隨車起重機下車設計【6張CAD圖紙】

喜歡這套資料就充值下載吧。資源目錄里展示的都可在線預覽哦。下載后都有，請放心下載，文件全都包含在內，【有疑問咨詢QQ:414951605 或 1304139763】=喜歡這套資料就充值下載吧。資源目錄里展示的都可在線預覽哦。下載后都有，請放心下載，文件全都包含在內，【有疑問咨詢QQ:414951605 或 1304139763】= 徐州工程學院畢業設計（論文）任務書 機電工程 學院 機械設計制造及自動化 專業設計（論文）題目 隨車起重機下車設計 學 生 姓 名 陸衛杰 班 級 04機本4班 起 止 日 期 2008.2.252008.6.2 指 導 教 師 李清偉 教研室主任 李志 發任務書日期 2008 年 2 月 25 日1.畢業設計的背景： 本課題來源于模擬生產實際,屬于工程應用。起重機是當代最為得力的起重設備之一。隨著國民經濟的不斷發展,多種類型的起重機廣泛的運用于冶金、礦山、水泥、碼頭、化工、糧食等行業的各種場合。同時在各種場合對不同的工況所使用的起重機也不盡相同，近年來由于起重機的應用范圍的擴大，品種的增多以及質量的不斷提高， 對加工設計起重機提出了更高的要求。2.畢業設計(論文)的內容和要求：根據隨車起重機的結構和特點，重點對隨車起重機下車各部分進行了設計和計算；回轉部分采用液壓馬達驅動回轉支撐實現，回轉機構的液壓控制系統設置了雙向液壓鎖，支腿機構通過水平液壓缸和垂直液壓缸實現各支腿的收縮動作，采用并聯控制系統實現各支腿的同時動作。3.主要參考文獻：1 朱文堅，黃平，吳昌林.機械設計M.北京：高等教育出版社，2005.2謝開泉.前置式隨車起重運輸汽車的總體設計J.廣西機械，2000，(3):33-36.3徐斌.QY25型隨車起重機設計D.大連理工大學，2004.4 哈爾濱建筑學院.工程起重機M.哈爾濱：中國建筑工業出版社，1981.5徐新才.機械設計手冊M.北京：機械工業出版社，1992.4.畢業設計(論文)進度計劃(以周為單位)：起 止 日 期工 作 內 容備 注第一周第二周第三周第四周第五周第六周第七周第八周第九周第十周第十一周第十二周第十三周第十四周第十五周第十六周調研、查閱相關文獻，收集資料。調研、查閱相關文獻，收集資料。綜合分析文獻資料，提出并論證下車整體設計方案計算并確定支腿的跨距和支撐形式。設計起重臂的回轉方式。設計回轉臺結構并繪制其結構圖。設計回轉臺結構并繪制其結構圖。設計支腿結構并繪制其結構圖。設計支腿結構并繪制其結構圖。確定下車液壓系統整體結構，繪制下車液壓系統原理圖。根據下車液壓系統與原理圖，計算選擇液壓原件。根據下車液壓系統與原理圖，計算選擇液壓原件。繪制下車裝配圖，并根據裝配圖修改完善回轉臺和支腿的結構圖繪制下車裝配圖，并根據裝配圖修改完善回轉臺和支腿的結構圖整理圖紙資料，撰寫畢業論文。整理圖紙資料，撰寫畢業論文。教研室審查意見： 室主任 年 月 日學院審查意見： 教學院長 年 月 日徐州工程學院畢業設計（論文）開題報告課 題 名 稱： 隨車起重機下車設計 學 生 姓 名： 陸衛杰 學號： 20040601418指 導 教 師： 李清偉 職稱： 講師 所 在 學 院： 機電工程學院 專 業 名 稱： 機械設計制造及自動化 徐州工程學院2008 年 3月 4 日說 明1根據徐州工程學院畢業設計(論文)管理規定，學生必須撰寫畢業設計（論文）開題報告，由指導教師簽署意見、教研室審查，學院教學院長批準后實施。2開題報告是畢業設計（論文）答辯委員會對學生答辯資格審查的依據材料之一。學生應當在畢業設計（論文）工作前期內完成，開題報告不合格者不得參加答辯。3畢業設計開題報告各項內容要實事求是，逐條認真填寫。其中的文字表達要明確、嚴謹，語言通順，外來語要同時用原文和中文表達。第一次出現縮寫詞，須注出全稱。4本報告中，由學生本人撰寫的對課題和研究工作的分析及描述，沒有經過整理歸納，缺乏個人見解僅僅從網上下載材料拼湊而成的開題報告按不合格論。5. 課題類型填：工程設計類；理論研究類；應用（實驗）研究類；軟件設計類；其它。6、課題來源填：教師科研；社會生產實踐；教學；其它課題名稱隨車起重機上車設計課題來源模擬生產實際課題課題類型工程應用選題的背景及意義本課題來源于模擬生產實際,屬于工程應用。起重機是當代最為得力的起重設備之一。隨著國民經濟的不斷發展,多種類型的起重機廣泛的運用于冶金、礦山、水泥、碼頭、化工、糧食等行業的各種場合。同時在各種場合對不同的工況所使用的起重機也不盡相同，近年來由于起重機的應用范圍的擴大，品種的增多以及質量的不斷提高，對加工設計起重機提出了更高的要求。研究?jī)?nèi)容擬解決的主要問題通過分析和計算確定隨車起重機下車支腿的支撐形式及其跨距，設計起重臂的回轉形式，設計支腿的結構以及回轉部分的結構。設計隨車起重機下車支腿水平伸縮、起重臂回轉所需的下車液壓系統。并且根據下車液壓系統需要，計算選擇合適的泵、油缸及閥等液壓元件。研究方法技術路線研究了隨車起重機的結構和特點，重點對隨車起重機下車的各部分進行了設計與計算；回轉部分采用液壓馬達驅動回轉支承實現，回轉機構的液壓控制系統設置了雙向液壓鎖，支腿機構通過水平液壓缸和垂直液壓缸實現各支腿的收縮動作，采用并聯控制系統實現各支腿的同時動作。研究的總體安排和進度計劃第一周：調研、查閱相關文獻，收集資料。第二周；調研、查閱相關文獻，收集資料。第三周：綜合分析文獻資料，提出并論證下車整體設計方案第四周：計算并確定支腿的跨距和支撐形式。第五周：設計起重臂的回轉方式。第六周：設計回轉臺結構并繪制其結構圖。第七周：設計回轉臺結構并繪制其結構圖。第八周：設計支腿結構并繪制其結構圖。第九周：設計支腿結構并繪制其結構圖。第十周：確定下車液壓系統整體結構，繪制下車液壓系統原理圖。第十一周：根據下車液壓系統與原理圖，計算選擇液壓原件。第十二周：根據下車液壓系統與原理圖，計算選擇液壓原件。第十三周：繪制下車裝配圖，并根據裝配圖修改完善回轉臺和支腿的結構圖第十四周：繪制下車裝配圖，并根據裝配圖修改完善回轉臺和支腿的結構圖第十五周：整理圖紙資料，撰寫畢業論文。第十六周：整理圖紙資料，撰寫畢業論文。主要參考文獻湖北汽車學院.隨車起重機新機型D.湖北：中國汽車工業出版社，2003.謝開泉.前置式隨車起重運輸汽車的總體設計J.廣西機械，2000，(3):33-36.徐斌.QY25型隨車起重機設計D.大連理工大學，2004.徐新才.機械設計手冊M.北京：機械工業出版社，1992.朱宏濤.液壓與氣壓傳動M.北京：清華大學出版社，2005.杜國森.液壓元件產品樣本M.北京：機械工業出版社，2000.顧迪民.工程起重機M.北京：中國建筑工業出版社，1981.Charles.Wilson.Kinematics and Dynamics of MachineryJ.New York,2000， (6):120-132.指導教師意 見 指導教師簽名： 年 月 日 教研室意見學院意見教研室主任簽名：年 月 日 教學院長簽名： 年 月 日徐州工程學院畢業設計摘 要隨著現代科學技術的迅速發展，起重機在現代化生產過程中應用越來越廣。本文首先介紹了隨車起重機的結構和特點，重點對隨車起重機下車的各部分進行了設計；回轉機構采用液壓馬達驅動回轉支承實現，回轉機構的液壓控制系統設置了緩沖閥，可以實現自由滑轉和平穩微動；支腿機構通過水平液壓缸和垂直液壓缸實現各支腿的收縮動作，采用并聯控制系統實現各支腿的同時動作。具體內容主要包括：1支腿的選型與跨距的確定,穩定性的校核與驗算。2回轉機構的設計,支承裝置的選型與計算.3液壓系統的設計以及液壓元件的選擇。本設計的主要特點是：機構簡單,節省投資，控制方便。對確定中、小隨車起重機設計具有一定的參考價值。