帶減速器的電機裝置驅動設計
帶減速器的電機裝置驅動設計,減速器,電機,機電,裝置,驅動,設計
Original text：
X-RAY DETECTS WELDS AND MECHANICAL STRUCTURE DAMAGE MATHODS’SUMMARIZE
The moving small object detection in image is always a difficult problem in field of image processing, which applies in many fields, such as industrial detection and medical detection. The defects, such as blowholes and incomplete penetration, occasionally appear in the welding process. These defects can affect the quality and the security of products. Therefore, defects detection in welding seam is extremely important. Now, the on-line detection of defects in the weld is still done by human interpreter. However, this process is subjective, inconsistent, labor intensive and fatigue of interpreter. It is desirable to find an effective automatic defects detection method to assist human interpreter in evaluating the quality of weld and to make the on-line detection objective, standard and intelligent. Our research is based on this.
We have studied the automatic defects detection in the weld seam and mainly done the following research :(1) There is much redundant background information for the defects detection in the image. Therefore we use an automatically abstracting method of weld area based on the auto- adapted threshold segmentation. This method can reduce the computation and increase the precision. (2) The SUSAN algorithm has good anti-noise ability, which can recognize the image edge very well. So we have studied a defects detection method based on SUSAN algorithm, which associated with the morphology operation. The results indicate that this method is effective.(3) Wavelet analysis method has a very good localization characteristic, which can focus on the arbitrary detail of the analyzed object. Therefore, we studied a method using wavelet decomposition to get the shape and position information of the defects. Then we use the wiener filter and morphology method to complete the detection.
The automatic flaw detection of welded tubes is one of the most important steps to ensure the quality of the tubes. Nondestructive inspection on welding seam of tube is required in the tube production, and real time X-Rayradiography inspection is an effective means. Along with continuous improvement of the productive ratio, the demand for the automatic inspection to the welding seam becomes more and more pressing, so implementation of the automatic inspection possesses important significance on both theory and reality. Wavelet transform is a powerful tool in the signal and image processing, and its fundamental theory has been formed. From the view of engineering applications, however, the wavelet transform is still in the elementary stage, the further
Researches are required for the practical uses. In this thesis, we concentrate mainly on using wavelet analysis for welding seam image processing and recognition, and some related techniques are developed.
For constructing welding seam positioning and detection control system, the multiple computers configuration for weld seam image recognition is proposed. The system adopts the architecture in which multiple CPUs process parallels under the control of the master IPC computer. The system can perform storing the weld seam images, positioning, flaws recognizing and quality prejudging. The Watch-Dog interface card is successfully developed; it can improve the system reliability by redundancies technique of saving breakpoint data and restoring them.
The hardware supporting the system makes use of the high speed digital signal processor TMS320C30 from Tax ax Instruments Company. The frame grabber can capture 25 frames of welding seam image per second continuously and make it possible to fulfill the real time welding seam image processing Andre cognition. The one kind of improved FWT (Fast Wavelet Transform) algorithm for a finite sequence is proposed after studying theory of mustier solution analysis
and analyzing technical characteristics of DSP. The implementation of the
periodic extension of the FWT on DSP is described in detail and the corresponding FWT assembly code is described for the DSP TMS320C3X series.
This dissertation suggests scheme of image demonizing based on two-dimensional discrete wavelet transform. The demonizing algorithm is described with some operators. By threshold the wavelet transform coefficients’ of noisy images, the original image can be reconstructed correctly. Different threshold selections and threshold methods are discussed. The new robust local threshold scheme is proposed. Quantifying the performance of image demonizing schemes by using the mean square error, the performance of the robust local threshold scheme
is demonstrated and is compared with the universal threshold scheme. The experiment shows that image demonizing using the robust local threshold performs better than that using the universal threshold.
