干粉壓片機的設計【說明書+CAD+SOLIDWORKS+仿真】

干粉壓片機的設計【說明書+CAD+SOLIDWORKS+仿真】,說明書+CAD+SOLIDWORKS+仿真,干粉壓片機的設計【說明書+CAD+SOLIDWORKS+仿真】,干粉,壓片,設計,說明書,仿單,cad,solidworks,仿真 外文原文及翻譯在先進的結構發泡成型中獲得一個有高間隙率方法的研究John W. S. Lee, Jing Wang, Jae D. Yoon, and Chul B. Park摘要：結構性泡沫提供比它們同類更多的優點,包括更大的幾何準確性、最終產品的表面上沒有凹痕,較低的重量(由此延伸的需要以較低的材料),和更高的剛度與重量的比率。用傳統的結構實現一個合適的空隙率在結構泡沫發泡成型方法已經有一些成功;這些方法允許小的控制和產量大的孔洞及非均勻的單元結構。本文章報告使用一種先進的結構發泡成型機以一個高的空隙率，達到一個統一的單元結構。我們研究以下方面:注塑工藝參數流量、吹氣的理論容量,和熔體溫度。在內部的剖面壓力不同的加工條件下的模腔內研究了塑料的成核和生長。通過優化工藝條件,所有我們?nèi)〉昧艘粋€統一的單元結構和非常高的空隙率(40%)。1.簡介：結構成型是塑料成型所使用的一種傳統的注塑機。一種用物理吹劑(PBA),另一種用化工吹劑(CBA),或者兩者都被選用,在這個過程中,產生一種單元(泡沫)結構。這種結構性泡沫成型的優點有缺乏凹痕的最后一個部分的表面上,一個減了體重,低背壓,更快捷的生產周期時間,具有相當高轉速.因為這獨特的優勢,低壓預塑式結構發泡成型技術中得到了廣泛的應用制造大產品,需要幾何精度。實現一個適當?shù)目障堵试诮Y(jié)構泡沫使用傳統的注塑機并沒有證明是非常成功的,但由于這些成型方法允許小的控制和產量大的孔洞及非均勻的細胞結構。獲得一種統一的單元結構具有高空隙率、機器必須能先具有一張完全溶解和均勻的氣體混合物的沒有任何氣體的口袋。如果一個統一的單一氣體解決方案不是達到前發泡,將很難獲得一種統一的細胞結構發泡制品。在決策中，為滿足這一需求，要求一種先進的結構發泡成型技術與連續聚合物發展,該技術有利于均勻的離散和溶解氣體的聚合物熔體在成型過程中,從而保護的產生對難溶氣體大口袋。在一個我們展示了以前的工作,用一個定制的可行性小注塑系統組成的一個微型注射單位和發泡擠出機，基于這種新技術。然而,除了改善硬件技術,它也是必要開發適當?shù)奶幚聿呗砸钥刂萍毎L成核和模具型腔內。在此背景下,當前一些探討處理策略需要獲得一個統一的高間隙先進的結構發泡成型工藝單元結構。我們調查了下列重要參數:吹劑含量、注入流量、熔體溫度。使用我們的結構性泡沫獲得先進的成型技術進行表征方面的空隙率、細胞密度、細胞三維地形尺寸分布;x射線用來描寫的三維結構泡沫細胞的組織形態。內部的壓力剖面下模具型腔也被記錄在案，為了更好的理解不同加工條件下細胞的形核、長大的行為。2.研究背景：近年來,泡沫塑料注射成型的優勢已經引發了改進結構發泡成型技術。Trexel公司開發了一種微往復式注射成型技術的基出上,對預塑式注塑機進行了大量的工作。以進一步改善質模板在微孔發泡過程中使用了微結構成型。Turng，蘇達權等, ,研究了改變工藝條件的影響上,特別是在當前國內外微孔結構的例子, 混合成型用結構.何振平，高慶宇報道的創造與微孔發泡細胞的結構和表面質量良好使用了共聚物聚碳酸脂(PC).尹恩惠，孫俐，在當前國內外微孔形貌控制的聚丙烯(PP)等課程教學中存在的報道說,有一個高慶宇甲級的表面和高空隙率可以達到通過使用一個透氣通道.發泡等,綜述了最近高慶宇的微孔復合材料的新型高分子材料和鋼筋與礦物填料及自然光纖。Shimbo報道, 在典型的結構成型工藝另一種微孔發泡過程中注塑機，使用了一個預塑式注塑機被用來塑化螺柱塞聚合物,是用來注入聚合物進入模具腔,另一個替代方案泡沫注射成型工藝是在發達的德國亞琛的一個系統,在這個系統中,氣體注射在一個特別設計的噴油嘴，它安裝在塑化單元之間的，可對噴嘴關閉的常規射出成型機。此外,它達到更好的分散性之氣, 靜態混合元素被安裝之間的氣體噴油嘴和關閉噴嘴。這項技術后來為商業化專利。在2006年, 有人提出了一個結構,經過在先進的高慶宇發泡成型技術的基礎上,預塑式注射機傳統的結構發泡技術這樣就提高了注入氣體會完全溶解在聚合物。由一個強化技術的齒輪油泵及附加蓄能器使聚合物/氣體混合物形成一步連續不斷的成型操作。換句話說,更新的設計完全解耦,氣體溶解步驟的注塑操作使用一個主驅動泵。這一先進的結構發泡的細節 技術概述在下一節。3.先進的成型結構:先進的成型機。經過先進的發泡成型機器.這種技術促進統一的氣體色散和完整(或?qū)嵸|(zhì))溶解在聚合物熔體,盡管是穩定成型工藝。但是它認識到連續成型行為不可避免地引起不一致的氣體充填、這種結構使得流動但是聚合物熔體和天然氣是連續的(即不停止在注射時期)。圖1圖3-4圖1顯示的原理圖結構,經過先進的泡沫成型機在發達的Toronto大學的這臺機器包含了一主驅動泵(例如:一個齒輪泵)和額外的蓄電池、附于擠壓桶和之間的關斷閥。(一個位于前關閉閥門柱塞,另一種是位于噴嘴處。)此設計完全減弱氣體溶解步驟的注塑操作使用和維護主動驅動泵齒輪泵的穩態氣體溶解作用。在注塑業務,橡膠壓片機壓出的螺桿轉動,而生成聚合物/氣體混合物收集在加時賽的蓄電池。后兩者混合遭受到注塑和收集到的,它移動通過柱塞機制進入到下一個周期。這項技術確保了壓力,在擠壓桶內保持相對穩定,達到一致的氣體充填是這樣一個統一的聚合物/氣體混合物是取得了不管壓力波動柱塞。這項技術已經成為商業專利。均勻分布和完全溶解吹塑過程保持一致的氣體充填的聚合物和替代或近乎溶解所有的氣體在聚合物熔體,螺桿必須保持相對穩定的自轉時，在螺桿的優點是恒轉速移動一倍。首先,一致的氣體充填是容易實現:由于壓力波動的擠壓桶內減至最低。第二,維持一個高壓力下確保解散的注入氣體進入聚合物熔體。一個統一的聚合物/氣體混合物,其中的氣體已經完全(或?qū)嵸|(zhì)上)溶解, 為改善制品塑料結構。就需要有一個常數溶氣/重量配比提供理論依據。表1圖5圖6圖7 .瓦斯含量的影響和注入流量等泡沫的形態一個齒輪油泵是一種最基本的組成部分,因為它提供了一份改進工藝恒體積流率對聚合物/氣體混合物;泵上的壓力,從而控制的擠壓,并允許一個一致的連續性桶重量比為粘性聚合物熔體,壓力在擠壓酒桶保持相對穩定,因為這種積極的位移的齒輪泵。由于氣體流量壓力取決于在桶顯著,恒氣流量可以通過保持固定的壓力,在擠壓桶。聚合物/氣體混合物能夠控制的變轉速的齒輪泵。通過獨立控制的流動速率兩種氣體與聚合物/氣體混合物,這種聚合物流量也可以被控制住。因此,既有一致的重量比”,并獲得統一流動聚合物/氣體混合物可以很容易地實現與齒輪泵。這些優勢不能被輕易的做到了,用一個關閉或止回閥。背后的基本原理與裝備新模型具有額外的蓄能器來源于需要適應這個混合物在每個周期的注射期間使螺桿可以勻速旋轉和煤氣可以不斷的注入melt.4不斷旋轉螺桿是一種重要的差異,從以前所有的結構發泡成型技術是基于低壓塑料注塑系統。一旦是壓力相對穩定的擠出桶,它會變得更容易控制的流量,注入氣體的高分子,和氣體即可更為均勻散布到融化圖8 .細胞密度測量的地點A-C(0.3硅油%氮氣)。當一個一致的氣體聚合物量比,實現了注入氮氣,有一個非常低的溶解性,可完全溶化,如果一個足夠高的壓力保持在這兩種擠壓桶和累加器?！白銐蚋叩膲毫Α币馕吨垠w壓力遠高于溶解性的壓力進行了給定的氣體的注入聚合物熔體。此外,保持了足夠高的壓力后的油已經完全溶解,防止形成第二階段在聚合物熔體在積累階段。因為溶解性的壓力進行了瓦斯含量要求產生一個fine-celled結構例如,為0.1-1.0% N2期的140-1400 psi的高密度聚乙烯(HDPE)在200C17號低比壓極限存在的低壓預塑式結構性泡沫成型機(最大許用壓力3000 psi),一個足夠高的壓力就可以很容易地保持先進的結構發泡成型機。