輪胎切碎機的結構設計

輪胎切碎機的結構設計,輪胎切碎機的結構設計,輪胎,切碎,結構設計 摘 要 輪胎切碎機是機械式處理廢舊輪胎的一種設備，它將前面預加工的輪胎條進一步粗略切碎成15mm左右長橡膠碎塊，以備后面的設備繼續加工成膠粉。該機構由機架、驅動機構（電動機,減速器）、旋轉切削機構、進料機構等組成。其基本工作原理為驅動機構帶動旋轉切削機構將進料機構進給的橡膠條切碎。切碎后從出料口自動流出。旋轉切削機構主要由轉子和刀具組成。該機結構簡單，加工制造容易，安裝方便，并且在結構上采用了自動進料機構，從而降低了人工勞動強度。該機適用于中小型企業生產和使用。本文不僅對這些機構進行了設計，也對主要零部件進行了校核分析，同時敘述了輪胎切碎機的發展歷程和前景。 關鍵詞 廢舊輪胎 轉動機構 進料機構 Abstract The tire chopper is one kind of equipment for the mechanical type processing worn out tire, it will prepare processed tire before further rough cut to around 15mm long rubber pieces or so long rubber broken bits to continue by having the equipments of behind to process gum powder.The machine is consist of frame, drive organization(electric motor, retarder), revolve to slice to pare organization and enter to anticipate organization's etc.It basic work principle for drive organization to arouse to revolve to slice to pare organization will enter to anticipate organization to enter to of the rubber cut to pieces.Anticipate a people's auto run off from after cutting to pieces.Revolve to slice to pare organization mainly from rotor and knife to constitute.The machine's structure simple, process a manufacturing easily, install convenience, and on the structure adopt auto enter anticipate organization, lowered artificial labor strength thus.The machine is applicable to medium the small scaled business enterprise produce and use.This text not only carried on a design to these organizations, but also carried on a school pit analysis to main zero partseses, describing a tire to cut to pieces development process and foreground of machine in the meantime. Key words Discarded tires Rotating bodies Body feed I