立體倉庫的PLC控制系統設計

立體倉庫的PLC控制系統設計,立體倉庫的PLC控制系統設計,立體倉庫,plc,控制系統,設計 密 級 分類號 編 號 成 績 本科生畢業設計 (論文) 外 文 翻 譯 原 文 標 題 An Analysis of Dual shuttle Automated Storage/Retrieval systems 譯 文 標 題 關于立體化倉庫使用雙貨叉的探討 作者所在系別 作者所在專業 作者所在班級 作 者 姓 名 作 者 學 號 指導教師姓名 指導教師職稱 完 成 時 間 譯文標題 關于立體化倉庫使用雙貨叉的探討 原文標題 An?Analysis?of?Dual?Shuttle?Automated Storage/Retrieval?Systems 作 者 Brett?A.?Peters 譯 名 布雷特 A.彼得 國 籍 美國 原文出處 愛思唯爾期刊 摘要：本文主要探討的是可以提高生產效率的雙貨叉立體倉庫系統。通過使用該系統，可以縮短堆垛機在一個雙任務流程中的運行時間，從而大大提高了倉庫的工作效率。雙貨叉?zhèn)}庫系統相當于一個四任務指令模（uadruple?command?mode簡稱QC）中的雙指令任務書流程。一個很有建設性的思想被提出來，即通過堆垛機按某一順序運行可以縮短在一個（QC）中的運行時間，蒙地卡羅對此進行了模擬對比實驗，實驗結果證明確實提高了堆垛機的搬運效率，這就說明了這種方案的可行性。 關鍵詞：自動化立體倉庫 自動化立體倉庫的控制 功能模擬和分析 1. 緒論 自動化立體倉庫被廣泛地應用于倉儲和制造設備當中。典型的單位貨物裝卸立體倉庫由儲藏架，堆垛機，自動運輸小車，和入庫/出庫臺組成。衡量一個立體倉庫系統的優劣的主要標準是倉庫系統的工作效率。立體倉庫的工作效率與堆垛機運行一個工作流程所需的時間成反比，這個工作流程時間包括堆垛機裝卸貨物的時間，顯然堆垛機裝卸貨物的時間在一定程度上取決于堆垛機和貨架的具體結構和規格。 Han通過立體倉庫返回站點的排列提高了立體倉庫的工作能力，合理的排列返 回站點堆垛機能減少不必要的行程，從而縮短了時間，提高了效率。這樣他們就提出了一種最大限度提高效率理論，即如果堆垛機在雙指令模塊流程中可以縮短運行時間那么這將最大程度的提高立體倉庫的工作效率。也就是說，如果堆垛機運行的是單命令路線，卻能完成存貨和返回的動作，則工作效率的提高也就實現了。 在論文中，我們分析了一種可供選擇的堆垛機設計方法，這種設計出來的堆垛機與一般的堆垛機不同，在原來的基礎增加了一個貨叉，這種新穎設計的堆垛機擁有兩個貨叉，它在運作中可以縮短在貨架到返回點之間的運行時間。這種設計方案符合Han?所說的最大效率理論。雙貨叉堆垛機主要是針對如何提高堆垛機的工作能力這一問題所設計的一種新穎堆垛機。目前，立體倉庫系統的研究是以單貨叉堆垛機為主要對象。在本文關于雙貨叉堆垛機功能的分析也是建立有前人研究的基礎上的。 2. 可供選擇的堆垛機設計 一個基本的單一裝載立體倉庫系統中，每一個貨架巷道內都有一臺可供操作的堆垛機，每臺堆垛機有一根立柱被固定在天花板和地面之間，這根立柱可以在巷道內的水平位置移動。與立柱相連的是一個貨叉機構，它可以載著貨物沿著立柱上下移動，貨叉也可以作相對于貨格的水平取貨和存貨運動。 一個基本的單貨叉堆垛機立體倉庫系統能夠完成一個單指令作業流程也能完成一個雙指令作業流程。一個單指令作業流程由存貨和取貨組成，對于一個存貨過程所需時間包括堆垛機在入庫處裝載貨物，行駛到目標貨格，卸下貨物，然后回到倉庫入口處這一連串動作總共所需的時間。同樣可以分析取貨過程所需時間。 一個雙指令流程就是在同一個工作流程中完成存貨和取貨的操作。這個過程時間包括從入口處裝貨，運行到存貨貨格位置，把貨放在貨架上，空運行到取貨貨格位置，從貨架上取下貨物，回到倉庫入口處，并卸下貨物這一過程總共需要的時間。 如果我們對堆垛機的雙指令工作流程路線稍加分析就會發現，當在完成一個取貨運作時，就暗示著可以進行下一個存貨運作，而且，如果在同一地方可以進行存貨和取貨運作，那么運行時間將被縮短，這個運行時間相當于運行一個單指令流程所需的時間。就目前已存在的立體倉庫設計，要實現這種操作是不可能的，因此，另外一種雙貨叉式的堆垛機就應運而生了。 3. 堆垛機的運作 設想一臺安裝了兩個貨叉的堆垛機,這種新穎的堆垛機可以同時裝載兩件貨物,為了兩件貨物分別能存庫和出庫,所以堆垛機的兩個貨叉機構能夠相互獨立運行,具體結構如圖3所示,這種堆垛機的工作過程將在下文詳細介紹。 ? 堆垛機從倉庫入口處將要被儲存的貨物裝載到第一個貨叉平臺上，然后向貨 的位置移動.到達要取貨的位置之后，第二個貨叉臺伸貨格內取貨，當取貨的動作完成之后，堆垛機控制第一個貨叉臺卸貨。堆垛機然后再回到入口處。這整個操作流程就像是一個單指令運作再加上一小段重新定位運行過程（即堆垛機第二個貨叉平臺裝載和卸載過程），這樣一來，其運作就像一臺堆垛機完成先完成取貨然后再存貨的一個雙任務命令。 因?yàn)檫@種堆垛機有兩個貨叉平臺，所以兩個貨叉的定位控制將是系統的一個很重要的功能。堆垛機用兩個貨叉可以在某個貨架的同一位置完成一個存、取雙任務指令，先在空貨駐臺上取下要出庫的貨物，再移動第二貨叉到指定位置把貨物放在空貨格內。然而，貨叉平臺結構的選擇與本文的討論內容無關。 為了實現上述操作，堆垛機的第二個貨叉必須在第一個貨叉完成取貨動作之后才能進行定位操作。由于貨叉的定位移動量是較小的，堆垛機采用的是低速爬行方式來實現貨叉微小的定位移動量，在這個過程中所耗費的時間與堆垛機在裝貨卸貨耗費的時間相比一般是微乎其微的。倉庫設計的另外一個特點是第一排貨格和最后一排貨格的兩端要留有位置余量，以便在堆垛機超程時給兩個貨叉平臺留有運動余地。 4. 工作效率的提高 為了估算正在設計的雙貨叉系統工作量的提高，我們引用Bozer?和White提出的有關單任務和雙任務指令所需時間理論和Han?et?al.提出的最近有意義想法價值理論，這些理論家都作了種種設想，他們設想的共同部分就是我們要引用的內容，下面就是這些理論的內容。倉庫的貨架被考慮成為連續矩形框架，貨物出/入處被設置在貨格的左下角位置。貨架的長度和寬度以及堆垛機水平和垂直運行的速度應該明確。堆垛機貨叉臺能同時在水平和垂直兩個方向運動，在計算運行時間方面作如下處理，貨叉在水平和垂直方向時進行勻速運動，加速和減速緩沖極限速度，爬行速度用來定位兩個貨叉臺。假設與物流過程相關的裝載貨物和卸載貨物所用的時間為常量，因此，可以把它簡單的加到運行時間中去。堆垛機只能以單指令要求和雙指令要求為基礎，例如，不允許堆垛機在巷道內多次啟停。（這個分假設后來應用于新設計的堆垛機完成四重作業流程。為了符合最短鄰近的啟發思想，取貨數n可用來排列，且在貨格內有m個開放的位置。 5. 雙貨叉堆垛機系統 新設計的堆垛機有兩個貨叉臺,因此可以對其進行雙貨叉系統的操作:同時搬運兩件貨物并分別把它們放置在指定的位置,在不同位置取兩件貨物并回到出入口.上述工作流程能通過在四個不同的位置存、取操作來實現。因此，運行時間將由一個單指令任務時間再加上三個運行時間。為了更有效的完成上述四個操作，在完成一個雙指令任務操作中就包含完成了在一個位置存、取操作。這種被稱為四指令任務流程的模擬操作系統能減少運行時間，因而比此前的所提的模擬系統要更能提高效率。四重指令任務流程能在倉庫的任意一位置完成存儲操作，而取貨程序是按照先到先服務的原則處理。即使如此，合理的按排取貨的順序也能顯著的減少四種操作中的運行時間，Han曾經這樣分析以提高單貨臺立體倉庫系統的工作效率。本文的分析也是以他們的研究為基礎的。 6. 結論 本文對自動化立體倉庫中的一種雙貨架堆垛機進行了較為詳細的分析，應用這種倉儲系統所帶來的好處表現在以下兩個方面：1．四種操作運行中與單一貨叉的堆垛機相比，雙貨叉堆垛機可以提高工作效率的范圍是40%到45%。 2．一個雙任務操作中，雙貨叉的設計顯著縮短了運行時間。雙貨叉系統使提高倉庫的工作效率成為可能。這種設計主要的缺點是要增加堆垛機的額外成本。在決定是否適合于某一特定情況時，對其經濟估算通常是必要的。盡管如此，基于立體倉庫工作效率的考慮，雙設計貨叉臺堆垛機系統還是大有前景的。雙貨架系統的概念也可延伸到其它物流系統中去。因此，在這項工作時有必要對其它倉庫系統（比如基本的倉儲系統）進行戰略考慮，相比之下以便于發現它們在提高工作效率方面的不足這處，本文還提供了一種雙貨叉自動化立體倉庫的分析框架并為其它與之相關的一些研究提供了基礎。 ? ? An?Analysis?of?Dual?Shuttle?Automated Storage/Retrieval?Systems Abstract:This?paper?addresses?the?throughput?improvement?possible?with?the?use?of?adual?shuttle?automated?storage?and?retrieval?system.?With?the?use?of?such?asystem,?travel?between?time?in?a?dual?command?cycle?is?virtually?eliminatedresulting?in?a?large?throughput?improvement.?The?dual?shuttle?system?is?thenextended?to?perform?an?equivalent?of?two?dual?commands?in?one?cycle?in?aquadruple?command?mode?(QC).?A?heuristic?that?sequences?retrievals?tominimize?travel?timein?QC?mode?is?developed.?Monte?Carlo?simulation?resultsare?providedfor?evaluating?the?heuristic's?performance?and?show?that?it?performswell,achieving?large?throughput?improvementscompared?with?that?of?the?dualcommand?cycle?operating?under?the?nearest?neighbor?retrieval sequencing heuristic. Keywords:Automated warehouse Automatic control of the three-dimensional werhouse Funcyional simuiation and analysis 1. Introduction Automated warehouse is widely used in warehousing and manufacturing equipment. The unit cargo warehouse by typical storage shelves, stacking machine, automatic transport vehicle, and import and export platform. The main standard to measure a warehouse system is warehouse system efficiency. The work efficiency of warehouse and stacker the operation required a work flow time is inversely proportional to the flow time including stacker loading time, stacker loading time obviously depends on the stacker and shelf structure and specifications. Han through three-dimensional warehouse return site arrangement, improve the three-dimensional warehouse work ability, reasonable arrangement back Back to the site of stacking to reduce unnecessary travel function, so as to shorten the time and improve the efficiency. So they proposed to maximize the efficiency of theory, namely if the stacker in double instruction module process can shorten the running time it will maximize warehouse efficiency. That is to say, if the stacker is running a single command line, it can complete the inventory and return to action, improve the work efficiency is also achieved. In this paper, we analyze an alternative stacker stacker design method, and the general design of the stacking machine this is different, a fork are added, the novel design of stacker has two forks, it can shorten the operation time to return to the point between the on the shelf in the operation. The design conforms to the theoretical maximum efficiency Han said. Double fork stacker is mainly for a novel stacker stacker to improve the ability to work the problem of design. At present, research on warehouse system is to fork stacker as the main object. In this paper, a double fork stacker function The analysis is based on previous studies. 2. Alternative stacker design A basic loading single warehouse system, each shelf tunnel have a stacker for stacking machine operation, each one upright post is fixed between the ceiling and the ground, this column can move the horizontal position in the tunnel. And the column is connected to a goods fork mechanism, it can be loaded with goods moving along the column, the fork can also be compared with the level of prices of goods and goods inventory movement. A basic single fork stacker warehouse system can complete a single instruction process can complete a double instruction process. A single instruction process by the goods, the time required for an inventory process including the stacker in storage at the loading of the goods, driving to the target prices of goods and unloading of cargo, and then returned to the warehouse at the entrance of the total time required for a series of actions. The same can analyze the