關鍵詞：隨車起重機；回轉機構；支腿 ；液壓系統AbstractWith the rapid development of the science and technology, the truck crane is widely used in the modernization production process.In the article, the structure of the truck crane is briefly introduced, The second part is designed:The pump is used to drive the rotation structure and the dead value is used in the hydraulic system in order to rotate steadily;The level and vertical hydraulic cylinder are used to drive the support legs.This design main content includes:1.The design of the type and span of the legs and the checkout of the stability;2.The design of rotation structure and its type;3.The design of hydraulic system and the choice of the hydraulicunits.The advantage of the design is simple structure and operation. It can help to design truck crane.Keywords： truck crane ; rotation fulcrum arrangement ; Leg；Hydraulic system目 錄1 緒論11.1概論11.2隨車起重機市場的發展水平和趨勢11.3隨車起重機的數字化簡介22 隨車起重機的技術參數42.1主要性能參數42.2參數確定53 支腿型式選擇與計算63.1支腿型式分類及選擇63.2 支腿跨距確定63.3支腿受力分析73.4活動支腿危險截面計算84 底盤類型與選擇94.1汽車起重機底盤分類94.2底盤選擇和承載力計算104.2.1底盤選擇104.2.2起重車軸載質量分配105 起重車穩定性計算135.1起重車最不利工況135.2起運車最不利工況位置的整車質量145.3動穩定性校核計算145.4靜穩定性校核計算176 回轉機構設計196.1工況及載荷196. 2 回轉支承選型及強度驗算196.2.1回轉支承選型196.2.2回轉支撐強度驗算216.2.3回轉支撐聯接螺栓計算216.3回轉機構的設計226.3.1回轉機構的類型226.3.2回轉機構的布置型式選擇226.3.3回轉機構驅動裝置設計227 液壓系統原理設計及液壓原件選擇287. 1液壓系統型式287.1.1開式和閉式系統287.1.2單泵和多泵系統287. 2液壓系統的控制297.2.1定量節流控制系統297.2.2變量系統307.3下車液壓系統設計307.4液壓缸的選擇337.4.1缸體與缸蓋連接結構337.4.2活塞與活塞桿連接結構337.4.3活塞桿頭部結構：337.4.4導向套結構337.4.5密封與防塵結構337.4.6緩沖結構337.4.7垂直液壓缸的選擇347.4.8水平液壓缸的選擇357.4.9液壓缸主要零部件材料及技術要求367.5其他液壓元件的選擇367.6液壓系統性能驗算37結論40致謝41參考文獻42附錄43附錄一43英文原文43中文翻譯59 4 徐州工程學院畢業設計附錄附錄一英文原文Hydraulic Conductors and FittingsEric Sandgren *, T.M. Cameronto account for uncertainty aMechanical Engineering, Virginia Commonwealth University, 601 West Main Street, P .O. Box843015, Richmond, VA 23284-3015, USA Received 19 October 2001;accepted 5 June 20021.1 INTRODUCTIONIn a hydraulic system, the fluid flows through a distribution system consisting of conductors and fittings, which carry the fluid from the reservoir through operating components and back to the reservoir. Since power is transmitted throughout the system by means of these conducting lines (conductors and fittings used to connect system components), it follows that they must be properly designed in order for the total system to function properly.Hydraulic systems use primarily four types of conductors:1.Steel pipes2.Steel tubing3.Plastic tubing4.Flexible hosesThe choice of which type of conductor to use depends primarily on the systems operating pressures and flow rates. In addition, the selection depends on environmental conditions such as the type of fluid, operating temperatures, vibration, and whether or not there is relative motion between connected components.Conducting lines are available for handling work pressures up to 10,000 Pa or greater. In general, steel tubing provides greater plumbing flexibility and neater appearance and requires fewer fittings than piping. However, piping is less expensive than steel tubing. Plastic tubing is finding increased industrial usage because it is not costly and circuits can be very easily hooked up due to its flexibility. Flexible hoses are used primarily to connect components that experience relative motion. They are made from a large number of elastomeric (rubberlike) compounds and are capable of handling pressures exceeding 10,000 Pa.Stainless steel conductors and fittings are used if extremely corrosive environments are expected. However, they are very expensive and should be used only if necessary. Copper conductors should not be used in hydraulic systems because the copper promotes the oxidation of petroleum