塑料模具文獻綜述

1、塑料在國民經濟的多個領域中得到廣泛的應用 ,而它的產量按體積計算在世界上已超過了鋼鐵的產量。同時 , 塑料模具是塑料成型加工中不可缺少的工具 , 在總的模具產量中所占的例逐年增加 , 在當前已處于重要位置。在我國塑料模具的應用在國民經濟中的地位愈來愈重要。它的鋼材耗用量大 , 品種規格多 , 形狀復雜 , 表面粗糙度值要求低 , 制造難度大。因此 , 探討塑料模具的制造中的選用材料與熱處理問題 , 綜合分析其工作條件、失效、性能 , 合理選用材料與熱處理以及提高它的使用壽命 , 保證制件質量 ,降低制造成本顯得非常重要。 1、塑料模 。

2、外文文獻翻譯 第 1 頁 共 13 頁 to in of to to AD it 0, he AD is an is a in 5 AD AD is to to AD of t in AD 1, AD he of of of to , , go to a of to AD Is to a to of 外文文獻翻譯 第 2 頁 共 13 頁 to 2, AD of of he is of a is a to of s to to on of to a of a ts to is a on of , to to to to of to a as。

3、南京理工大學泰州科技學院 畢業設計 (論文 )外文資料翻譯 學院 (系 )： 機械工程學院 專 業： 機械工程及自動化 姓 名： 張運濤 學 號： 0601510167 外文出處： AD 附 件： 指導教師評語： 簽名： 年 月 日 注： 請將該封面與附件裝訂成冊。 (用外文寫 ) 附件 1：外文資料翻譯譯文 塑料模具 成技術 內容提要 ： 通過分析計算機輔助注射模設計和制造的各個環節中共享的技術和信息，本文揭示了注射模 集成技術的根本 內涵，并提出了它的研究熱點和趨勢。 引言 模具 是一項用高技術改造模具傳統技術的重要關鍵技術。從六五計劃開始 ,我國有許。

4、外文科技文獻譯文 裝 訂 線 1 塑料制品與塑料模具的發展趨勢 1、塑料產業 改革開放以來，塑料制品加工產業在我國以平均每年百分之十的速度迅速發展，與 平均增長點相比，要高出 3到 5個百分點。現在，我國塑料制品已經進軍到了世界發達國家的水平，每年塑料產品的產量躍居世界第二，而且形成了完整的產業分類系統。 隨著塑料制品的應用領域不斷擴大，在未來 10年世界塑料制品的產量將在每年 3的的速度增加，在 2010年世界塑料產品的總?cè)萘繉⒏哌_(dá) 186萬噸。我國對塑料制品越來越大的需求將不斷，塑料產品的生產將在每年 10的的速度增加，據。

5、0前言機械工業是國民的裝備部，是為國民經濟提供裝備和為人民生提供耐用消費品的產業。機械工業的規模和技術水平是衡量國家經濟實力和科學技術水平的要標志。因此，世界各國都把發展機械工業作為發展本國經濟的戰略重點之一1。生產水平及科學技術的不斷進步與發展帶動了整個機械工業的快速發展?，F(xiàn)代工業中，生產過程的機械化，自動化已成為突出的主題。然而在機械工業中，加工、裝配等生產是不連續的。單靠人力將這些不連續的生產工序接起來，不僅費時而且效率不高。同時人的勞動強度非常大，有時還會出現失誤及傷害2。顯然，這嚴重影響。

6、塑料模具CAD集成技術 摘要：通過分析計算機輔助注射模設計和制造的各個環節中共享的技術和信息，本文揭示了注射模CAD的集成技術的根本內涵，并提出了它的研究熱點和趨勢。 關鍵詞： 計算機輔助；CAD；設計制造 1.塑料模具CAD集成技術 塑料模具的制造，包括塑料產品的造型設計、模具的結構設計及分析、模具的數控加工(銑削、電加工、線切割等)、拋光和配試模以及快速成形制造等。各個環節所涉及的CAD單。

