溫控器墊塊的注塑模具設計【點澆口一模一腔注射模優秀課程畢業設計含UG三維10張CAD圖紙帶任務書+開題報告+外文翻譯】-zsmj30
<p>溫控器墊塊的注塑模具設計【點澆口一模一腔注射模優秀課程畢業設計含UG三維10張CAD圖紙帶任務書+開題報告+外文翻譯】-zsmj30</p><p>溫控器墊塊的注塑模具設計【點澆口一模一腔注射模】</p><p>摘 要</p><p>近幾年好多國家都在發展機械行業,與機械相關的各個行業都越來越重視CAD/CAM技術,如今CAD/CAM技術已發展成為一項比較成熟的共性技術,我國家電工業的高速發展對模具工業,尤其是塑料模具提出了越來越高的要求,國內塑料模具市場以注塑模具需求量最大,其中發展重點為工程塑料模具。同時還因為塑料制品及模具的3D設計與成型過程中3D分析正在塑料模具工業中發揮越來越重要的作用。 </p><p>在本次畢業設計中,通過運用三維實體造型高端軟件UG NX對“溫控器墊塊”外形進行3D造型,同時也設計了其塑料注塑模的3D模型。在正確分析塑件工藝特點和ABS的性能的基礎上,介紹了對凸模,凹模,澆注系統,脫模機構,頂也機構的設計,選擇標準零件,設計非標件的設計過程。由于模具生產的塑料制品具有高精度、高復雜程度、高一致性、高生產率和低消耗等特點,涉及模具結構、強度、壽命計算及熔融塑料在模具中流動預測等復雜的工程運算問題;CAD、UG NX等不同的軟件可分別用于模具的設計、制造和產品質量進行分析。塑料注射成型所用的模具稱為注射模成型模具,該模具特點是模具先由注射機合模機構閉和緊密,然后由注射機注射裝置將高溫高壓的塑料熔體注入模腔內,經冷卻或固化成型后,在側向分型的作用下開模取出塑件。還根據所設計的模具尺寸選擇安裝了相應的模架,最終生成了直觀的結構設計圖;此外還利用CAD繪制了模具裝配圖以及各種成型零件圖。</p><p>關鍵詞:溫控器;注塑模;CAD/CAM;ABS塑料;3D</p><p>Abstract</p><p>A lot of countries in the development of machinery industry in recent years, every industry pay more and more attention to related to mechanical CAD/CAM technology, CAD/CAM technology has now developed into a relatively mature technology, with the rapid development of our country home a ABS liance industry of mold industry, puts forward higher and higher requirements, especially plastic mould, in 2004, as a proportion of the plastic mold in the mold industry has risen to 30%, according to experts predict that in the next few years, China plastic mould industry will continue to maintain an annual growth rate of more than 10% of the high speed of development. Domestic demand in injection mold plastic mold market is the largest, the key for engineering plastic mold development. Also because of the plastic products and mould Three-Dimensional design and molding process of Three-Dimensional analysis is the plastic mold industry plays a more and more important role. </p><p>In this graduation design, the high-end software UG NX three-dimensional entity model is used to shape of "t type mounting bracket" Three-Dimensional modeling, and design the Three-Dimensional model of the plastic injection mold.On the basis of the correct analysis of the characteristics and ABS plastic parts process performance, the introduction of the punch,die,casting system, stripping agencies,top agency also design, selection of standard parts,the design of non-standard parts of the design process.Due to mold plastic products with high precision,high complexity,high consistency,high productivity and low consumption, etc,involve mold structure, strength,life span,and the molten plastic in the mold flow projections and other complex engineering computing problems; CAD,different software may be designed such UG NX molds are used,the manufacturing and product quality analysis.Plastic injection molding mold used for injection molding is called a mold injection machine is characterized first by a mold clamping mechanism and tightly closed, and then the injection machine injection device of the high temperature and pressure of the plastic melt into the mold cavity, cooling or after curing,in the role of the lateral parting remove mold plastic parts.Also according to the design of the mould size choose to install the corresponding mold frame, the resulting intuitive structure design; In addition to use CAD draw the mold assembly drawing as well as a variety of molding part drawing.