oils. Zinc, magnesium, and cadmium conductors should not be used either because they are rapidly corroded by water-glycol fluids. Galvanized conductors should also be avoided because the galvanized surface has a tendency to flake off into the hydraulic fluid. When using steel pipe or steel tubing, hydraulic fittings should be made of steel except for inlet, return, and drain lines, where malleable iron may be used.Conductors and fittings must be designed with human safety in mind. They must be strong enough not only to withstand the steady-state system pressures but also the instantaneous pressure spikes resulting from hydraulic shock. Whenever control valves are closed suddenly, this stops the fluid, which possesses large amounts of kinetic energy. This produces shock waves whose pressure levels can be two or four times the steady-state system design values. Pressure spikes can also be caused by sudden stopping or starting of heavy loads. These high-pressure pulses are taken into account by the application of an appropriate factor of safety.1.2 CONDUCTOR SIZING FOR FLOW-RATE REQUIREMENTSA conductor must have a large enough cross-sectional area to handle the flow-rate requirements without producing excessive fluid velocity. Whenever we speak of fluid velocity in a conductor such as a pipe, we are referring to the average velocity. The concept of average velocity is important since we know that the velocity profile is not constant. As shown in Chapter 5 the velocity is zero at the pipe wall and reaches a maximum value at the centerline of the pipe. The average velocity is defined as the volume flow rate divided by the pipe cross-sectional area: In other words, the average velocity is that velocity which when multiplied by the pipe area equals the volume flow rate. It is also understood that the term diameter by itself always means inside diameter and that the pipe area is that area that corresponds to the pipe inside diameter. The maximum recommended velocity for pump suction lines is 4 ft/s (1.2 m/s) in order to prevent excessively low suction pressures and resulting pump cavitation. The maximum recommended velocity for pressure lines is 20 ft/s (6.1 m/s) in order to prevent turbulent flow and the corresponding excessive head losses and elevated fluid temperatures. Note that these maximum recommended values are average velocities.EXAMPLE 1-1A pipe handles a flow rate of 30 gprn. Find the minimum inside diameter that will provide an average fluid velocity not to exceed 20 ft/s.Solution Rewrite Eq. (3-26), solving for D:EXAMPLE 1-2A pipe handles a flow rate of 0.002. Find the minimum inside diameter that will provide an average fluid velocity not to exceed 6.1 m/s.Solution Per Eq. 3-35) we solve for the minimum required pipe flow area:The minimum inside diameter can now be found, becauseSolving for D we have1.3 PRESSURE RATING OF CONDUCTORS Tensile StressA conductor must be strong enough to prevent bursting due to excessive tensile stress (called hoop stress) in the wall of the conductor under operating fluid pressure. The magnitude of this tensile stress, which must be sustained by the conductor material, can be determined by referring to Figure 4-1. In Fig. 4-1(a), we see the fluid pressure ( P ) acting normal to the inside surface of a circular pipe having a length (L). The pipe has outside diameter D0 , inside diameter Di, and wall thickness t. Because the fluid pressure acts normal to the pipes inside surface, a pressure