In order to improve the accuracy and the real time performance of edge detection, a method need to be found to match the detection of low contrast blurred welding seam image. This dissertation analyzed the main sources of noise as well as the different characteristics of noise and signal under wavelet transform, and proposed a Moultrie solution edge detection method based on wavelet transform.
The experimental results show the effect of this algorithm is advantageous over that of traditional edge detection algorithm.
The geometrical relation of elliptic imaging is studied for welding seam image of the butt welds in straight tubes. The region model of welding seam image is proposed, It furnishes a evidence theory to further process to welding seam image. Combining with the region model, a model-based adaptive target segmentation algorithm is proposed. One basis of the algorithm is Otsu's discriminates criterion. The adaptive target segmentation of welding seam image is realized. The effect of target image segmentation is quite well.
The difficult problem of target flaw automatic recognition in welding seam image is analyzed. Using for reference the consciousness organizing process of the human vision system, a knowledge-based target recognition algorithm with mufti-feature fusion, mufti-window architecture and mustier solution is presented. With the help of certain prior knowledge, criteria and means of artificial intelligence, target flaws are extracted and recognized quite well. It is a Prospecting intelligent recognition algorithm.
The fast feature extraction algorithm for target geometrical feature is proposed. This algorithm is different from usual feature extraction methods which first need to change a gray image into binary image. The algorithms proposed get the feature of a image in the gray image directly. Using this algorithm can fast extract features of target flaws in welding seam image.
All kinds of mechanical devices and structure tend to become large-scale and high efficient with the industry developing and progress of science and technology. The mechanical devices and structure become very complex to meet the need of industry. The structure or devices are damaged is couldn't avoided during working under complex load and working for a long time. The loss caused by crash, fatigue, eroding and wear is about 6%一8% of GDP of USA and Japan. In our country, accident number of structural damage is 10 times as many as that in, intense industrialization country in eighties of last century. In 1986, the loss is 12 hundred million $ caused by the space shuttle named '`challenger" of U.S.A. crashed. In 1985，the accident cause of joint of electromotor set of Datong power plane crashed, In 1988, the accident cause of main beam of electromotor set of Qianlong power plane crashed, those accident cause of loss near 1 hundred million RMB. In our country, 6 serious accidents ware been caused by rotor of over 50Mw electromotor set damaged badly during 1984 to 1991.Therefore, the study the theory and technique about large scale and complex mechanical devices and structure online inspect and early fault diagnosis is urgent task. Especially, how to detect the fault of structure as early as possible is engineers most want to do. But it is very difficult that faint signal produced by early fault is recognized.
The research reports of our country and overseas show that at present the study of structure damage inspect by vibration characteristics carry out most on the simple and symmetry structure just as beam and frame etc. and result is given based on finite element numeric calculation. But the structure and join of practical device is quite complex, it is impossible modeling the practical device reliably by FE. So that realizing complex industrial device inspect online and early fault diagnosis by using vibrate testing technique is a problem that wants to be solved urgently.
Fault diagnosis technique is intercross subject. Especially, the base in theory of fault diagnosis of complex system is provided based on modern control theory, signal processing, pattern recognition, optimum method, decision-making and manual intelligent are developed rapidly.
Structure damage detection is a research project that has wide background of industrial application. But realizing large-scale and complex structure damage inspect online is depend on techniques such as development of accurate testing technique and signal processing method, based on getting to the best advantage mix model of structure damage detection, the sensors escape placed on structure reasonably and optimally
The large-scale vibrating device as a researched object, the method structure damage detection is studied. In general NDT technique such ultrasonic test, ray test, magnetism applied in modeling offline mostly. The project test and scheme pervade test etc. are vibrate properties and structure damage characteristics from platitudinous: offline tests and analysis to structure as impotent information of online automatic fault diagnosis database. Then the method of few-testing, points modeling to getting structure damage information has beer researched. Placing sensors reasonably and realizing large-scale an Complex structure damage inspect online are targets of this project.