</p><p>Key words:Thermostat;plastics mold;CAD/CAM;ABS plastic;Three-Dimensional</p><p>目 錄</p><p>引言<span class="Apple-tab-span" style="white-space:pre"></span>1</p><p>1 注塑模設計的相關理論概述<span class="Apple-tab-span" style="white-space:pre"></span>3</p><p>1.1 注塑成型的相關概念<span class="Apple-tab-span" style="white-space:pre"></span>3</p><p>1.1.1 注塑成型的基本概念<span class="Apple-tab-span" style="white-space:pre"></span>3</p><p>1.1.2 注塑成型的特點<span class="Apple-tab-span" style="white-space:pre"></span>3</p><p>1.1.3 注塑成型的工藝過程<span class="Apple-tab-span" style="white-space:pre"></span>3</p><p>1.2 注塑模的定義<span class="Apple-tab-span" style="white-space:pre"></span>4</p><p>1.3 注塑模的分類<span class="Apple-tab-span" style="white-space:pre"></span>4</p><p>1.4 注塑模設計流程及關鍵環節<span class="Apple-tab-span" style="white-space:pre"></span>6</p><p>1.5 注塑模設計軟件UG簡介<span class="Apple-tab-span" style="white-space:pre"></span>7</p><p>1.6 注塑模主要加工方法簡介<span class="Apple-tab-span" style="white-space:pre"></span>9</p><p>2 溫控器墊塊注塑模設計<span class="Apple-tab-span" style="white-space:pre"></span>10</p><p>2.1 溫控器墊塊相關參數計算<span class="Apple-tab-span" style="white-space:pre"></span>10</p><p>2.2 溫控器墊塊成型工藝要求<span class="Apple-tab-span" style="white-space:pre"></span>10</p><p>2.2.1 塑件工藝性分析<span class="Apple-tab-span" style="white-space:pre"></span>10</p><p>2.2.2 塑件材料的基本特性<span class="Apple-tab-span" style="white-space:pre"></span>11</p><p>2.2.3 ABS的性能指標<span class="Apple-tab-span" style="white-space:pre"></span>11</p><p>2.2.4 塑件材料成型性能<span class="Apple-tab-span" style="white-space:pre"></span>11</p><p>2.2.5 尺寸精度分析<span class="Apple-tab-span" style="white-space:pre"></span>11</p><p>2.2.6 表面質量分析<span class="Apple-tab-span" style="white-space:pre"></span>11</p><p>2.2.7 模塑設備的選擇<span class="Apple-tab-span" style="white-space:pre"></span>12</p><p>2.3 注射模的結構設計<span class="Apple-tab-span" style="white-space:pre"></span>13</p><p>2.3.1 分型面的選擇<span class="Apple-tab-span" style="white-space:pre"></span>13</p><p>2.3.2 確定型腔的排列方式<span class="Apple-tab-span" style="white-space:pre"></span>13</p><p>2.3.3 澆注系統的設計<span class="Apple-tab-span" style="white-space:pre"></span>14</p><p>2.3.4 澆注系統的平衡<span class="Apple-tab-span" style="white-space:pre"></span>16</p><p>2.3.5 推件機構的設計<span class="Apple-tab-span" style="white-space:pre"></span>16</p><p>2.4 模架的選擇<span class="Apple-tab-span" style="white-space:pre"></span>17</p><p>2.5 型腔工作尺寸的計算<span class="Apple-tab-span" style="white-space:pre"></span>17</p><p>2.6 型芯工作尺寸的計算<span class="Apple-tab-span" style="white-space:pre"></span>19</p><p>2.7 模具的其他相關計算<span class="Apple-tab-span" style="white-space:pre"></span>20</p><p>2.8 冷卻裝置的設計<span class="Apple-tab-span" style="white-space:pre"></span>20</p><p>2.8.1 冷卻時間的計算<span class="Apple-tab-span" style="white-space:pre"></span>21</p><p>2.8.2 冷卻水管直徑<span class="Apple-tab-span" style="white-space:pre"></span>21</p><p>2.8.3 冷卻水道的結構<span class="Apple-tab-span" style="white-space:pre"></span>21</p><p>2.9 開模行程的校核<span class="Apple-tab-span" style="white-space:pre"></span>22</p><p>2.10 注射機的校核<span class="Apple-tab-span" style="white-space:pre"></span>22 </p><p>2.11 模具外形尺寸校核<span class="Apple-tab-span" style="white-space:pre"></span>22</p><p>2.12 注射模的安裝與調試<span class="Apple-tab-span" style="white-space:pre"></span>23</p><p>3 溫控器墊塊注塑模的仿真實現<span class="Apple-tab-span" style="white-space:pre"></span>24</p><p>3.1 