弧面凸輪數控轉臺的設計-機械部分【含CAD圖紙】
喜歡這套資料就充值下載吧。資源目錄里展示的都可在線預覽哦。下載后都有,請放心下載,文件全都包含在內,【有疑問咨詢QQ:1064457796 或 1304139763】=喜歡這套資料就充值下載吧。資源目錄里展示的都可在線預覽哦。下載后都有,請放心下載,文件全都包含在內,【有疑問咨詢QQ:1064457796 或 1304139763】=
MATHEMATICAL COMPUTER PERGAMON Mathematical and Computer Modelling 29 (1999) 69-87 MODELLING Curvature Analysis of Roller-Follower Cam Mechanisms HONG-SEN YAN Department of Mechanical Engineering, National Cheng Kung University Tainan 70101, Taiwan, R.O.C. WEN-TENG CHENG Department of Mechanical Engineering, I-Shou University Ta-Shu, Kaohsiung Hsien 840, Taiwan, R.O.C. (Received January 1996; accepted January 1998) Abstract-The equations related to the curvature analysis of the roller-follower cam mechanisms are presented for roller surfaces being revolution surface, hyperboloidal surface, and globoidal surface. These equations give the expressions of the meshing function, the limit function of the first kind, and the limit function of the second kind. Once these functions are known, the principal curvatures of the cam surface, the relative normal curvatures of contacting surfaces, and the condition of undercutting can be derived. Three particular cam mechanisms with hyperboloidal roller are illustrated and the numerical comparison between 2-D and 3-D cam is given. 1999 Elsevier Science Ltd. All rights reserved. Keywords-” F ; 8”, , I 1 (3) 0 0 01 T23 = 0 cp -sp 0 (4 where we designate sine and cosine of the corresponding angle as symbols C and S, and the subscript ij in the designation Tij is the transformation matrix from coordinate systems Sj to s+ Transformation matrix Trs can be obtained by the successive matrix multiplication P13l = Pii GoI To21 P231. (5) Transformation matrix Trs is expressed in partition matrix as follows: P131 P13l fT131 = O 1 l where Rrs is a rotation matrix and drs is a translation column vector. Taking the derivatives of transformation matrix Tls, relative velocity matrix Wrs, and rela- tive angular velocity matrix firs are given by w131 = T131T i;3 = ;l3 $1 , (7) p131 = R131T , $1 , 1 (11) where wT31 = 1 Pl31 71311. (12) Expanding equation (1 l), we have where w, wy, and w, are the components of the relative angular velocity between the roller and the cam, and TV, rr, and rz are the components of the relative translational velocity between the roller and the cam at the origin of coordinate system S3. All the components of the relative velocities are expressed in coordinate system S3. For the roller-follower cam mechanism, the meshing function Cp is defined as qe,u,q E n(3) .vl) = nf W, q . (14) For the cam surface being conjugate to the