【jxsj03】流量為130t每小時的立式蒸汽冷凝器的設計【過程裝備與控制工程優秀課程畢業設+含8張CAD圖紙+帶任務書+45頁加正文1.08萬字】

<p>流量為130t每小時的立式蒸汽冷凝器的設計【過程裝備與控制工程優秀課程畢業設+含8張CAD圖紙+帶任務書+45頁加正文1.08萬字】</p><p>【詳情如下】【需要咨詢購買全套設計請加QQ1459919609】</p><p>上管箱.dwg</p><p>上管箱管板.dwg</p><p>下管箱.dwg</p><p>下管箱管板.dwg</p><p>任務書.docx</p><p>圖紙總匯.dwg</p><p>墊片.dwg</p><p>拉桿1.dwg</p><p>拉桿2.dwg</p><p>文件清單.txt</p><p>流量為130t每小時的立式蒸汽冷凝器的設計.doc</p><p>裝配圖.dwg</p><p>摘要</p><p>&nbsp; 冷凝器它是使用范圍很廣的一種化工設備，屬于換熱器一種。本設計任務主要是根據已知條件選擇采用固定管板式換熱器的設計,固定管板式換熱器的優點是鍛件使用少，造價低；傳熱面積比浮頭式換熱器大20%到30且旁路滲流小。&nbsp;</p><p>&nbsp; 本臺換熱器主要完成的是水蒸氣-水之間的熱量交換,首先根據給出的設計溫度和設計壓力來確定設備的結構形式以及殼程和管程的材料，然后根據物料性質和傳熱面積來確定換熱管的材料，尺寸，根數。，設計壓力為管程2.31MPa，殼程0.935MPa，工作溫度管程50，殼程130，設計溫度管程80，殼程140，傳熱面積為256m2，采用25×2.5×3000的無縫鋼管換熱，則可計算出622根換熱管，D=1200mm的圓筒根據換熱管的根數確定換熱管的排列，并根據換熱管的排列和長度來確定筒體直徑以及折流板的選擇。</p><p><br/></p><p>通過對容器的內徑和內外壓的計算來確定殼體和封頭的厚度并進行強度校核。然后是對換熱器各部件的零部件的強度設計，有法蘭的選擇和設計計算與校核，鉤圈及浮頭法蘭的設計計算與校核和管子拉脫力的計算。還包括管板的結構設計、防沖擋板、滑道結構的設計以及支座設計。結構設計中的標準件可以參照國家標準根據設計條件直接選取；非標準件，設計完結構后必須進行相應的應力校核。</p><p>&nbsp; 管板與換熱管的連接方式為焊接，因管板上的應力較多，且內外溫度有一定的差值，因此，對管板強度的校核是一個重點，也是一個難點.</p><p>&nbsp;關鍵詞： &nbsp;換熱器； &nbsp;強度設計； &nbsp;結構設計</p><p>Abstract</p><p>&nbsp; The condenser is a kind of chemical equipment which is widely used, and belongs to a kind of heat exchanger. The design task is mainly according to the known conditions to choose the design of fixed tube plate heat exchanger, the advantages of fixed tube plate heat exchanger is forging used less, low cost; heat transfer area ratio of floating head type for heat exchanger is 20% to 30% and a bypass flow small.</p><p>The heat exchanger is mainly completed is between water vapor and water heat exchange, first of all according to the given design temperature and pressure to determine structure of equipment and the shell side and tube side material, and then according to the nature of the material and the heat transfer area to determine the heat exchange tube materials, dimensions, number of roots. And design pressure for tube side 2.31MPa, shell 0.935MPa, the working temperature of the tube process 50 DEG C, 130 DEG C shell, design temperature tube process at a temperature of 80 DEG C, shell and 140 DEG C, heat transfer area for 256m2. The phi 25 x 2.5 x 3000 seamless steel pipe heat exchanger can be calculated 622 heat exchange tube, D=1200mm cylindrical root according to determine the root number of heat exchange tube heat exchanger tube arrangement and according to the arrangement and length of heat exchange tube to determine cylinder diameter and baffle the choice. Determine the thickness of the shell and the head and carry out the intensity verification by calculating the inner diameter and the internal pressure of the container. Then the strength design of components of the various components of the heat exchanger, flange design, selection and calculation and checking, hook and loop and floating head flange design calculation and checking of the pipe and pull off force calculation. Also includes a tube plate structure design, anti scour baffle, slideway structure design and the design of support. The standard parts in the structure design can be selected directly according to the national standards; the non standard parts must be checked for the corresponding stress after the design of the structure.</p><p>Tube plate and tube heat exchanger and the connection mode of welding, tube plate more stress, and the temperature inside and outside have certain difference. Therefore, on the tube sheet strength check is a key and a difficulties.</p><p>Keywords: &nbsp;heat exchanger； &nbsp;strength design； &nbsp;structure design</p><p>目 &nbsp;錄</p><p>第一章傳統工藝計算<span class="Apple-tab-span" style="white-space:pre"></span>1</p><p>1.1工藝計算<span class="Apple-tab-span" style="white-space:pre"></span>1</p><p>1.1.1介質原始數據<span class="Apple-tab-span" style="white-space:pre"></span>1</p><p>1.1.2介質定性溫度及物性參數<span class="Apple-tab-span" style="white-space:pre"></span>1</p><p>1.2 傳熱量與水蒸汽流量計算<span class="Apple-tab-span" style="white-space:pre"></span>2</p><p>1.3 有效平均溫差計算<span class="Apple-tab-span" style="white-space:pre"></span>3</p><p>1.4管程換熱系數計算<span class="Apple-tab-span" style="white-space:pre"></span>4</p><p>1.5 