4.結果和討論：加工參數的影響程度,充模。圖4顯示了吹劑的影響(氮氣)和溫度對泡沫融化程度充滿了模具。卒中是用于不同的注入不同數目的N2為了達到不同的空泡內餾份:60,50,和40毫米,和0.5 ，0.1,0.3硅油%氮氣,分別。這些注入中風占期末無效的分數占17%,31%和45%,分別。很清楚,氮氣含量和噴射流量中起到了至關重要的作用,在確定充填型腔的程度。充填型腔的程度隨氮氣含量和注入流量而增加。因為低壓結構發泡成型使用一種近程注射,在這個過程中,依靠泡沫膨脹以填充模子腔。一個更高的氮氣含量增加的程度,從而提高了泡沫膨脹模具，也是值得注意是由高細胞密度增加氮氣含量是另一個推動力的創作中較大的空系率。 注射充模流動速率也受到了影響。因為在何種程度上的不同,熔體冷卻流量、更高注射注塑流動速度下降冷卻速率在注射過程中,這導致熔融粘度較低,同時,也增加了聚合物的力學性能。此外,因為熔體溫度比較高,在高注入流量、時間較長的細胞形核、長大。應該指出的是,晶核的成核和生長在模具型腔熔體溫度降低會了停一下下面的結晶溫度。5.總結:在這項研究中，實驗對各種材料的低壓注塑成型加工條件進行了調查，注射流量和模腔平均壓力在注塑中起到了至關重要的作用，它也發現氮氣的數量對形成致密的單元結構很重要。當?shù)獨夂刻?即,0.1硅油%),空腔壓降成核率會下降并導致制品的密度過低。另一方面,當?shù)獨夂孔銐蚋?例如,0.3硅油%及以上),會導致制品密度過高。我們還發現,沒有一個合適的阻力，我們不可能獲得一個統一的制品結構和較高的制品精度。通過優化所有的壓力加工條件,我們就能實現一個統一的細單元結構和較高的制品精度(接近40%)。參考文獻(1) Hornsby, P. R. Thermoplastics Structural Foams: Part 2 Properties and Application. Mater. Eng. 1982, 3, 443.(2) Ahmadi, A. A.; Hornsby, P. R. Moulding and Characterization Studies with Polypropylene Structural Foam, Part 1: Structure-Property Interrelationships. Plast. Rubber Process. Appl. 1985, 5, 35.(3) Hikita, K. Development of Weight Reduction Technology for Door Trip Using Foamed PP. JSAE ReV. 2002, 23, 239.(4) Park, C. B.; Xu, X. Apparatus and Method for Advanced Structural Foam Molding. U.S. Patent Application 11/219,309, filed Sep 2, 2005;Strategies to Achieve a Uniform Cell Structure with a High Void Fraction in Advanced Structural Foam MoldingABSTRACT：Structural foams offer numerous advantages over their solid counterparts, including greater geometrical accuracy, the absence of sink marks on the final products surface, lower weight (and, by extension, the need for less material), and a higher stiffness-to-weight ratio. The possibility of achieving a suitable void fraction in structural foams using conventional structural foam molding methods, however, has been of limited success;these methods allow for little control and typically yield large voids and a nonuniform cell structure. This article reports on our use of an advanced structural foam molding machine to achieve a uniform cell structure with a high void fraction. We studied the following processing parameters: injection flow rate, blowing agent content, and melt temperature. The pressure profile inside the mold cavity under various processing conditions was also investigated to elucidate cell nucleation and growth behaviors. By optimizing all processing conditions, we achieved a uniform cell structure and a very high void fraction (over 40%).IntroductionStructural foams are plastic foams manufactured using ，conventional preplasticating-type injection-molding machines. A physical blowing agent (PBA), chemical blowing agent，(CBA), or both are employed in the process to produce a cellular (foam) structure. The advantages of structural foam molding，include the absence of sink marks on the final parts surface, a reduced weight, a low back pressure, a faster production cycle ，time, and a high stiffness-to-weight ratio.1-3 Because of this unique set of advantages, a low-pressure preplasticating-type，structural foam molding technology has been used widely for manufacturing large products that require geometric accuracy. Achieving a suitable void fraction in structural foams using conventional structural foam molding has