roller surface at the point of contact, the equation of meshing is given by (e, 21, t = 0. (15) Simultaneous solution of equations (9) and (15) determines the contact line on the roller sur- face for any given time t, and simultaneous solution of equations (10) and (15) determines the corresponding contact line on the roller surface in the meantime. The limit function of the second kind at for mutually contacting surfaces Cr and C3 is expressed as (a,(e,u,t) = np T w; ?-a) * (16) Let KY and $) be the principal curvatures of the roller surface C3, and in and bn be the corresponding principal directions in coordinate system S3. Then, the limit function of the first kind E is defined as 7,12 Q=Jvnz+Iry+, E = K$nz + wn Y, (17) C=$)VnY-IIZ, where wnz, WQ, ynxr and vnV are the components of the relative angular and sliding velocities in the tangent plane of mutually contact surfaces C3 and Cr as follows: wnIs = wp T in 1 9 my = w3 1 (31) T bn, (18) v = g. Using equations (A2) and (A4), the components of the relative velocity matrix Wis becomes w, = WY = 0, W% = (4; - l)Wl, rz = -aSf - 1) Se) wi, vu = (-aC - 1) + c (46 - 1) CO) WI, u* = 0. From equation (41), the meshing function is given by = (-aS(0+2)+b(fC (e+42)+b+;se)f. From equations (48) to (50), the coefficients 5 and C, and the limit function of the first kind are given by =(ac(e+2)-b(:-1)Ce), c = 0, E = -a2 - b2 (4: - 1)2 + 2ab (4; - 1) CfSO) u tan y (Sa + tan ycace) +c2as2e(u set y tan r)2 - u tan y (s;sase + siC8) (u /Tsec y). Example 3. Concave Globoidal Cam with an Oscillating Hyperboloidal Follower The settings of the coordinate systems for the concave globoidal cam with a hyperboloidal follower is shown in Figure 7. The globoidal cam rotates about the input axis with rotation angle 41, while the follower oscillates about the output axis with rotation angle $2. Thus, let sr = 0 and 52 = 0. The shortest d is t ante between the input and output axes is a and the twisted 82 H.-S.YAN AND W.-T. CHENG Figure 7. Concave globoidal cam with an oscillating hyperboloidal follower. angle a is r/Z. For the relative location of the rotation axis of the roller and the output axis, the distance b = 0 and the twisted angle S = 7r/2. The roller has a distance d from the origin of the coordinate system Ss to its base circle. And, the relation between the input and the output displacements is given by 42 = ) , B = w1 (cdq5 - 21 (tan 7 (a + dS42) - c sec2 7959 - U2 tan 7 sec2 7S42) , c = 0. From equation (42), the equation of meshing is given by ysC2 + (234; + y32) (d + 215X” 7) = 0. Furthermore, the limit function of the second kind is given by !Bt = II II Nt3) -1(AtsinB+Btcosf3+Ct), a3 where Curvature Analysis At = W: (cdC) , Bt = wf (cd l(N(3)11-1 ( (z3$i + y3c42&) (d + ?JSeC2 7) . nom equations (48) to (SO), the coefficients c and C, and the limit function of the first kind are given by 542) - ya(d + 4h + 5542) . 