features used, e.g., edges, line segments, or colour, and the choice of the similarity measure between image and model, here referred to as error function. Line segments is the feature type of our choice as they can be detected comparatively reliably under changing illumination conditions. As world model, we use a wire-frame model of the operating environment, represented in VRML. The design of a suitable similarity measure is far more difficult.
In principle, the error function is based on the di_erences in orientation between corresponding line segments in image and model, their distance and difference in length, in order of decreasing importance, in consideration of all feature pairs present. This has been established in the following three common measures [10]. e3D is defined by the sum of distances between model line endpoints and the corresponding plane given by camera origin and image line. This measure strongly depends on the distance to the camera due to back-projection. e2D;1, referred to as in_nite image lines, is the sum over the perpendicular distances of projected model line endpoints to
corresponding, in_nitely extended lines in the image plane. The dual measure, e2D;2, referred to as in_nite model lines, is the sum over all distances of image line endpoints to corresponding, in_nitely extended model lines in the image plane.
To restrict the search space in the matching step, [10] proposed to constrain the number of possible correspondences for a given pose estimate by combining line features into perceptual, quasi-invariant structures beforehand. Since these initial correspondences are evaluated by e2D;1 and e2D;2, high demands are imposed on the accuracy of the initial pose estimate and the image processing operations, including the removal of distortions and noise and the feature extraction. It is assumed to obtain all visible model lines at full length. [12, 9] demonstrated that a few outliers already can severely affect the initial correspondences in Lowe's original approach due to frequent truncation of lines caused by bad contrast, occlusion, or clutter.
3 Sensor Model
Our approach was motivated by the question whether a solution to the correspondence problem can be avoided in the estimation of the camera pose. Instead, we propose to perform a relatively simple, direct matching of image and model features. We want to investigate the level of accuracy and robustness one can achieve this way.
The processing steps involved in our approach are depicted in Figure 1. After removing the distortion from the camera image, we use the Canny operator to extract edges. This operator is relatively tolerant to changing illumination conditions. From the edges, line segments are identi_ed. Each line is represented as a single point (_; _) in the 2D Hough space given by _ = x cos _ + y sin _. The coordinates of the end points are neglected. In this representation, truncated or split lines will have similar coordinates in the Hough space. Likewise, the lines in the 3D map are projected onto the image plane using an estimate of the camera pose and taking into account the
visibility constraints, and are represented as coordinates in the Hough space as well. We have designed several error functions to be used as similarity measure in the matching step. They are described in the following.
Centred match count (CMC)
The first similarity measure is based on the distance of line segments in the Hough space. We consider only those image features as possible matches that lie within a rectangular cell in the Hough space centred around the model feature. The matches are counted and the resulting sum is normalised. The mapping from the expectation (model features) to the measurement (image features) accounts for the fact that the measure should be invariant with respect to objects not modelled in the 3D map or unexpected changes in the operating environment. Invariance of the number of visible features is obtained by normalisation. Speci_cally, the centred match count measure
sCMC is defined by:
where the predicate p de_nes a valid match using the distance parameters (t_; t_) and the operator # counts the number of matches. Generally speaking, this similarity measure computes the proportion of expected model Hough points hei 2 He that are con_rmed by at least one measured image Hough point hmj 2 Hm falling within tolerance (t_; t_). Note that neither endpoint coordinates nor lengths are considered here.
Grid length match (GLM)
The second similarity measure is based on a comparison of the total length values of groupes of lines. Split lines in the image are grouped together using a uniform discretisation of the Hough space. This method is similar to the Hough transform for straight lines. The same is performed for line segments obtained from the 3D model. Let lmi;j be the sum of lengths of measured lines in the image falling into grid cell (i; j), likewise lei;j for expected lines according to the model, then the grid length match measure sGLM is de_ned as:
For all grid cells containing model features, this measure computes the ratio of the total line length of measured and expected lines. Again, the mapping is directional, i.e., the model is used as reference, to obtain invariance of noise, clutter, and dynamic objects.
Nearest neighbour and Hausdorf distance
In addition, we experimented with two generic methods for the comparison of two sets of geometric entities: the nearest neighbour and the Hausdor_ distance. For details see [7]. Both rely on the de_nition of a distance function, which we based on the coordinates in the Hough space, i.e., the line parameter _ and _, and optionally the length, in a linear and exponential manner. See [5] for a complete description.
Common error functions
For comparisons, we also implemented the commonly used error functions e3D, e2D;1, and e2D;2. As they are de_ned in the Cartesian space, we represent lines in the Hessian notation, x sin _ ?? y cos _ = d. Using the generic error function f, we de_ned the similarity measure as:
where M is the set of measured lines and E is the set of expected lines. In case of e2D;1, f is de_ned by the perpendicular distances between both model line endpoints, e1, e2, and the in_nitely extended image line m:
Likewise, the dual similarity measure, using e2D;2, is based on the perpendicular
distances between the image line endpoints and the in_nitely extended model line.
Recalling that the error function e3D is proportional to the distances of model line endpoints to the view plane through an image line and the camera origin, we can instantiate Equation 1 using f3D(m; e) de_ned as:
where ~nm denotes the normal vector of the view plane given by the image endpoints ~mi = [mx;my;w]T in camera coordinates.