time required to pick up. A dual instruction process is the completion of inventory and delivery operations in the same working process. This process includes the time from the entrance to the inventory of goods loading, operation location, put the goods on the shelves empty run to the prices of goods location pick up, take the goods from the shelves, back to the warehouse at the entrance and discharge this process requires a total time of goods. If we double the stacker work instruction process route some analysis will be found, when completed in a freight operation, suggests that the inventory can the next operation, and, if in the same place to goods operation, so the running time will be shortened, the running time of the equivalent of running a single instruction, the time required to process. The existing warehouse design, the operation is not possible, therefore, in addition to a double fork type stacking machine came into being. 3. The operation of a stacker Imagine a computer installed stacker two fork, this novel stacker can be loaded at the same time two pieces of goods, in order to two pieces of goods can respectively store and warehouse, so the two fork mechanism of stacker can run independently, the specific structure as shown in Figure 3, the working process of the stacker in the following details. The stacker loads the stored goods from the entrance of the warehouse to the first pallet platform and then supplies the goods. The location of the mobile. After arriving to pick up the position, the second fork Taiwan extension goods shelf pick up, when to pick up the finished stacking machine to control the first fork stacker. Taiwan unloading and then return to the entrance. The whole process is like a single instruction operation plus a short re positioning operation the process (i.e. second stacker fork platform for loading and unloading process, as a result, its operation) is like a stacking machine to complete the first complete a double task and then pick up the inventory orders. Because the stacker two fork platform, so the positioning control two fork will be a very important function of the system. The two fork can complete a deposit in the same location of a shelf stacker, taking double task instructions, to take in air cargo warehouse in Taiwan the goods, then move second fork to the specified location of the goods on the goods shelf. However, regardless of the content selection and the discussion of the fork platform structure. In order to achieve the above operation, second fork stacker must complete the pickup action only after the positioning operation in the first fork. The positioning fork movement amount is small, stacker is used to realize the positioning of crawling fork small amount of movement of the time of discharge time and stacking machine the cost in the process of loading in general is very little compared. Another characteristic of warehouse design is the two ends of the first and last row row goods lattice SKUs to leave the position to give allowance, two fork left room for movement in the platform stacker overrun. 