150 2 (deg) I I r .L_ MS i _ 1 Dwell j 1 I I Dwell 120 Figure 8. Motion function. Example 4. Numerical Comparison Between 2-D and 3-D Cams The cam mechanisms of Example 1 and Example 3 are applied to offer the quantifiable com- parison between the 2-D and 3-D cams. They use the same roller radius, follower displacement, motion function, and distance between the input and output axes. The motion function cPs(&) shown in Figure 8 is divided into five intervals and that the second and the fourth intervals use modified sine motion. Table 1 shows the parameters and the functions which are used for the disk cam and the globoidal cam. Table 1. Parameters of disk cam and globoidal cam. a4 H.-S. YAN AND W.-T. CHENG Figure 9. Cam profile for disk cam. 50 0 Figure 10. Cam profile for globoidal cam. I I f I I I, I I I I I I I I I I 0 h (de Figure 11. Pressure angle for disk cam. Curvature Analysis 85 For the roller surface being a cylindrical surface, the pressure angles q&k and qs10 for the disk cam and the globoidal cam are derived as Cvdisk = IbSfJ WV (b2 + c2 + 2bcC6)“2 cqdO = (c2ce2 + u2)1/2. Figures 9-14 shows the cam profiles, the pressure angles, and the principal curvatures for the disk cam and the globoidal cam. As shown in Figure 10, the pressure angles for the Profiles 1 and 2 of the globoidal cam have the same value for the same 41 and u. CONCLUSION The rollers with cylindrical surface, conical surface, and globoidal surface are usually used in roller-follower cam mechanisms. The cylindrical surface and the conical surface are special cases of the hyperboloidal surface. For the rollers of revolution surface, hyperboloidal surface, and globoidal surface, the curvature analysis of the roller-follower cam mechanisms are presented in this paper. For the mutually contacting surfaces between the cam and the follower, the principal curvatures of the cam surface, the relative normal curvature, and the condition of undercutting are expressed in terms of the meshing function and the limit functions. And, these functions for the cam mechanisms with the three-roller surfaces are derived. The hyperboloidal surface and the globoidal surface are the particular cases of the axis-symmetric quadric surface while the later one is a particular case of the revolution surface. For the