force is created that attempts to separate one half of the pipe from the other half.Figure 4-1(b) shows this pressure forcepushing downward on the bottom half of the pipe. To prevent the bottom half of the pipe from separating from the upper half, the upper half pulls upward with a total tensile force F. One-half of this force ( or F/2 ) acts on the cross-sectional area (tL) of each wall, as shown.Since the pressure force and the total tensile force must be equal in magnitude, we havewhere A is the projected area of the lower half-pipe curved-wall surface onto a horizontal plane. Thus, A equals the area of a rectangle of width Di and length L, as shown in Figure 4-1(b). Hence,The tensile stress in the pipe material equals the tensile force divided by the wall cross-sectional area withstanding the tensile force. This stress is called a tensile stress because the force (F) is a tensile force (pulls on the area over which it acts).Substituting variables we have where = Greek symbol (sigma) = tensile stress.As can be seen from Eq. (4-2), the tensile stress increases as the fluid pressure increases and also as the pipe inside diameter increases. In addition, as expected, the tensile stress increases as the wall thickness decreases, and the length of the pipe does not have any effect on the tensile stress.Burst Pressure and Working PressureThe burst pressure (BP) is the fluid pressure that will cause the pipe to burst. This happens when the tensile stress () equals the tensile strength ( S ) of the pipe material. The tensile strength of a material equals the tensile stress at which the material ruptures. Notice that an axial scribe line is shown on the pipe outer wall surface in Fig. 4-1(a). This scribe line shows where the pipe would start to crack and thus rupture if the tensile stress reached the tensile strength of the pipe material. This rupture will occur when the fluid pressure (P) reaches BR Thus, from Eq. (4-2) the burst pressure is The working pressure (WP) is the maximum safe operating fluid pressure and is defined as the burst pressure divided by an appropriate factor of safety (FS). A factor of safety ensures the integrity of the conductor by determining the maximum safe level of working pressure. Industry standards recommend the following factors of safety based on corresponding operating pressures:FS = 8 for pressures from 0 to 1000 PaFS = 6 for pressures from 1000 to 2500 PaFS = 4 for pressures above 2500 PaFor systems where severe pressure shocks are expected, a factor of safety of 10 is recommended.Conductor Sizing Based on Flow Rate and Pressure ConsiderationsThe proper size conductor for a given application is determined as follows:1. Calculate the minimum acceptable inside diameter (Di) based on flow-rate requirements.2. Select a standard-size conductor with an inside diameter equal to or greater than the value calculated based on flow-rate requirements.3. Determine the wall thickness (t) of the selected standard-size conductor using the following equation: 4. Based on the conductor material and system operating pressure (P), determine the tensile strength (S) and factor of safety (FS).5. Calculate the burst pressure (BP) and working pressure (WP) using Eqs. (1.3) and (1.4).6. If the calculated working pressure is greater than the operating fluid pressure, the selected conductor is acceptable. If not, a different standard-size conductor with a greater wall thickness must be selected and evaluated. An