not proven to be successful, however, as these molding methods allow for little control and yield large voids and a nonuniform cell structure.To obtain a uniform cell structure with a high void fraction, the machine must be capable of first producing a completely dissolved and uniform gas/polymer mixture without any gas pockets. If a uniform single-phase polymer/gas solution is not achieved before foaming, it would be very difficult to attain a uniform cell structure in the final foam products. To meet this requirement, an advanced structural foam molding technology with continuous polymer/gas mixture formation was developed at the University of Toronto.4,5 This technology facilitates the uniform dispersion and dissolution of gas in the polymer melt during the structural foam molding process, thereby safe guarding against the creation of large, undissolved gas pockets. In a previous work,5 we demonstrated the feasibility of using a customized small injection molding system consisting of a miniinjection unit and a foaming extruder based on this new technology. However, in addition to improved hardware technology, it is also required to develop appropriate processing strategies to control cell nucleation and growth inside the mold cavity. In this context, the current article discusses some processing strategies required to obtain a uniform cell structure with a high void fraction in an advanced structural foam molding process. We investigated the following critical parameters: blowing agent content, injection flow rate, and melt temperature. The structural foams obtained using our advanced molding technology were characterized in terms of void fraction, cell density, and cell size distribution; three-dimensional X-ray topography was used to show the 3-D cell morphologies of the structural foams. The pressure profile inside the mold cavity was also recorded under various BackgroundIn recent years, the advantages of foam injection molding have prompted improvements in structural foam molding technologies. Trexel Inc. developed a microcellular injection molding technology (MuCell technology) based on a reciprocating-type injection molding machine.6,7 A great deal of work has been carried out to further improve the quality of the microcellular foams produced using the MuCell process. Turng et al., for example, investigated the impact of changing processing conditions on the microcellular foam structures, especially in cases of coinjection molding with nanocomposites Kanai et al. reported the creation of microcellular foams with a good cell structure and surface quality using copolymer polycarbonate reported the use of CaCO3 for controlling the microcellular foam morphology of polypropylene (PP). Sporrer et al. reported that a class-A surface and a high void fraction could be achieved in foaming by using a breathing mold.12 Recently, Bledzki et al. reviewed microcellular polymer materials and microcellular composites reinforced with mineral fillers and natural fibers. In 2000, Shimbo reported an alternative microcellular foam process that employed a preplasticating-type injection molding machine.14 A screw was used to plasticate the polymer, and a plunger was used to inject the polymer into the mold cavity as in typical structural molding. Another alternative