simplicity of programming, we just focus on the roller of revolution surface. Here, all the surface normals of the roller surfaces are directed outward the roller. Therefore, the limit function of the first kind must be minus in order to avoid the undercutting. APPENDIX The transformation matrix Trs is given by a1 CdJz + CaS41S42 a3(44lS42 + CaS41C4J2) - Sj3SaS1 Z3 = I -+%c42 + CaCd1S42 Pwiw42 + CffC41C2) - spsaclpl SffSdJ2 SPCa + C&9aC42 0 0 (AlI -SP(-ChS4Q + CaS&C95,) - cpsasq+l a% - szSc&h + b(C$IC& + Ca&s#) -ww1w2 + CaC41wJ2) - CphYCc#q -a%h - szSaC& + b(-ShW2 + c0rc4s4) -SPSaC& + CPCa -61 + s2Ca + bSaS& 1 I. 0 The relative velocity matrix Wrs is given by w131 = 0 -wz wy rz WZ 0 -% rrl -wy WI 0 72 0 0 0 0 with the components w, = -&s&pz, I I (4 wy = -&(SPCa + CPSaC42) + &sp, w, = -&(CPCa - Spsacqh) + 42cp, (A3) 86 H.-S. YAN AND W.-T. CHENG t I- u=S8 360 Figure 12. Pressure angle for globoidal cam. _._- 0 Figure 13. First principal curvature for disk cam. 360 0.04 , , , , ua58 / Figure 14. Principal curvatures for globoidal cam. Curvature Analysis 87 Tz = -&(aCoS+z + s2SaC&) - BlSdq2, Ty = $1 (-Ccc/3 (b + aCq52) + sosp (a + bC42) + s2SaC/w2) + cj2bCP - 81 (Cc&P + SaC/3C42) + B2SP, T= = $1 (CcxS (b + aC&) + SaCP (u + bCq&) - s2SaSPS42) - rj2bSP - B1 (Cc&p - S&3/%39) + B&p. The derivative of relative velocity matrix Wls is given by 0 -Ljz Lj, iz 1 w13 = WZ 0 -Ljz iv 1. I -&Jar iJz 0 i, 0 0 0 0 (A3)(cont.) (A4) with the components . . . . l& = -4142SaC42 - lSwJ2, Ljy = &2cpsasq52 - $1 (SPCa + C/wap2) + J,sp, Lj* = 4142spsas42 + $1 (-cpccu + S/mYCq52) + $2cp, i, = -sac42 &s2 + &Sl + &(-aCaCq52 + s2SaS42) ( - $1 (aCaSq52 + s2SaC42) - IlScYS42, iv = CSaS42 (qi 1S2 + 42Bl + &$2 (aCCcxS, - bSaS/W+2 + sCSCYC) (A5) + $1 a (SaSP - CPYC) + b (-CaCp + Sk164) + s2CPSaSqi2 + &bC/3 - 51 (CCYSP + SCYCPG#J) + i2Sp, iz = -S/3SaSqs2 (” 182 + $2.41 + $142 (-aSpCcuS& - bSaCPS& - s2S&SaC&) + $1 a (SaCP + SPCaC&) + b (CdV3 + CPSaC42) - sSM+ - &bS/3 + lil (-C&j3 + SCYS/C) + s2Cp. REFERENCES 1. M.L. Baxter, Curvature-acceleration relations for plane cams, ASME Z?unsactions, 483-469, (1948). 2. M. Kloomok and R.V. Muffley, Determination of radius of curvature for radial and swinging-follower cam systems, ASME Transactions, 795-802, (1956). 3. F.H. Raven, Analytical design of disk cams and three-dimensional cams by independent position equations, ASME IPransactions, Journal of Applied Mechanics, 18-24, (1959). 4. S. Yonggang, Curvature radius of disk cam pitch curve and profile, In Proceedings of the ph World Congress on Theory of Machines and Mechanisms, pp. 1665-1668, (1987). 