三軸六檔變速器結構設計【含4張CAD圖紙+文檔全套】
喜歡就充值下載吧。。資源目錄里展示的文件全都有，，請放心下載，，有疑問咨詢QQ:414951605或者1304139763 ======================== 喜歡就充值下載吧。。資源目錄里展示的文件全都有，，請放心下載，，有疑問咨詢QQ:414951605或者1304139763 ========================
哈爾濱工業大學華德應用技術學院畢業設計
摘 要:
汽車變速器發展經歷了100 多年,從最初采用側鏈傳動到手動變速器到現在的液力自動變速器和電控機械式自動變速器,再向無級自動變速器方向發展。發動機是汽車的心臟,發動機產生的動力必須經過傳動系統才能驅動車輪轉動。傳動系統的心臟是變速器。由于發動機的轉速和轉矩的變化范圍小,而汽車行駛速度的變化范圍廣,所以一開始傳動系統就設置了變速器。變速器的作用: ①改變汽車的傳動比,擴大驅動車輪轉矩和轉速的范圍,使車輛適應各種變化的行駛工況,同時使發動機在理想的工況下工作; ② 在發動機轉矩方向不變的前提下,實現汽車的倒退行駛; ③實現空擋,中斷發動機傳遞給車輪的動力,使發動機能夠起動、怠速。100 多年中,變速器經歷了用變速桿改變鏈條的傳動比→手動變速器→有級自動變速器→無級自動變速器的發展歷程。
關鍵詞: 汽車；變速器；工作原理；發展歷史；發展趨勢
Abstract
The development of auto transmission has experienced more than 100 years’ history, from the initial use of side-chain drive to the manual transmission, to the current hydraulic. Automatic transmission and electronically controlled automatic mechanical transmission, to the no-class automatic transmission direction. The engine is the heart of the car. The power of the engine transmission system must drive the wheels turning. Transmission System is the heart of transmission. As the engine speed and torque are on the scope of the changes, but vehicle’s speed and scope of change, so at beginning on the transmission system set up a transmission. The role of the transmission : ① change the transmission ratio of motor vehicles, wheel drive torque to expand the scope and speed to adapt to changes in the vehicle driving cycle, at the same time it can make the engine in good working condition; ② not in the direction of engine torque. Under the premise of change, it can make cars on the retrogression; ③ achieve in neutral gear, interrupted the power of the wheels transmission by the engine so that the engine can start, idling. More than 100 years, the transmission has changed from Bian Sugan → the chain of transmission ratio → manual transmission → a class-automatic transmission → no class automatic transmission → course of development.
Keywords: Automotive; transmission; principle; history of development; development trend
目錄
摘 要............................................................I
第1章 緒論......................................................1
1.1. 課題的目的和意義.........................................1
1.2. 課題研究的現狀...........................................1
1.3. 變速器的設計思想.........................................2
1.4. 研究的主要工作內容.......................................2
第2章 變速器設計的總體方案......................................4
2.1. 設計依據.................................................4
2.2. 傳動機構布置方案分析,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,4
2.3. 變速器基本參數的確定,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,6
第3章 主要零部件的設計及計算,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,11
3.1. 齒輪的設計及校核,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,11
3.1.1. 齒輪參數確定及各檔齒輪齒數分配,,,,,,,,,,,,,,,,,,,,,11
3.1.2. 齒輪強度計算,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,18
3.1.3. 變速器齒輪的材料及熱處理,,,,,,,,,,,,,,,,,,,,,,,,,,,21
3.2. 軸的設計及校核,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,21
3.2.1. 初選軸的直徑.......................................21
3.2.2. 軸的剛度計算.......................................22
3.2.3. 軸的強度計算.......................................31
第4章 同步器的選擇.............................................37
4.1. 慣性式同步器............................................37
4.1.1. 鎖環式同步器的機構.................................37
4.1.2. 鎖環式同步器的工作原理.............................38
4.1.3. 鎖環式同步器主要尺寸的確定.........................38
4.2. 主要參數的確定..........................................39
4.2.1 摩擦因數 f..........................................39
4.2.2 同步環主要尺寸的確定................................40
4.2.3 鎖止角β............................................41
4.2.4 同步時間............................................41
4.2.5 轉動慣量的計算......................................42
第5章 變速器操縱機構的選擇和箱體設計原則.......................43
5.1. 變速器操縱機構的選擇....................................43
5.2. 變速器箱體設計原則......................................43
致 謝...........................................................44
參考文獻........................................................45
IV
收藏