4. Improved work efficiency In order to work double fork system is designed to improve the estimation, we refer to the single task and dual task command Bozer and White proposed the time required for Han et al. theory and proposed recently meaningful ideas of value theory, these theorists have made assumptions, they want to set common part is that we will quote the content the following is the content of the theory, warehouse shelves were considered. A continuous rectangular frame, the goods / office is set in the prices of goods in the lower left corner position. Speed rack length and width and vertical and horizontal stacker operation should be clear. The fork stacker can be the same In the horizontal and vertical direction of the two movement, following treatment in the calculation of the running time, the fork of the uniform motion in the horizontal and vertical direction, acceleration and deceleration buffer limit speed, crawl speed used to locate the two fork. Assumption and logistics process related loading and unloading of goods in time therefore, it can be a constant, simple to operation time. The stacker only to single instruction requirements and dual instruction requirements for the foundation, for example, does not allow multiple stacking machine start and stop in the tunnel. (stacker this hypothesis was later applied to the new design of finishing four in line with the short process. Adjacent to the Enlightenment of thoughts, N can be used to pick up the number and arrangement of m open position in the cargo box. 5. Double pallet stacker system The new design of the stacker two fork, so you can double fork on the operation of the system. At the same time handling two pieces of goods are placed in the specified position in a different location from two pieces of goods and return to the entrance. The work flow can pass in four different positions. To achieve the operation. Therefore, the running time will be from a single instruction task time plus three hours of operation. In order to complete the four operations, after the completion of a dual task operation contains instructions completed in a position, take the operation. This is called the simulation operating system the four task flow instructions can reduce the running time, so it is better than the The simulation system had asked more. It can improve the efficiency of four instruction can complete the task flow storage operation in the warehouse at any location, and pick up program is on a first come, first served principle. Even so, reasonable arrange pick up the order also can significantly reduce the running time of operation in four once, Han analysis to improve single cargo warehouse system working efficiency. The analysis is based on their research. 6. Conclusion This paper makes a detailed analysis of a double shelf stacker in automated warehouse, the warehouse application system of the benefits in the following two aspects: four compared to the 1. stacker operation with a single fork, the range of double fork stacker can improve the work efficiency is 40% 45%. 2. a dual task operation, the design of double fork significantly shortened the running time. The double fork system to improve the warehouse work efficiency becomes possible. This design main disadvantage is to increase the additional cost of stacker. In deciding whether or not suitable for a particular situation, it is often necessary to the economic estimate Nevertheless, warehouse work efficiency based on the design of double fork stacker system is promising. The concept of double shelf system can also be extended to other logistics system. Therefore, it is necessary for other warehouse system in this work (for example the basic strategic storage system) consider, in contrast to find their problems at the Department to improve work efficiency, this paper also provides an analytical framework of double fork automated warehouse and provide a basis for other related studies. 指 導 教 師 評 語 外文翻譯成績： 指導教師簽字： 年 月 日 注：1. 指導教師對譯文進行評閱時應注意以下幾個方面：①翻譯的外文文獻與畢業設計（論文）的主題是否高度相關，并作為外文參考文獻列入畢業設計（論文）的參考文獻；②翻譯的外文文獻字?jǐn)?shù)是否達到規定數量（3 000字以上）；③譯文語言是否準確、通順、具有參考價值。 2. 外文原文應以附件的方式置于譯文之后。 12