Obtaining probabilities
Ideally, we want the similarity measure to return monotonically decreasing values as the pose estimate used for projecting the model features departs from the actual camera pose. As we aim at a generally valid yet simple visual-sensor model, the idea is to abstract from speci_c poses and environmental conditions by averaging over a large number of di_erent, independent situations. For commensurability, we want to express the model in terms of relative robot coordinates instead of absolute world coordinates. In other words, we assume
to hold, i.e., the probability for the measurement m, given the pose lm this image has been taken at, the pose estimate le, and the world model w, is equal to the probability of this measurement given a three-dimensional pose deviation 4l and the world model w.
The probability returned by the visual-sensor model is obtained by simple scaling:
4 Experimental Results
We have evaluated the proposed sensor model and similarity measures in a series of experiments. Starting with arti_cially created images using idealized conditions, we have then added distortions and noise to the tested images. Subsequently, we have used real images from the robot's camera obtained in a hallway. Finally, we have used the sensor model to track the position of the robot while it was travelling through the hallway. In all these cases, a three-dimensional visualisation of the model was obtained, which was then used to assess the solutions.
Simulations using arti_cially created images
As a first kind of evaluation, we generated synthetic image features by generating a view at the model from a certain camera pose. Generally speaking, we duplicated the right-hand branch of Figure 1 onto the left-hand side. By introducing a pose deviation 4l, we can directly demonstrate its inuence on the similarity values. For visualisation purposes, the translational deviations 4x and 4y are combined into a single spatial deviation 4t. Initial experiments have shown only insigni_cant di_erences when they were considered independently.
Fig. 2: Performance of CMC on arti_cially created images.
For each similarity measure given above, at least 15 million random camera poses were coupled with a random pose deviation within the range of 4t < 440cm and 4_ < 90_ yielding a model pose.
The results obtained for the CMC measure are depicted in Figure 2. The surface of the 3D plot was obtained using GNUPLOT's smoothing operator dgrid3d. We notice a unique, distinctive peak at zero deviation with monotonically decreasing similarity values as the error increases. Please note that this simple measure considers neither endpoint coordinates nor lengths of lines. Nevertheless, we obtain already a decent result.
While the resulting curve for the GLM measure resembles that of CMC, the peak is considerably more distinctive. This conforms to our anticipation since taking the length of image and model lines into account is very signi_cant here. In contrast to the CMC measure, incidental false matches are penalised in this method, due to the differing lengths.
The nearest neighbour measure turned out to be not of use. Although linear and exponential weighting schemes were tried, even taking the length of line segments into account, no distinctive peak was obtained, which caused its exclusion from further considerations.
The measure based on the Hausdor_ distance performed not as good as the first two, CMC and GLM, though it behaved in the desired manner. But its moderate performance does not pay off the longest computation time consumed among all presented measures and is subsequently disregarded.
So far, we have shown how our own similarity measures perform. Next, we demonstrate how the commonly used error functions behave in this framework.
The function e2D;1 performed very well in our setting. The resulting curve closely resembles that of the GLM measure. Both methods exhibit a unique, distinctive peak at the correct location of zero pose deviation. Note that the length of line segments has a direct e_ect on the similarity value returned by measure GLM, while this attribute implicitly contributes to the measure e2D;1, though both linearly. Surprisingly, the other two error functions e2D;2 and e3D performed poorly.
Toward more realistic conditions
In order to learn the e_ect of distorted and noisy image data on our sensor model, we conducted another set of experiments described here. To this end, we applied the following error model to all synthetically generated image features before they are matched against model features. Each original line is duplicated with a small probability (p = 0:2) and shifted in space. Any line longer than 30 pixel is split with probability p=0:3. A small distortion is applied to the parameters (_; _; l) of each line according to a random, zeromean Gaussian. Furthermore, features not present in the model and noise are simulated by adding random lines uniformly distributed in the image. Hereof, the orientation is drawn according to the current distribution of angles to yield fairly `typical' features.
The results obtained in these simulations do not di_er significantly from the first set of experiments. While the maximum similarity value at zero deviation decreased, the shape and characteristics of all similarity measures still under consideration remained the same.
Using real images from the hallway
Since the results obtained in the simulations above might be questionable with respect to real-world conditions, we conducted another set of experiments replacing the synthetic feature measurements by real camera images.
To compare the results for various parameter settings, we gathered images with a Pioneer 2 robot in the hallway o_-line and recorded the line features. For two di_erent locations in the hallway exemplifying typical views, the three-dimensional space of the robot poses (x; y; _) was virtually discretized. After placing the robot manually at each vertex (x; y; 0), it performed a full turn on the spot stepwise recording images. This ensures a maximum accuracy of pose coordinates associated with each image. That way, more than 3200 images have been collected from 64 di_erent (x; y) locations. Similarly to the simulations above, pairs of poses (le; lm) were systematically chosen
Fig. 3: Performance of GLM on real images from the hallway.
from with the range covered by the measurements. The values computed by the sensor model referring to the same discretized value of pose deviation 4l were averaged according to the assumption in Equation 2.
The resulting visualisation of the similarity measure over spatial (x and y combined) and rotational deviations from the correct camera pose for the CMC measure exhibits a unique peak at approximately zero deviation. Of course, due to a much smaller number of data samples compared to the simulations using synthetic data, the shape of the curve is much more bumpy, but this is in accordance with our expectation.
The result of employing the GLM measure in this setting is shown in Figure 3. As it reveals a more distinctive peak compared to the curve for the CMC measure, it demonstrates the increased discrimination between more and less similar feature maps when taking the lengths of lines into account.
Monte Carlo Localisation using the visual-sensor model
Recalling that our aim is to devise a probabilistic sensor model