acceptable conductor is one that meets the flow-rate requirement and has a working pressure equal to or greater than the system operating fluid pressure.The nomenclature and units for the parameters of Eqs. (1.2), (1.3), (1.4), and （1.5) are as follows:BP = burst pressure (Pa, MPa)Di = conductor inside diameter (in., m)D0 = conductor outside diameter (in., m)FS = factor of safety (dimensionless)P = system operating fluid pressure (Pa, MPa)S = tensile strength of conductor material (Pa, MPa)t = conductor wall thickness (in., m)WP = working pressure (Pa, MPa)= tensile stress (Pa, MPa)EXAMPLE 1-3A steel tubing has a 1.250-in, outside diameter and a 1.060-in, inside diameter. It is made of SAE 1010 dead soft cold-drawn steel having a tensile strength of 55.000 Pa. What would he the safe working pressure for this tube assuming a factor of safety of 8?Solution First, calculate the wall thickness of the tubing:Next, find the burst pressure for the tubing:Finally, calculate the working pressure at which the tube can safely operate:Use of Thick-Walled ConductorsEquations (1.2) and (1.3) apply only for thin-walled cylinders where the ratio Di / t is greater than 10. This is because in thick-walled cylinders (Di / t 10), the tensile stress is not uniform across the wall thickness of the tube as assumed in the derivation of Eq. (1.2). For thick-walled cylinders Eq. (1.6) must be used to take into account the nonuniform tensile stress, 式（1.6）Thus, if a conductor being considered is not a thin-walled cylinder, the calculations must be done using Eq. (1.6). As would be expected, the use of Eq. (1.6) results in a smaller value of burst pressure and hence a smaller value of working pressure than that obtained from Eq. (1.3). This can be seen by comparing the two equations and noting the addition of the 1.2t term in the denominator of Eq. (1.6).Note that the steel tubing of Example 1.3 is a thin-walled cylinder because = 1.060 in./0.095 in. =11.2 10. Thus, the steel tubing of Example 1.3 can operate safely with a working pressure of 1230 Pa as calculated using a factor of safety of 8. Using Eq. (1.6) for this same tubing and factor of safety yieldsAs expected the working pressure of 1110 Pa calcu1ated using Eq. (1.6) is less than the 1230 Pa value calculated in Example 4-3 using Eq. (1.3).1.4 STEEL PIPESSize DesignationPipes and pipe fittings are classified by nominal size and schedule number, as illustrated in Fig. 4-2. The schedules provided are 40, 80, and 160, which are the ones most commonly used for hydraulic systems. Note that for each nominal size the outside diameter does not change. To increase wall thickness the next larger schedule number is used. Also observe that the nominal size is neither the outside nor the inside diameter. Instead, the nominal pipe size indicates the thread size for the mating connections. The pipe sizes given in Fig. 4-2 are in units of inches.Figure 4-3 shows the relative size of the cross sections for schedules 40, 80, and 160 pipes. As shown for a given nominal pipe size, the wall thickness increases as the schedule number increases.Thread Design Pipes have tapered threads, as opposed to tube and hose fittings, which have straight threads. As shown in Fig. 4-4, the joints are sealed by an interference fit between the male and female threads as the pipes are tightened. This causes one of the major problems in using pipe. When a joint is taken apart, the pipe must be tightened farther to reseal. This