The large-scale vibrating screen has been applied widely in coax industry and other industrial areas as a kind of important device. A: vibration mechanical device, it works very hardly and works in verb wretched environment so that the beam of screen is damaged easily
Therefore, it is very important how to detect the fault of beam as early a possible to make the repair schedule reasonably and economically and to avoid the body hurt and device damage.
In this thesis, how can locate a damaged beam of screen is studied serially. The regulation of beam vibration characteristics change depend on damage degree of beam is found. Also the regulation of whole screen vibration characteristics change depend on damage degree of beam is found too. Based on deep research about beam vibration characteristics change regulation and whole screen vibration characteristics change regulation in series, we can get the optimum place to placed sensors for location which beam is damaged.
The target of the thesis is combine the on-line dynamically inspect screen for structure damage with accurately locate fault by acoustic emission technique.
The main content of this thesis consist of (1) Based on modal parameters recognition of whole screen, get location of damaged substructure. (2) Locate fault of substructure accurately by acoustic emission technique. (3)Carry on research about finding a efficient way we can inspect screen for structure damage on-line.
These projects are done step by step. At first, free-free beam vibration characteristics are studied deeply. The first rank and second rank bending vibration modal shape of beam are abstracted as research objects. The study result is shown that the frequencies of FRF peak value drift toward lower frequency and the amplitudes of FRF peak value increase with the damage degree of beam. Then the first rank and second rank bending vibration characteristics of beam fixed on screen are studied. The change regulations of characteristics of FRF with beam damage