壓縮包內含有CAD圖紙和說明書,均可直接下載獲得文件，所見所得，電腦查看更方便。Q 197216396 或 11970985
充電器外殼的注塑模設計與制造
摘 要
本文主要介紹的是充電器外殼注塑模具的設計方法。首先分析了充電器外殼制件的工藝特點，包括材料性能、成型特性與條件、結構工藝性等，并選擇了成型設備。接著介紹了充電器外殼注塑模的分型面的選擇、型腔數目的確定及布置，重點介紹了澆注系統、成型零件、合模導向機構、脫模機構、定距分 型機構以及冷卻系統的設計。然后選擇標準模架和模具材料，并對注射機的工藝參數進行相關校核。最后對模具零件的加工進行了闡述。本文論述的充電器外殼注塑模具采用三板式結構，即澆注系統凝料和制件在不同的分型面脫出，采用一模二腔的型腔布置，最后利用推板將制件推出。
關鍵詞：充電器外殼；注塑模；三板模；澆注系統；脫模機構
The mold injection of charger shell
Abstract
The designing methods of injection mold of the charger shell are mainly introduced in this paper.First,the technological characteristics are analysed,including material properties,forming characteristics and conditions,the process of the structure,the forming equipment is selected.Then the parting line is selected,the number of cavities is determined.The specific introduction are made on gating system,cooling system,Molding parts,steering mechanism,Molding mechanism,and spacer parting institutions.Then the standard mold bases and mold materials are selected.and of the forming equipment is checked.Finally,the machining method of molding parts are analysed.
Threepence mold is used on the design of charger shell,that is pouring material and the plastic parts are ejected from different parting lines. There two four cavities in this mold, finally a stripper plate is used to push off the charger shells.
Key words:charger shell;injection mold;threepence mold;gating system;
Molding mechanism