frequently requires replacing some of the pipe with slightly longer sections, although this problem has been overcome somewhat by using Teflon tape to reseal the pipe joins. Hydraulic pipe threads are the dry-seal type. They differ from standard pipe threads because they engage the roots and crests before the flanks. In this way, spiral clearance is avoided.Pipes can have only male threads, and they cannot be bent around obstacles. There are, of course, various required types of fittings to make end connections and change direction, as shown in Fig. 4-5. The large number of pipe fittings required in a hydraulic circuit presents many opportunities for leakage, especially as pressure increases. Threaded-type fittings are used in sizes up to in. in diameter. Where larger pipes are required, flanges are welded to the pipe, as illustrated in Fig. 4-6. As shown, flat gaskets or 0-rings are used to seal the flanged fittings.1.5 STEEL TUBINGSize DesignationSeamless steel tubing is the most widely used type of conductor for hydraulic systems as it provides significant advantages over pipes. The tubing can be bent into almost any shape, thereby reducing the number of required fittings. Tubing is easier to handle and can be reused without any sealing problems. For low-volume systems, tubing can handle the pressure and flow requirements with less bulk and weight. However, tubing and its fittings are more expensive. A tubing size designation always refers to the outside diameter. Available sizes include-in. increments from -in. outside diameter up to -in. outside diameter. For sizes from-in. to 1 in. the increments are -in. For sizes beyond 1 in., the increments are-in. Figure 4-7 shows some of the more common tube sizes (in units of inches) used in fluid power systems.SAE 1010 dead soft cold-drawn steel is the most widely used material for tubing. This material is easy to work with and has a tensile strength of 55,000 Pa. If greater strength is required, the tube can be made of AISI 4130 steel, which has a tensile strength of 75,000 Pa.Tube FittingsTubing is not sealed by threads but by special kinds of fittings, as illustrated in Fig. 4-8. Some of these fittings are known as compression fittings. They seal by metal-to-metal contact and may be either the flared or flareless type. Other fittings may use 0-rings for sealing purposes. The 370 flare fitting is the most widely used fitting for tubing that can be flared. The fittings shown in Fig. 4-8(a) and (b) seal by squeezing the flared end of the tube against a seal as the compression nut is tightened. A sleeve inside the nut supports the tube to dampen vibrations. The standard 450 flare fitting is used for very high pressures. It is also made in an inverted design with male threads on the compression nut. When the hydraulic component has straight thread ports, straight thread 0-ring fittings can be used, as shown in Fig. 4-8(c). This type is ideal for high pressures since the seal gets tighter as pressure increases.Two assembly precautions when using flared fittings are:1.The compression nut needs to be placed on the tubing before flaring the tube.2. These fittings should not be over-tightened. Too great a torque damages the sealing surface and thus may cause leaks.For tubing that cant be flared, or if flaring is to be avoided, ferrule, 0-ring, or sleeve compression fittings can be used see Fig. 4-8(d), (e), (f). The O-ring fitting permits considerable variations in the length and