are agreement to that of free-free beam. Therefore the damage information of beam can be gotten from FRF. The wavelet packet analysis method and spectral analysis calculation method are employed in frequency response and transmissibility processing. The fault characteristics are abstracted. After then, the damaged beam has an effect on whole screen vibration characteristics are researched. From above work, the damaged beam of screen could be located from whole screen. Then the acoustic emission technique is used to locate fault of the damaged beam accurately. Because the too many sensors couldn't place on the working screen so that we must find limited positions to place sensors getting enough structure damage information. At last, the method of the finding optimum places to placed sensors for location which beam is damaged is studied. The efficient way of optimum place to placed sensors is found.
In this thesis, the different spectral analysis calculation methods are employed in vibration signal processing to abstract fault characteristics. The processing result indicates that methods of vibration signal procession are efficiently.
This thesis provides some realizable ways to realize the on-line dynamically inspect screen for structure damage.
Translation:
X射線探測焊縫及機械損傷方法概述
圖像中運動小目標的檢測一直是圖像處理與分析領域中的難題，它涉及到很多領域，具有很廣泛的研究價值和應用價值。在工業探傷領域，由于焊接過程出現的各種問題，會導致焊縫中含有氣孔和未焊透等缺陷，影響產品的質量和安全，所以焊接圖像中缺陷目標的檢測十分重要。目前X射線無損探傷系統主要采用人工方式進行在線檢測與分析，而人工檢測存在主觀標準不一致、勞動強度大等缺點。因此，急需要研究一種有效的缺陷自動檢測方法來代替人工檢測，從而使在線檢測工作客觀化、規范化和智能化。本文的研究工作就是基于此而展開的。
本文探討了焊縫圖像中缺陷目標的自動檢測方法，主要做了以下幾個方面的研究:(1)針對X射線焊縫檢測圖像中存在大量與缺陷檢測無關的背景冗余信息，采用了一種基于自適應閉值分割的焊縫區域的自動提取方法，以減少計算量，提高檢測精度，取得了較好的效果。(2)由于SUSAN算法具有良好的抗噪能力，對圖像的邊緣、角點能夠很好的識別，所以本文研究了一種以SUSAN算法為基礎的，焊縫缺陷自動檢測算法，同時輔助以形態學去噪和填充等運算，取得了較好的效果。(3)因為小波分析方法具有很好的局部化特性，它能對高頻采取逐漸精細的時域或空域步長，從而可以聚焦到分析對象的任意細節。所以研究了一種利用小波分解來得到缺陷目標的形狀和位置信息，并結合維納濾波和形態學運算的焊縫缺陷檢測方法，結果比較理想。為了驗證本文提出的兩種算法的有效性，本文對在工廠實際得到的含有缺陷目標的焊接圖像進行了檢測，取得了較好的效果，證明了本文方法的可行性。