管程結構初步設計<span class="Apple-tab-span" style="white-space:pre"></span>5</p><p>1.6殼程換熱系數計算<span class="Apple-tab-span" style="white-space:pre"></span>5</p><p>1.7總傳熱系數計算<span class="Apple-tab-span" style="white-space:pre"></span>6</p><p>1.8管壁溫度計算<span class="Apple-tab-span" style="white-space:pre"></span>7</p><p>1.9管程壓力降計算<span class="Apple-tab-span" style="white-space:pre"></span>8</p><p>1.10殼程壓力降計算<span class="Apple-tab-span" style="white-space:pre"></span>8</p><p>第二章強度計算<span class="Apple-tab-span" style="white-space:pre"></span>11</p><p>2.1結構設計說明書<span class="Apple-tab-span" style="white-space:pre"></span>11</p><p>2.1.1換熱管材料及規格的選擇和根數的確定<span class="Apple-tab-span" style="white-space:pre"></span>11</p><p>2.1.2布管方式的選擇<span class="Apple-tab-span" style="white-space:pre"></span>11</p><p>2.1.3筒體內徑的確定<span class="Apple-tab-span" style="white-space:pre"></span>11</p><p>2.1.4筒體壁厚的確定<span class="Apple-tab-span" style="white-space:pre"></span>12</p><p>2.1.5封頭形式的確定<span class="Apple-tab-span" style="white-space:pre"></span>12</p><p>2.1.6管箱短節壁厚計算<span class="Apple-tab-span" style="white-space:pre"></span>13</p><p>2.1.7容器法蘭的選擇<span class="Apple-tab-span" style="white-space:pre"></span>13</p><p>2.1.8管板尺寸的確定及強度計算<span class="Apple-tab-span" style="white-space:pre"></span>14</p><p>2.1.9是否安裝膨脹節的判定：<span class="Apple-tab-span" style="white-space:pre"></span>26</p><p>2.1.10各管孔接管及其法蘭的選擇：<span class="Apple-tab-span" style="white-space:pre"></span>26</p><p>2.1.11設備法蘭的選擇<span class="Apple-tab-span" style="white-space:pre"></span>30</p><p>2.1.12拉桿和定距管的確定<span class="Apple-tab-span" style="white-space:pre"></span>31</p><p>2.1.13開孔補強計算：<span class="Apple-tab-span" style="white-space:pre"></span>32</p><p>2.2筒體管箱耐壓試驗的應力校核計算<span class="Apple-tab-span" style="white-space:pre"></span>34</p><p>2.2.1筒體核算<span class="Apple-tab-span" style="white-space:pre"></span>34</p><p>2.2.2、支座的選擇及應力校核<span class="Apple-tab-span" style="white-space:pre"></span>35</p><p>2.2.3 耳座的應力校核<span class="Apple-tab-span" style="white-space:pre"></span>36</p><p>參考文獻<span class="Apple-tab-span" style="white-space:pre"></span>39</p><p>致 謝<span class="Apple-tab-span" style="white-space:pre"></span>40</p><p><img src="http:/m.appdesigncorp.com/ueditor_s/net/upload/2017-5/30/6363177188691287717947705_1.gif" style="float:none;" title="墊片.gif"/></p><p><img src="http:/m.appdesigncorp.com/ueditor_s/net/upload/2017-5/30/6363177188706887733432846_1.gif" style="float:none;" title="拉桿1.gif"/></p><p><img src="http:/m.appdesigncorp.com/ueditor_s/net/upload/2017-5/30/6363177188722487767917988_1.gif" style="float:none;" title="拉桿2.gif"/></p><p><img src="http:/m.appdesigncorp.com/ueditor_s/net/upload/2017-5/30/6363177188742767808389037_1.gif" style="float:none;" title="上管箱.gif"/></p><p><img src="http:/m.appdesigncorp.com/ueditor_s/net/upload/2017-5/30/6363177188766167841616748_1.gif" style="float:none;" title="上管箱管板.gif"/></p><p><img src="http:/m.appdesigncorp.com/ueditor_s/net/upload/2017-5/30/6363177188786447876385969_1.gif" style="float:none;" title="下管箱.gif"/></p><p><img src="http:/m.appdesigncorp.com/ueditor_s/net/upload/2017-5/30/6363177188808287911086264_1.gif" style="float:none;" title="下管箱管板.gif"/></p><p><img src="http:/m.appdesigncorp.com/ueditor_s/net/upload/2017-5/30/6363177188828567951557313_1.gif" style="float:none;" title="裝配圖.gif"/></p><p><img src="http:/m.appdesigncorp.com/ueditor_s/net/upload/2017-5/30/6363177188920608117238914_1.png" style="float:none;" title="360桌面截圖20170530195742.png"/></p><p><img src="http:/m.appdesigncorp.com/ueditor_s/net/upload/2017-5/30/6363177190742691318243763_1.png" style="float:none;" title="360桌面截圖20170530195810.png"/></p><p><img src="http:/m.appdesigncorp.com/ueditor_s/net/upload/2017-5/30/6363177192173213821890838_1.png" style="float:none;" title="360桌面截圖20170530195816.png"/></p><p><img src="http:/m.appdesigncorp.com/ueditor_s/net/upload/2017-5/30/6363177192352614143969961_1.png" style="float:none;" title="360桌面截圖20170530195825.png"/></p><p><img src="http:/m.appdesigncorp.com/ueditor_s/net/upload/2017-5/30/6363177192396294216668722_1.png" style="float:none;" title="360桌面截圖20170530195832.png"/></p><p><br/></p><p><br/></p>