foam injection molding process was developed at IKV, Aachen, Germany.In this system, gas was injected in a specially designed injection nozzle mounted between the plasticizing unit and the shut-off nozzle of a conventional injection molding machine. Furthe rmore,to achieve better dispersion of the gas, static mixing ，elements were mounted between the gas injection nozzle and the shut-off nozzle. This technology was later commercialized by Sulzer Chemtech. In 2006, Park et al. presented an advanced structural foam molding technology based on a preplasticating-type injection molding machine.4,5 The conventional structural foaming technology was improved such that the injected gas would completely dissolve into the polymer. The enhanced technology consisted of a gear pump and an additional accumulator to make the polymer/gas mixture formation step continuous regardless of the stop-and-flow molding operations. In other words, the newer design completely decoupled the gas dissolution step from the injection and molding operations using a positive-displacement pump. The details of this advanced structural foaming technology are outlined in the next section.This technology4 promotes uniform gas dispersion and complete (or substantial) dissolution in the polymer melt, despite the non -steady molding process. Recognizing that stop and-flow molding behavior inevitably causes inconsistent gas dosing, this design allows the flows of the polymer melt and gas to be continuous (i.e., not to stop during the injection period Figure 1 shows a schematic of the advanced structural foam molding machine developed at the University of Toronto.4 This machine comprises a positive-displacement pump (i.e., a gear pump) and an additional accumulator, which is attached between the extrusion barrel and the shut-off valves. (One shut-off valve is located before the plunger, and the other is located at the nozzle.) The design completely decouples the gas dissolution step from the injection and molding operations using the positive-displacement gear pump and maintains steady-state gas dissolution. During the injection and molding operations, the plasticating screw rotates, and the generated polymer/gas mixture collects in the extra accumulator. After the mixture has been subjected to both injection and molding and has been collected,it moves through the plunger mechanism to be injected into the next cycle. This technology ensures that the pressure in the extrusion barrel is relatively constant and that consistent gas dosing is attained so that a uniform polymer/gas mixture is achieved regardless of the pressure fluctuations in the plunger. This technology has been patentedHomogeneous Distribution and Complete Dissolution of Blowing Agent. To maintain consistent gas dosing of the polymer and to completely or near-completely dissolve all of the gas in the polymer melt, the screw must rotate at a relatively constant speed.4 The advantages of having the screw move ata constant rotational speed are two-fold. First, consistent gas dosing is easily realized because the pressure fluctuations inside the extrusion barrel are minimized. Second, maintaining a high pressure guarantees the dissolution of the injected gas into the polymer melt. A uniform polymer/gas mixture, in which the gas has been