焊管缺陷的自動檢測是保證鋼管產品質量的重要環節。在鋼管生產過程中需要對焊管焊縫進行無損檢測，X射線實時成象檢測是一種比較有效的檢測手段。隨著生產率的不斷提高，對焊管焊縫的自動化X射線檢測要求越來越迫切，實現焊管焊縫的自動化檢測具有重要的理論意義和實際意義。小波變換作為信號和圖象處理的一種強有力的工具，其理論框架己基本形成，但從工程應用的角度，小波變換技術還處于初級階段，還需進一步完善。.本文主要研究小波分析技術如何用于焊縫圖象處理與識別以及一些相關技術。
為建立焊管焊縫自動定位檢測控制系統，提出了焊縫圖象識別的多機系統結構方案，該系統采用多處理器并行處理的結構，并由上位機工PC協調控制管理。系統能完成對焊縫圖象的存貯、焊縫定位、缺陷識別和質量評定。并成功地研制了基于工SA總線的Watch-Dog接口板，使用冗余法進行斷點數據存儲和恢復，實現了系統的可靠運行。
硬件系統使用了Taxax儀器公司的高速信號處理器'I'MS320C30。圖象采集卡能每秒連續采集25幀焊縫圖象，使得實時完成焊縫圖象處理與識別成為可能。在充分研究多分辨分析理論和分析信號處理器技術特點的基礎上，針對DSP TMS320C3X的特點，提出了一種有限序列的FWT(快速小波變換)的改進算法，詳細闡述了信號處理器上FWT的周期性擴展的實現問題，用DSP TMS320C3X匯編語言實現了改進的FWT算法。
通過對小波變換系數進行閡值處理，給出了一種基于二維離散小波變換的圖像去噪方法并用算子的形式加以描述。討論了幾種閡值選取方法和閡值策略，并提出了一種魯棒局部閉值去噪法。用均方差衡量去噪性能，實驗表明用魯棒局部閉值去噪法好于全局閉值去噪法。
為提高邊緣檢測的準確性和實時性，需要尋找一種適合于低對比度模糊焊縫圖象邊緣檢測的快速方法。本文分析了焊縫圖象的主要噪聲來源及噪聲與信號在小波變換下呈現的不同特點，提出了一種基于小波變換的多分辨率邊緣檢測方法。實驗表明該算法的邊緣檢測效果明顯優于經典的邊緣檢測方法。 針對具體的鋼管直管對接焊縫圖象，研究了其橢圓成象的幾何關系，提出了焊縫圖象區域模型，為進一步處理焊縫圖象提供了理論依據。提出了一
種模型基多分辨率圖象自適應分割算法。該算法以O(shè)tsu判別準則為基礎，結合焊縫區域模型進行焊縫圖象的自適應目標分割，具有較好的分割效果。
研究了在焊縫圖象中目標缺陷的自動識別這一難題，在借鑒人類視覺系統知覺組織過程的基礎上，提出了一種基于知識的多特征融合多窗口結構多分辨率目標識別算法。該算法依據一定的先驗知識和準則，輔以人工智能的手段，能夠得到較為精確的目標識別結果，是一種極有前途的智能識別算法。
提出了一種幾何特征快速提取算法，該算法改變了通常先圖象二值化后提取目標參數特征的做法，而是直接對灰度圖象進行目標參數特征提取。使用本文提出的幾何特征快速提取算法可以有效地實現缺陷目標的快速識別處理。
隨著生產的發展與科學技術的進步，各類機械設備和結構向著大型、高效化發展，從而也使得這些機械設備和結構趨于復雜化。復雜的承載條件與長時間的連續工作，導致設備結構的損傷不可避免。因斷裂、疲勞、腐蝕和磨損而造成的破壞，其損失達美、日等國家每
年國民經濟總值的6%^' 8%。而在我們國家20世紀80年代的結構損傷事故率比工業化國家高10倍，人員累計傷亡居國內勞動安全事故第二位。1986年，美國的“挑戰者，，號航天飛機失事?lián)p失高達12億美元;蘇聯的切爾諾貝利核電站的核泄漏事故，對整個地區的人員、
生態環境都是無法估量的損害。1985年我國大同電廠一機組聯軸器斷裂事故、1988年秦嶺電廠機組主軸斷裂，造成的經濟損失均近億元，并嚴重影響華北和西北地區供電。從1984年到1991年，我國50MW以上的汽輪發電機組轉子嚴重損壞等重大事故就達6起。因此，研究防止這類事故發生的根本途徑一一大型復雜機械結構的健康狀況監測與故障診斷(尤其是早期故障診斷)的理論和技術，實現結構損傷的早期識別，及時采取措施，防止損傷的發展，以保證這些系統安全、可靠、長壽命、高效率地運行成為緊迫的任務。然而，對于大型的復雜機械結構，實現合理、優化地布置傳感器，監測其運行結構的局部損傷，從中識別出損傷的結構件及損傷狀態，進行早期故障預報是具有相當?shù)碾y度的。 國內外的研究報道顯示，由于結構振動模態參數對不同損傷各有其敏感性，加之大型復雜結構振動模態識別技術發展的限制，以振動特性為參數對結構進行損傷檢測的研究大多集中在諸如直梁、析架等簡單對稱結構，且多是基于有限元分析數值計算得出相應的結論。而實際設備的構造及聯接都是相當復雜的，無法實現可靠的有限元建模。如何實現用振動測試技術對實際復雜上業結構的健康狀況進行監測與故障的在線診斷還是一個急待解決的問題。
故障診斷技術具有很強的學科交叉性，尤其是現代控制理論，信號處理，模式識別、最優化方法、決策論、人工智能等的迅速發展，為解決復雜系統的故障診斷問題提供了理論基礎，形成了許多具體的方法。故障信號的特征提取為故障準確診斷的前提條件。近三十年來，