模具開發流程<span class="Apple-tab-span" style="white-space:pre"></span>24</p><p>3.2 產品建模<span class="Apple-tab-span" style="white-space:pre"></span>24</p><p>3.3 溫控器注塑模裝配仿真<span class="Apple-tab-span" style="white-space:pre"></span>25</p><p>4 溫控器墊塊注塑模型腔加工工藝及流程<span class="Apple-tab-span" style="white-space:pre"></span>28</p><p>5 機械加工工藝卡<span class="Apple-tab-span" style="white-space:pre"></span>30</p><p>6 結論<span class="Apple-tab-span" style="white-space:pre"></span>31</p><p>致 謝<span class="Apple-tab-span" style="white-space:pre"></span>32</p><p>參考文獻<span class="Apple-tab-span" style="white-space:pre"></span>33</p><p>【詳情如下】【需要咨詢購買全套設計請加QQ1459919609】</p><p>024.prt</p><p>024.stp</p><p>sujian.prt</p><p>sujian.stp</p><p>圖紙總匯.dwg</p><p>型腔.dwg</p><p>型腔固定板.dwg</p><p>型芯.dwg</p><p>型芯固定板.dwg</p><p>塑件.dwg</p><p>外文譯文(中文).doc</p><p>外文譯文(英文).doc</p><p>定模座板.dwg</p><p>推件板.dwg</p><p>支撐板.dwg</p><p>文件清單.txt</p><p>溫控器墊塊點澆口注射模的設計任務書.doc</p><p>溫控器墊塊點澆口注射模的設計開題報告.doc</p><p>溫控器墊塊的注塑模具設計【點澆口一模一腔注射?!?doc</p><p>脫料板.dwg</p><p>裝配圖.dwg</p><p><img src="http:/m.appdesigncorp.com/ueditor_s/net/upload/2017-8/21/6363893216346348631607662_1.gif" style="float:none;" title="塑件.gif"/></p><p><img src="http:/m.appdesigncorp.com/ueditor_s/net/upload/2017-8/21/6363893216388468711077178_1.gif" style="float:none;" title="裝配圖.gif"/></p><p><img src="http:/m.appdesigncorp.com/ueditor_s/net/upload/2017-8/21/6363893216468028858732129_1.jpg" style="float:none;" title="三維線框圖.jpg"/></p><p><img src="http:/m.appdesigncorp.com/ueditor_s/net/upload/2017-8/21/6363893216578789047357362_1.jpg" style="float:none;" title="三維裝配圖.jpg"/></p><p><img src="http:/m.appdesigncorp.com/ueditor_s/net/upload/2017-8/21/6363893216705149265765908_1.jpg" style="float:none;" title="設計所包含文件.jpg"/></p><p><img src="http:/m.appdesigncorp.com/ueditor_s/net/upload/2017-8/21/6363893216792509422163430_1.jpg" style="float:none;" title="設計字數統計.jpg"/></p><p><img src="http:/m.appdesigncorp.com/ueditor_s/net/upload/2017-8/21/6363893216875189562575043_1.jpg" style="float:none;" title="塑件內面.jpg"/></p><p><img src="http:/m.appdesigncorp.com/ueditor_s/net/upload/2017-8/21/6363893216957869717284829_1.jpg" style="float:none;" title="塑件正面.jpg"/></p><p><img src="http:/m.appdesigncorp.com/ueditor_s/net/upload/2017-8/21/6363893216981269759512540_1.gif" style="float:none;" title="定模座板.gif"/></p><p><img src="http:/m.appdesigncorp.com/ueditor_s/net/upload/2017-8/21/6363893217031189842426454_1.gif" style="float:none;" title="推件板.gif"/></p><p><img src="http:/m.appdesigncorp.com/ueditor_s/net/upload/2017-8/21/6363893217081109928638540_1.gif" style="float:none;" title="脫料板.gif"/></p><p><img src="http:/m.appdesigncorp.com/ueditor_s/net/upload/2017-8/21/6363893217134150027607289_1.gif" style="float:none;" title="型腔.gif"/></p><p><img src="http:/m.appdesigncorp.com/ueditor_s/net/upload/2017-8/21/6363893217191870122561946_1.gif" style="float:none;" title="型腔固定板.gif"/></p><p><img src="http:/m.appdesigncorp.com/ueditor_s/net/upload/2017-8/21/6363893217232430193504044_1.gif" style="float:none;" title="型芯.gif"/></p><p><img src="http:/m.appdesigncorp.com/ueditor_s/net/upload/2017-8/21/6363893217285470282472792_1.gif" style="float:none;" title="型芯固定板.gif"/></p><p><img src="http:/m.appdesigncorp.com/ueditor_s/net/upload/2017-8/21/6363893217332270366928216_1.gif" style="float:none;" title="支撐板.gif"/></p><p><br/></p>