completely (or substantially) dissolved, that has a constant gas-to-polymer weight ratio provides the basis for improved uniform, fine-celled foam structuresA gear pump is an essential part of the improved process because it provides a constant volume flow rate for the polymer gas mixture; the pump thereby controls the pressure in the extrusion barrel and allows a consistent polymer-to-gas weight ratio to be maintained.4 For viscous polymer melts, the pressure in the extrusion barrel is relatively constant because of the positive displacement of the gear pump. Because the gas flow rate depends significantly on the barrel pressure, a constant gas flow rate can be obtained by maintaining a constant pressure in the extrusion barrel. The flow rate of the polymer/gas mixture can be controlled by varying the rotational speed of the gear pump. By independently controlling the flow rates of both the gas and the polymer/gas mixture, the polymer flow rate can also be controlled. Thus, both a consistent polymer-to-gas weight ratio and a uniform polymer/gas mixture can be easily achieved with a gear pump. These advantages could not be easily achieved with a shut-off or nonreturnable check valve alone. The rationale behind having outfitted the new model with an additional accumulator derives from the need to accommodate the mixture during each cycles injection period so that the screw can rotate at a constant speed and the gas can be continuously injected into the melt.4 The constantly rotating screw represents a significant difference from all previous structural foam molding technologies that are based on the low-pressure preplasticating-type system. Once the pressure in the extrusion barrel is relatively stable, it becomes easier to control the flow rate of the injected gas into the polymer, and the gas can be more uniformly dispersed into the melt. When a consistent gas-to-polymer weight ratio is achieved,the injected N2, which has a very low solubility, can dissolve completely if a sufficiently high pressure is maintained in boththe extrusion barrel and the accumulators. A “sufficiently high pressure” means that the melt pressure is much higher than the solubility pressure for the given amount of gas injected into the polymer melt. In addition, maintaining a sufficiently high pressure after the gas has been completely dissolved prevents the formation of a second phase in the polymer melt during the accumulation stage. Because the solubility pressure for the gas content necessary to produce a fine-celled structure e.g.140-1400 psi for 0.1-1.0% N2 in high-density polyethylene (HDPE) at 200 C17 is low compared to the pressure limit of the existing low-pressure preplasticating-type structural foam molding machines (maximum allowable pressure 3000 psi),a sufficiently high pressure can easily be maintained in the advanced structural foam molding machines，Although the advanced structural molding machine features modifications that allow for the complete dissolution of gas into a polymer melt while a constant gas-to-polymer weight ratio is maintained,4,5 this system design does not automatically guarantee the production of high-quality foams. To produce high quality foams with uniform cell structures and a large void fraction, a set of overall conditions must be