各類機械設備基于實時監測(包括振動監測)的故障診斷技術的研究和應用，促進了故障信號處理和特征提取技術的發展。這些技術包括時域信號波形分析和統計特征值提取;基于FFT分析的高斯平穩隨機信號現代譜分析技術:自功率譜和互功率譜、高階譜、倒譜、復倒譜以及譜嫡與極大嫡譜估計(也包括與之相對應的自相關與互相關函數、高階自相關函數等時域分析);非平穩信號的時頻分析和多元統計分析等。故障診斷技術還涉及到材料的選擇、制造工藝、結構設計、斷裂力學等多種學科和專業技術領域。隨著力學、材料科學、物理學、化學領域的學科交叉與發展，可從缺陷的背景和損傷、斷裂機制來研究從材料變形、損傷到失效的全過程。而計算機數據處理、模式識別的技術發展為與早期故障相關的微弱信號的捕捉和提取，提供了有利的手段。
結構損傷檢測是一個具有廣闊工程應用背景的研究課題，而大型復雜結構損傷檢測的研究離實際應用還有距離，還有一許多問題需要在今后的研究中加以解決:如精確的測量信息處理技術的發展，以期獲得更加精確的測量模態;基于吸收各種方法優點的混合模型的結構損傷檢測方法的研究;大型設備的工況監測，傳感器的合理布置與優化配置問題的具體應用;其它理論方法的引入，如模糊數學的應用以及子結構振動分析方法的應用等等。
本課題以大型振動機械為研究對象，進行結構損傷檢測方法研究。常規的無損檢測方法，如超聲波、射線以及磁力探傷與滲透法探傷等大多是用于生產過程中間環節的零件離線檢測和設備檢修，通常為靜態檢測。本項目研究的基本思路是對大型振動機械進行多測點建
模，利用振動測試技術進行充分的離線試驗和分析來獲取被診斷結構的振動特性細節、故障機理及其特征，作為結構動力學本質特征庫的先驗知識與在線自動故障診斷信息庫的重要內容;研究以結構的少測點獲取結構損傷信息的建模方法，合理配置傳感器，實現對大型振動
結構進行健康狀況的在線監測。通過振動特性的微小變化，發現與定位結構早期損傷，離線實現結構損傷細節的分析與估計。上述思想是本項目研究的創新性思維。
課題具體內容包括:通過對整體結構的模態參數識別，判斷損傷的結構;用聲發射技術對損傷的結構進行損傷細節分析;研究對大型振動機械進行健康狀況監測的方法。
大型直線振動篩是洗煤廠的主要設備之一，作為振動機械，不僅工作強度大，且工作環境十分惡劣，連續工作使其結構極易產生疲勞斷裂。本課題的研究目標是采用對振動篩的結構進行系統動力學健康狀況監測與聲發射技術離線檢測相結合的方式確定結構損傷的部位
與損傷的程度。
下橫梁是振動篩的主要承載結構件，也是易損傷結構。本文從振動篩的損傷下橫梁識別入手，研究大型機械結構的早期故障診斷方法。
具體研究方法是:
研究近自由狀態的下橫梁的基本振動特性，提取前兩階彎曲模態振型為研究基礎。系統研究了不同程度損傷所引起這兩階模態頻率的相應變化以及頻響函數幅值的變化規律，獲得了梁的損傷程度與模態頻率以及頻響函數幅值間變化規律的經驗公式;
研究在連接約束狀態下的下橫梁的基本振動特性，發現在振動篩整體結構中，下橫梁的這兩階彎曲模態振型仍然存在，只是模態頻率產生向低頻方向的移動，且振型略有變異，但彎曲模態的主要特征依然存在。因此，以此兩階彎曲模態振型為研究基礎，研究損傷所引起
這兩階模態頻率的相關變化以及頻響函數幅值的變化規律，提出了相應的經驗公式;
基于對振動篩的子結構一一下橫梁及其損傷特征的充分研究，進一步研究下橫梁損傷對振動篩的整體振動特性的影響。發現在特定的頻率區間(這里是20Hz-30Hz，含損傷下橫的振動篩的頻響函數非常明顯地向低頻方向移動。對此，作者做了三項工作:(1)對頻響函數在這段頻率范圍的變化規律做了詳細分析;(2)用小波分析與功率譜分析對時域振動加速度信號進行了處理，提取損傷特征;③選取特定的參考點，研究振動信號傳輸率的變化，提取出損傷特征;
基于對振動篩的振動特性及其子結構損傷的系統研究，提出了振動篩子結構損傷定位方法。通過含損傷子結構與完好子結構振型的相關分析，可準確確定損傷子結構的位置。這個方法的提出是本文的創新性土作之一;
研究運行狀態下以少測點獲取結構損傷信息的建模方法，提出傳感器合理布置方法，實現大型結構構件局部損傷的在線檢測與定位 (確定構件位置)。這項研究是本文工作的創新點性;
最后，本文用聲發射技術對損傷下橫梁進行了損傷部位的精確定位，并對裂紋的聲發射信號進行了小波分析及功率譜分析，可提取出裂紋的聲發射信號特征，為進一步的后續研究探尋路徑。
在本文的研究思路上，將設備結構健康狀況的在線動力學監測與離線的聲發射損傷細節分析技術相結合，提出了大型結構損傷檢測的一個新思路。
本文對振動篩結構的健康狀況監測、局部結構損傷檢測與定位做了基礎性研究工作，用多種物理方法提取結構損傷特征，為實際工業應用做了理論準備。
收藏