squareness of the tube cut.Figure 4-9 shows a Swagelok tube fitting, which can contain any pressure up to the bursting strength of the tubing without leakage. This type of fitting can be repeatedly taken apart and reassembled and remain perfectly sealed against leakage. Assembly and disassembly can be done easily and quickly using standard tools. In the illustration, note that the tubing is supported ahead of the ferrules by the fitting body. Two ferrules grasp tightly around the tube with no damage to the tube wall. There is virtually no constriction of the inner wall, ensuring minimum flow restriction. Exhaustive tests have proven that the tubing will yield before a Swagelok tube fitting will leak. The secret of the Swagelok fitting is that all the action in the fitting moves along the tube axially instead of with a rotary motion. Since no torque is transmitted from the fitting to the tubing, there is no initial strain that might weaken the tubing. The double ferrule interaction overcomes variation in tube materials, wall thickness, and hardness.In Fig. 4-10 we see the 450 flare fitting. The flared-type fitting was developed before the compression type and for some time was the only type that could successfully seal against high pressures.Four additional types of tube fittings are depicted in Fig. 4-11: (a) union elbow, (b) union tee, (c) union, and (d) 45 male elbow. With fittings such as these, it is easy to install steel tubing as well as remove it for maintenance purposes.EXAMPLE 1-4Select the proper size steel tube for a flow rate of 30 gpm and an operating pressure of 1000 Pa. The maximum recommended velocity is 20 ft/s, and the tube material is SAE 1010 dead soft cold-drawn steel having a tensile strength of 55,000 Pa,Solution The minimum inside diameter based on the fluid velocity limitation of 20 ft/s is the same as that found in Example 4-1 (0.782 in.).From Fig. 4-7, the two smallest acceptable tube sizes based on flow-rate requirements are1-in. od , 0.049-in, wall thickness, 0.902-in. ID1-in. od , 0.065-in, wall thickness, 0,870-in. IDLets check the 0.049-in, wall thickness tube first since it provides the smaller velocity:This working pressure is not adequate, so lets next examine the 0.065-in, wall thickness tube:This result is acceptable, because the working pressure of 1030 Pa is greater than the system-operating pressure of 1000 Pa and10.1.6 PLASTIC TUBINGPlastic tubing has gained rapid acceptance in the fluid power industry because it is relatively inexpensive. Also, it can be readily bent to fit around obstacles, it is easy to handle, and it can be stored on reels. Another advantage is that it can be color-coded to represent different parts of the circuit because it is available in many colors. Since plastic tubing is flexible, it is less susceptible to vibration damage than steel tubing.Fittings for plastic tubing are almost identical to those designed for steel tubing. In fact many steel tube fittings can be used on plastic tubing, as is the case for the Swagelok fitting of Fig. 4-9. In another design, a sleeve is placed inside the tubing to give it resistance to crushing at the area of compression, as illustrated in Fig. 4-12. In this particular design (called the Poly-Flo Flareless Tube Fitting), the sleeve is fabricated onto the fitting so it cannot be accidentally left off.Plastic tubing is used universally in pneumatic systems because air pressures are low, normally less than 100 Pa. Of cour