5. F.L. Litvin, Theory of Gearing, (in Russian), Nauka, Moscow, (1968). 6. F.L. Litvin, P. Rahman and R.N. Goldrich, Mathematical models for synthesis and optimization of spiral bevel gear tooth surfaces, NASA Contractor Report 3553, (1982). 7. F.L. Litvin, Gear Geometry and Applied Theory, Prentice Hall, NJ, (1994). 8. S.G. Dhande and J. Chakraborty, Curvature analysis of surfaces in higher pair, Part 1: An analytical investigation, ASME 2%ansactions, Journal of Engineering for Industry 98, 397-402, (1976). 9. S.G. Dhande and J. Chakraborty, Curvature analysis of surfaces in higher pair, Part 2: Application to spatial cam mechanisms, ASME Transactions, Journal of Engineering for Industry 98, 403-409, (1976). 10. J. Chakraborty and S.G. Dhande, Kinematics and Geometry of Planar and Spatial Mechanisms, Wiley, New York, (1977). 11. C.H. Chen, Formula of reduced curvature of two conjugate surfaces with conjugate motions of two degrees of freedom, In Proceedings of the flh World Congress on Theory of Machines and Mechanisms, pp. 842-845, (1983). 12. D.R. Wu and J.S. Luo, A Geometric Theory of Conjugate Tooth Surfaces, World Scientific, (1992). 湘潭大學興湘學院畢業設計工作中期檢查表系 機電系 專業 機械設計制造及其自動化 班級 機械二班 姓 名余啟良學 號2006183928指導教師胡自化指導教師職稱教授題目名稱弧面凸輪數控轉臺的設計機械部分題目來源 科研 企業 其它課題名稱8噸絞磨變速器設計題目性質 工程設計 理論研究 科學實驗 軟件開發 綜合應用 其它資料情況1、選題是否有變化 有 否2、設計任務書 有 否3、文獻綜述是否完成 完成 未完成4、外文翻譯 完成 未完成由學生填寫目前研究設計到何階段、進度狀況:了解了弧面凸輪在國內外的發展現狀,弧面凸輪分度機構的主要優缺點及其應用情況。在現有的研究基礎上深入了解了弧面凸輪的基本結構類型,弧面凸輪的廓面方程、嚙合方程的推導過程,進行了弧面凸輪的造型設計。由老師填寫工作進度預測(按照任務書中時間計劃) 提前完成 按計劃完成 拖后完成 無法完成工作態度(學生對畢業論文的認真程度、紀律及出勤情況): 認真 較認真 一般 不認真質量評價(學生前期已完成的工作的質量情況) 優 良 中 差存在的問題與建議: 指導教師(簽名): 年 月 日建議檢查結果: 通過 限期整改 緩答辯系意見: 簽名: 年 月 日注:1、該表由指導教師和學生填寫。2、此表作為附件裝入畢業設計(論文)資料袋存檔。 湘 潭 大 學 興湘學院 本科畢業設計開題報告題 目弧面凸輪數控轉臺的設計機械部分姓 名余啟良學號2006183928專 業機械設計制造及其自動化班級機械二班指導教師胡自化職稱教授填寫時間2010年4月22日 2010年4月說 明1根據湘潭大學畢業設計(論文)工作管理規定,學生必須撰寫畢業設計(論文)開題報告,由指導教師簽署意見,系主任批準后實施。2開題報告是畢業設計(論文)答辯委員會對學生答辯資格審查的依據材料之一。學生應當在畢業設計(論文)工作前期內完成,開題報告不合格者不得參加答辯。3畢業設計(論文)開題報告各項內容要實事求是,逐條認真填寫。其中的文字表達要明確、嚴謹,語言通順,外來語要同時用原文和中文表達。第一次出現縮寫詞,須注出全稱。4本報告中,由學生本人撰寫的對課題和研究工作的分析及描述,應不少于2000字。5開題報告檢查原則上在第24周完成,各系完成畢業設計開題檢查后,應寫一份開題情況總結報告。6. 填寫說明:(1) 課題性質:可填寫A工程設計;B論文;C. 工程技術研究;E.其它。(2) 課題來源:可填寫A自然科學基金與部、省、市級以上科研課題;B企、事業單位委托課題;C校級基金課題;D自擬課題。(3) 除自擬課題外,其它課題必須要填寫課題的名稱。(4) 參考文獻不能少于10篇。(5) 填寫內容的字體大小為小四,表格所留空不夠可增頁。本科畢業設計(論文)開題報告學生姓名余啟良學 號2006183928專 業機械設計制造及其自動化指導教師胡自化職 稱教授所在系機電系課題來源導師發布課題性質工程技術研究課題名稱弧面凸輪數控轉臺的設計機械部分一、選題的依據、課題的意義及國內外基本研究情況本設計是以新型傳動數控轉臺的的設計為研究平臺,針對弧面凸輪機構的設計仿真分析。由于生產工藝的要求,廣泛使用的各種自動機械中往往需要機構來實現周期性的轉位、分度動作,實現這種運動的機構稱為間歇機構。隨著自動機械向高速化、精密化、輕量化的方向發展,對間歇機構提出越來越高的要求。常用的間歇機構主要包括棘輪機構、槽輪機構、針輪機構、不完全齒輪機構及各種凸輪型間歇機構,其中前四種間歇機構由于分度定位精度低,運動不夠穩定,高速時有較大沖擊,只適用于低速、輕載的場合。