satisfied; these conditions are described below.In addition to the formation of a foamable polymer/gas mixture with a uniform and constant polymer/gas weight ratio, the mold geometry including the gate shape should be designed properly.Once the hardware machinery has been properly designed and constructed, appropriate material compositions should be selected and fed into the system. Both the molecular weight and structure variation of the plastic resin and the type and content of added materials, such as the nucleating agent, the blowing agent, and any other additives or fillers, should be prudently selected because all of these materials and their compositions affect the cell nucleation and growth behaviors.Results And Discussion. It should be also noted that the measured void fractions inFigure 4 were higher than the set void fraction. If the void fractions of the sprue, runner, and injection-molded parts had been uniform, the measured void fraction from the molded part would be the same as the set void fraction. However, in reality, the void fractions of the spure and runner were observed to be lower than that of injection-molded part. This must have been caused by the higher pressure in the sprue and runner compared to the pressure in the mold cavity. Consequently, the measured void fraction of the injection-molded parts became higher than the set void fraction Some large bubbles were observed in the foam, however, when 0.5 wt % N2 was used. There might have been several reasons for this, as discussed earlier, but most likely, a content of 0.5 wt % was too high because of N2s low solubility The cavity pressure of a foaming mold has a significant influence on cell nucleation. If the cavity pressure is lower than the solubility pressure (or the threshold pressure22) of the injected gas and if the pressure before the gate is high enough, cell nucleation occurs at the gate with a high pressure drop rate. In such cases, the cell density will be high. However, if the cavity pressure is higher than the solubility pressure (or the threshold pressure), cell nucleation occurs along the mold cavity with a low pressure drop rate, resulting in a low cell density. Therefore, it is desirable to induce cell nucleation at the gate by reducing the cavity pressure in order to have a large number of cells. To achieve a high cell density and uniform cell structures in low-pressure structural foam molding, several requirements should be met with respect to the mold pressure profile. Figure 13 shows the proper pressure profiles in low-pressure structural foam molding. First, the pressure before the gate should be kept higher than the solubility (or threshold) pressure to prevent premature cell nucleation and growth. This pressure can be controlled by properly choosing the resistance of the gate and the injection flow rate. Second, the cavity pressure should be kept lower than the solubility (or threshold) pressure during injection to induce cell nucleation immediately after the gate. This can be achieved by regulating the melt temperature, the mold temperature, and the injection flow rate. Third, the gate should be designed properly so that a high pressure drop rate can be induced to nucleate a large number of bubbles. Finally, the blowing agent amount should be carefully determine