7、1 塑料模具 的 編制和使用 M. 華聯 膏模具被廣泛用于鑄造 陶瓷行業所需的用具。除了 具有一定的優勢，由于它們工作表面下穿在體內的水分和電解質的行動，所以還具有 機械強度低，工作壽命短 的好處 。除此之外，在烘干機的溫度不能高于 65 度，高于此溫度石膏 將被銷毀。 陶瓷產業開始安裝時，尋找替代石膏的必要性增加為半自動成型和干燥加劇干燥條件機。我們的工廠 1967 年開始搜索替代石膏 ，并為此組織了一個研究小組 ，其 中 包含以下工人： 利亞科夫，電訊管理局局長 吉尼亞州 I. 其他人。 該研究小組在 國家陶瓷研究的數據指導研究。

8、F . B. in a to of of in in be 5 as is of a a in 967, to a A. V. P. S. T. A. V. A. A. V. F. I. At of by 1. a of of to so as to in of of to of to to of to by on of 969 VC of to At in of 00 mm 00 mm as as a 00 500 24 h). of 500 of in 000 be of in A in 969 (1). or is of of It is a no o. 0056 of g/. At a 70kg/) in of is a on 0 an .5 is 5is an of of of of is of It be by of in of is 2) is 5 t. 3 be i 3, 71972. 9 1972 a 227 g/7N. Y. 10011. be of A of is 147 ,3 500 l 2 3 45 6 O 9 8 7 I 2 I. i) 2)。

9、ed 0s ic of 00 008.1%of It m of sm im im y, of e is m em m em 0,000m of m of m m sm 00m 0or At e e, e, m m As am m m of V, m of m of m e of es It er m sm m m m At of m m of m m m m 1,480m m 7,600m m of it is s is m e 006, s of m m 4%of m m of m sm of m of m e m e 1, 2007, e m。

10、s s s to a at 8V 6.5 kg of as as is of o., K CD VD of a of of to as a of to mm of a up of of so m, up 0 30 up 0 10 of at in or in a of of to a of to a of In of at is is of to at s to , to to of is In TO on to to to In of up 0 of m, of to a of 800, up m/of of In to AM P/RT of as is of of In of of IC As to is on of of on is of of of is a of of is of is at 0 00 to is an Of a to of to in (1) is or to of is a of 0 (2) is of of in of of is of is is to or of it be to (3) is is On of is on。

11、南華大學船 山學院畢業設計（論文） 附 錄 1 英文原文 AD to in of to to AD it 0, he AD is an is in 5 AD AD is to to AD of t in AD 1, AD he of of of to I I , , go to a of 南華大學船 山學院畢業設計（論文） to AD Is to a to of to 2, AD of of he is of U a is a to of is to to on of to a of a ts to is a on of , to to to to of to a as to of U a of AD of in to up 南華大學船 山學院畢業設計（論文） of of at of of to of of AD is of is of i of is i in of of to of is of is E, in of is is to of AD is is a it be 。

12、外文翻譯 外文翻譯 原文： to is in is to In of is by to a on a or It is to is by of It is of 0% of be by a is of of In is a of it is a of of is in of in of of of is of to a in 外文翻譯 to or in of or a as of is A or of 1. or . or . 4. . an in by of of to As is to or is it to in to is 5%98% is to as is to or it to as To is is to be be or be in or by of 外文翻譯 is is in of on s is to as a。

13、射成型 射成型 注塑主要用于生產熱塑性塑料零件，也是最原始的方法之一。目前注塑占所有塑料樹脂消費量的 30%。典型的注塑成型產品“塑料杯、容器、外殼、工具手柄、旋鈕、電氣和通信組件 (如電話接收器 )、玩具、和水暖配件。 聚合物熔體由于其分子量具有很高的粘度；它們不能像金屬液在重力的條件下倒進模 ,必須在高壓力下注入模具。因此 ,金屬鑄造的力學性能是由模具壁傳熱的速度決定，同時也決定了在最終鑄件的晶粒尺寸和晶粒取向 , 高壓注射成型過程中熔體的注射剪切力產生的主要原因是材料最后的分子取向。力學性能影 響成品都是因。

14、1 A is a a Ax of of of of AE to of of is of to of as as 1. is to be in a by by a of a to of et 2 a AD on . et 3 an of of of of a of be 2 in a at 4, 5 a D on a of In it is to of a of a of It of et 6, 7 of AE of AD AE of a of a AE of is of a as , so ec et 8, 9 a is on is 3 1 of no Ax is et 10 a et 11 4 a D a AD to an in of of of et 12 an of of of BS as A by P. of in as of up of as et 13, 14 an BS at 15 an a of a PI AD/to of is as a D as do of et 16 a of AM AE of o。