凸輪型間歇機構結構簡單,能自動定位,動靜比可任意選擇,與傳統的幾種間歇機構相比,更適用于要求高速、高分度精度的場合,因而成為現代間歇機構發展的主要方向。采用弧面凸輪分度機構的弧面凸輪分度箱,它已成為當今世界上精密驅動的主流裝置。它具有高速性能好,運轉平穩,傳遞扭矩大,定位時自鎖,結構緊湊、體積小,噪音低、壽命長等顯著優點,是代替槽輪機構、棘輪機構、不完全齒輪機構等傳統間歇機構的理想產品。從參數化和可視化的虛擬設計技術出發,基于UG軟件, 建立了弧面分度凸輪機構的參數化設計、造型和運動仿真, 得出分度盤的轉速以及滾子與凸輪的嚙合力并進行分析,獲得比較直觀的結果.為弧面分度凸輪機構的運動性能研究和企業的產品優化設計提供研究參考。研究現狀:弧面分度凸輪機構是二十世紀20年代美國工程師C.N.Neklutin發明的,當時Neklutin稱此機構為滾子齒形凸輪分度機構。二十世紀50年代該機構由C.N.Neklutin所創辦的Ferguson公司首先進行了標準化系列化生產。我國從二十世紀七十年代末對該機構也開始了研制工作,在弧面分度凸輪機構的理論研究、設計制造等方面做了大量的工作?;∶娣侄韧馆啓C(jī)構從50年代開始投產以來,經過不斷改進,已成為應用最廣泛、產量最大的凸輪分度機構產品。二、研究內容、預計達到的目標、關鍵理論和技術、技術指標、完成課題的方案和主要措施本設計以新型傳動數控轉臺的的設計為研究平臺,針對弧面凸輪機構的設計仿真分析是整個弧面凸輪數控轉臺項目中的一個重要環節。課題組在詳細了解國內外在此方面的發展情況,并通過結合現在已開發的同類產品,在此基礎上進行優化設計,使產品性能更加優越,體積進一步減小。在項目研制過程中,我利用互聯網和學校圖書館詳細的了解了弧面凸輪的基本結構類型,廓面方程,嚙合規律等方面的知識,對現有的弧面凸輪進行了了解,查閱了有關資料。本課題在設計造型和動態的模擬仿真方面采用計算機輔助設計的技術,利用UG軟件及基于UG二次開發模塊建模,UG的動態仿真,進一步縮短了設計周期,降低了設計成本,有助于促進了設計工作的規范化、系列化和標準化,從而提高該產品設計開發能力。主要的工作內容有以下幾個方面:1)設計計算部分:在結合指導老師所給的數據的情況下,分析確定凸輪分度機構傳動方案;在了解了弧面凸輪的廓面方程、嚙合方程的基礎上通過計算分析,確定弧面凸輪的參數,校核弧面凸輪強度;完成弧面凸輪的嚙合齒輪的設計計算;在傳動部分設計完成后,進行轉臺的聯接設計及轉臺自鎖問題的解決。2)工程仿真分析部分:本論文利用三維軟件UG及基于UG二次開發模塊對弧面凸輪機構進行三維建模,畫出零件三維圖形;利用UG軟件對弧面凸輪機構模型進行模擬仿真;對內嚙合齒輪傳動進行動力學分析。三、主要特色及工作進度主要特色: 利用計算機輔助設計技術,基于UG及其二次開發模塊等軟件對理論設計的進行參數化建模,動態仿真和結構的優化設計。工作進度: 收集查閱了有關弧面凸輪的發展現狀、主要參數方程的推導等方面的資料,制定了設計提綱和計劃,完成了軟件的應用學習。四、主要參考文獻(按作者、文章名、刊物名、刊期及頁碼列出)1濮良貴,紀名剛. 機械設計M. 北京:高等教育出版社,2002.2胡宗武等. 非標準機械設備設計手冊M. 北京:機械工業出版社,2005.3楊冬香,陽大志. 基于不同滾子從動件類型的弧面凸輪CAD 集成系統開發J. 機電工程技術,2009.4葛正浩,蔡小霞,王月華. 應用包絡面理論建立弧面凸輪廓面方程J,2004.6張高峰,楊世平,陳華章,周玉衡,譚援強.弧面分度凸輪的三維CADJ.機械傳動,20037王其超,我國弧面分度凸輪機構研究的綜述及進展,機械設計,19978胡自化,張平. 連續分度空間弧面凸輪的多軸數控加工工藝研究J . 中國機程,2006 9張高峰,楊世平,陳華章,等. D-H 方法在弧面分度凸輪機構設計中的應用J . 機械傳動,2003 10張高峰楊世平,陳華章,周玉衡,譚援強. 弧面分度凸輪機構的研究與展望J.機械傳動,2003指導教師意 見指導教師簽名: 年 月 日系意見 系主任簽名: 年 月 日院意見 教學院長簽名: 年 月 日湘潭大學興湘學院畢業設計任務書論文(設計)題目: 弧面凸輪數控轉臺的設計機械部分 學號: 2006183928 姓名: 余啟良 專業:機械設計制造及其自動化 指導教師: 胡自化 系主任: 一、主要內容及基本要求 1.熟悉和掌握弧面凸輪傳動的工作原理。 2.進行弧面凸輪傳動數控轉臺的設計。 3.熟悉和理解弧面凸輪的結構參數。 4.使用AUTO CAD繪圖。 5.總結和撰寫畢業設計說明書一份。 6.翻譯相關外文資料一份。 二、重點研究的問題 1.熟悉和掌握弧面凸輪傳動數控轉臺相關性能方面的知識。 2.學習和使用AUTO CAD軟件。 3. 熟悉和理解弧面凸輪傳動機構的結構參數。 三、進度安排序號各階段完成的內容完成時間1 查閱資料、調研 第1-2周2 進行總體方案設計 第3周3 學習和使用Auto CAD軟件 第4-5周4 計算結構尺寸和數據 第6-10周5 使用Auto CAD軟件作圖 第11周6 撰寫畢業設計計算說明書 第12-13周7 答辯 第13周四、應收集的資料及主要參考文獻1濮良貴,紀名剛. 機械設計M. 北京:高等教育出版社,2002.2胡宗武等. 非標準機械設備設計手冊M. 北京:機械工業出版社,2005.3楊冬香,陽大志. 基于不同滾子從動件類型的弧面凸輪CAD 集成系統開發J. 機電工程技術,2009.4葛正浩,蔡小霞,王月華. 應用包絡面理論建立弧面凸輪廓面方程J,2004.6張高峰,楊世平,陳華章,周玉衡,譚援強.弧面分度凸輪的三維CADJ.機械傳動,20037王其超,我國弧面分度凸輪機構研究的綜述及進展,機械設計,19978胡自化,張平. 連續分度空間弧面凸輪的多軸數控加工工藝研究J . 中國機程,2006 9張高峰,楊世平,陳華章,等. D-H 方法在弧面分度凸輪機構設計中的應用J . 機械傳動,2003 10張高峰楊世平,陳華章,周玉衡,譚援強. 弧面分度凸輪機構的研究與展望J.機械傳動,2003
收藏